| |
![]() | |
| | #1 (permalink) |
| Custom Title Allowed! ![]() Current Rebreather/s: | Vr3 IR link Hello all, I am trying to get my Vr3 IR link! ANd have some questions for those who sweared @#$% before me ![]() 1. How can I know that that pin has been accepted ? My Vr3 shows tx CCXB3P CODE on Pin entry screen 2. In instructions you must set Choose Full = 0 IR = 1 in the PC link screen if connecting to your PC by Infra Red link I can only see the Full=0 but cannot find the IR value 3. Vr3 is connecting to PC but when I ask it to download, it start download and no profiles are found in software! Anyone can help ? Regards Pierre Farrugia
__________________ Pierre Farrugia My wife told me " If you don't quit diving I'm going to leave you" My reply " God, I'll miss you" ![]() www.atlam.org www.divemed.com |
| (Offline) | |
| | #2 (permalink) |
| Fighting Girl Current Rebreather/s: Sport Kiss Other Rebreather/s: Join Date: May 2005 Location: Land of Oz
Posts: 573
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | Re: Vr3 IR link Quote: (Originally Posted by Pierre Farrugia) Hello all, These things can be the very devil to get to work. I am no expert but here goes:I am trying to get my Vr3 IR link! ANd have some questions for those who sweared @#$% before me ![]() 1. How can I know that that pin has been accepted ? My Vr3 shows tx CCXB3P CODE on Pin entry screen 2. In instructions you must set Choose Full = 0 IR = 1 in the PC link screen if connecting to your PC by Infra Red link I can only see the Full=0 but cannot find the IR value 3. Vr3 is connecting to PC but when I ask it to download, it start download and no profiles are found in software! Anyone can help ? Regards Pierre Farrugia 1. I believe that if there is a capital "P" in the code you do have the PIN installed correctly. From Simon "If there is no capital letter P in that line, it means you are missing the PIN to permit you to download dives." 2. Depending on the software version some have have the IR option and some don't. For example, my one with v3.0 software does have it but my one with v2.1 software doesn't. 3. Yes I have had this problem too :-( I assume you have followed the instructions on the FAQ at http://www.mssystems.co.uk/prodive/support/index.htm There is also a forum at http://www.vr3.co.uk/forum/index.php which to be honest I found less than helpful as it was largely populated by people with the same problems as me and no solutions :-) If all of this fails to work contact Simon at deltasupport@aol.com . I found him very helpful and he did fix the problem.
__________________ Andrew Bowie Rebreather-friendly Buddy |
| (Offline) | |
| | #3 (permalink) |
| Moderator ![]() ![]() Current Rebreather/s: | Re: Vr3 IR link Quote: (Originally Posted by abowie) 2. Depending on the software version some have have the IR option and some don't. For example, my one with v3.0 software does have it but my one with v2.1 software doesn't. You forgot to mention that you gave me the computer first, to spend many many hours trying to get the bloody thing working, and after almost putting the bloody thing through the window, you found out that it wasn't enabled...These things can be MOST frustrating when they're not working... ![]() |
| (Online) | |
| | #4 (permalink) |
| Fighting Girl Current Rebreather/s: Sport Kiss Other Rebreather/s: Join Date: May 2005 Location: Land of Oz
Posts: 573
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | Re: Vr3 IR link Quote: (Originally Posted by sadave) You forgot to mention that you gave me the computer first, to spend many many hours trying to get the bloody thing working, and after almost putting the bloody thing through the window, you found out that it wasn't enabled... That's because I assumed that you were clever than me and would be able to tell.These things can be MOST frustrating when they're not working... ![]()
__________________ Andrew Bowie Rebreather-friendly Buddy |
| (Offline) | |