Anyone has ProLog software?

robinzon · 27th May 2007, 19:22

Hey all,

I was wondering if anyone has the ProLog software. I already have the PC Link PIN and ProDive but now in dire need to download PINS off of my computer and need ProLog (and a cable for that matter for which I am fervently looking now). If so let me know if you can send it. Alternativly if anyone is in New York area with the software/cable let me know (pref. Brooklyn/Manhattan).

Thanks

Barrie Law · 27th May 2007, 23:08

Hi Robinzon,

The Prolog has been replaced by the new Prolink 2007 and you can download the software from here;

http://www.ccrb.co.uk/vrdownloads.html

You can use your existing pin number with the new software and I have attached a picture of the cable that is now available to connect to your PC via the 7 pin I/O connector, the software also comes with the lead as shown.

Regards

robinzon · 28th May 2007, 10:01

Yeah well all I need then is the cable, which I certainly do not have and spending $259 on it just doe not sound like fun... though I saw cables separately somewhere. Besides can PINs be downloaded from soft 2.0CXR ?

thanks

Quote: (Originally Posted by Barrie Law)

Hi Robinzon,

The Prolog has been replaced by the new Prolink 2007 and you can download the software from here;

http://www.ccrb.co.uk/vrdownloads.html

You can use your existing pin number with the new software and I have attached a picture of the cable that is now available to connect to your PC via the 7 pin I/O connector, the software also comes with the lead as shown.

Regards

Barrie Law · 28th May 2007, 10:13

Quote: (Originally Posted by robinzon)

Yeah well all I need then is the cable, which I certainly do not have and spending $259 on it just doe not sound like fun... though I saw cables separately somewhere. Besides can PINs be downloaded from soft 2.0CXR ?

thanks

Hi Robinzon,

The Cable kit should cost no more than about 110 USD RRP.

I do not know if the pins can be downloaded with version 2.0CXR but I will find out!!

Regards

Ivon · 28th May 2007, 10:26

Quote: (Originally Posted by Barrie Law)

Hi Robinzon,

The Prolog has been replaced by the new Prolink 2007 and you can download the software from here;

http://www.ccrb.co.uk/vrdownloads.html

You can use your existing pin number with the new software and I have attached a picture of the cable that is now available to connect to your PC via the 7 pin I/O connector, the software also comes with the lead as shown.

Regards

Barrie, the link doesn't seem to work for me?

Silent · 28th May 2007, 11:12

Quote: (Originally Posted by Ivon)

Barrie, the link doesn't seem to work for me?

Ivon,

Try it again, the CCRB website appeared to have a blip for a few minutes and go offline.

It seems to be back up now.

Ivon · 28th May 2007, 11:53

Quote: (Originally Posted by Silent)

Ivon,

Try it again, the CCRB website appeared to have a blip for a few minutes and go offline.

It seems to be back up now.

Still not working, I'll try again later.

Silent · 28th May 2007, 11:58

Quote: (Originally Posted by Ivon)

Still not working, I'll try again later.

Yeah looks like it's fallen over again....

robinzon · 28th May 2007, 13:27

Where did you get that quote? I saw the kit online for $259 at diveriteepxress and somewhere else though usually they are overpriced by about %30 at least (for example color upgrade is listed as $459 but is actually $318 at the LDS)... do tell where I can get it cheaper?!? def. let me know if thye can be downloaded from Computer software 2.0CXR... Delta is very slow with replies to their emails

Quote: (Originally Posted by Barrie Law)

Hi Robinzon,

The Cable kit should cost no more than about 110 USD RRP.

I do not know if the pins can be downloaded with version 2.0CXR but I will find out!!

Regards

Silent · 28th May 2007, 14:04

Quote: (Originally Posted by robinzon)

Where did you get that quote? I saw the kit online for $259 at diveriteepxress and somewhere else though usually they are overpriced by about %30 at least (for example color upgrade is listed as $459 but is actually $318 at the LDS)... do tell where I can get it cheaper?!? def. let me know if thye can be downloaded from Computer software 2.0CXR... Delta is very slow with replies to their emails

Barrie Law is a VR3 dealer, check his prices at Divertec Ltd

27th May 2007, 19:22	#1 (permalink)
robinzon New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Dec 2006 Location: NY Posts: 34	Anyone has ProLog software? Hey all, I was wondering if anyone has the ProLog software. I already have the PC Link PIN and ProDive but now in dire need to download PINS off of my computer and need ProLog (and a cable for that matter for which I am fervently looking now). If so let me know if you can send it. Alternativly if anyone is in New York area with the software/cable let me know (pref. Brooklyn/Manhattan). Thanks
(Offline)

28th May 2007, 10:01	#3 (permalink)
robinzon New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Dec 2006 Location: NY Posts: 34	Re: Anyone has ProLog software? Yeah well all I need then is the cable, which I certainly do not have and spending $259 on it just doe not sound like fun... though I saw cables separately somewhere. Besides can PINs be downloaded from soft 2.0CXR ? thanks Quote: (Originally Posted by Barrie Law) Hi Robinzon, The Prolog has been replaced by the new Prolink 2007 and you can download the software from here; http://www.ccrb.co.uk/vrdownloads.html You can use your existing pin number with the new software and I have attached a picture of the cable that is now available to connect to your PC via the 7 pin I/O connector, the software also comes with the lead as shown. Regards
(Offline)

28th May 2007, 10:13	#4 (permalink)
Barrie Law RebreatherWorld Sponsor Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Jun 2005 Location: Ireland Posts: 726	Re: Anyone has ProLog software? Quote: (Originally Posted by robinzon) Yeah well all I need then is the cable, which I certainly do not have and spending $259 on it just doe not sound like fun... though I saw cables separately somewhere. Besides can PINs be downloaded from soft 2.0CXR ? thanks Hi Robinzon, The Cable kit should cost no more than about 110 USD RRP. I do not know if the pins can be downloaded with version 2.0CXR but I will find out!! Regards __________________ Barrie Law Rebreather World Store Supplying the Rebreather World Tel:US +19548403892 Fax:US+19543333792 Tel:EU+442071930496 Fax:EU+442077606344 Mobile+353876880628 Skype:barrielaw Email: barrie@rebreatherworldstore.com
(Offline)

28th May 2007, 10:26	#5 (permalink)
Ivon Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2006 Location: Hull, East Yorkshire, England Posts: 318	Re: Anyone has ProLog software? Quote: (Originally Posted by Barrie Law) Hi Robinzon, The Prolog has been replaced by the new Prolink 2007 and you can download the software from here; http://www.ccrb.co.uk/vrdownloads.html You can use your existing pin number with the new software and I have attached a picture of the cable that is now available to connect to your PC via the 7 pin I/O connector, the software also comes with the lead as shown. Regards Barrie, the link doesn't seem to work for me?
(Offline)

28th May 2007, 11:12	#6 (permalink)
Silent Staying Silent! Mostly... Current Rebreather/s: Other CCR Other Rebreather/s: Megalodon Ouroboros Other CCR Join Date: Jun 2005 Location: Northants, UK Posts: 383	Re: Anyone has ProLog software? Quote: (Originally Posted by Ivon) Barrie, the link doesn't seem to work for me? Ivon, Try it again, the CCRB website appeared to have a blip for a few minutes and go offline. It seems to be back up now.
(Offline)

28th May 2007, 11:53	#7 (permalink)
Ivon Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Feb 2006 Location: Hull, East Yorkshire, England Posts: 318	Re: Anyone has ProLog software? Quote: (Originally Posted by Silent) Ivon, Try it again, the CCRB website appeared to have a blip for a few minutes and go offline. It seems to be back up now. Still not working, I'll try again later.
(Offline)

28th May 2007, 11:58	#8 (permalink)
Silent Staying Silent! Mostly... Current Rebreather/s: Other CCR Other Rebreather/s: Megalodon Ouroboros Other CCR Join Date: Jun 2005 Location: Northants, UK Posts: 383	Re: Anyone has ProLog software? Quote: (Originally Posted by Ivon) Still not working, I'll try again later. Yeah looks like it's fallen over again....
(Offline)

28th May 2007, 13:27	#9 (permalink)
robinzon New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Dec 2006 Location: NY Posts: 34	Re: Anyone has ProLog software? Where did you get that quote? I saw the kit online for $259 at diveriteepxress and somewhere else though usually they are overpriced by about %30 at least (for example color upgrade is listed as $459 but is actually $318 at the LDS)... do tell where I can get it cheaper?!? def. let me know if thye can be downloaded from Computer software 2.0CXR... Delta is very slow with replies to their emails Quote: (Originally Posted by Barrie Law) Hi Robinzon, The Cable kit should cost no more than about 110 USD RRP. I do not know if the pins can be downloaded with version 2.0CXR but I will find out!! Regards
(Offline)

28th May 2007, 14:04	#10 (permalink)
Silent Staying Silent! Mostly... Current Rebreather/s: Other CCR Other Rebreather/s: Megalodon Ouroboros Other CCR Join Date: Jun 2005 Location: Northants, UK Posts: 383	Re: Anyone has ProLog software? Quote: (Originally Posted by robinzon) Where did you get that quote? I saw the kit online for $259 at diveriteepxress and somewhere else though usually they are overpriced by about %30 at least (for example color upgrade is listed as $459 but is actually $318 at the LDS)... do tell where I can get it cheaper?!? def. let me know if thye can be downloaded from Computer software 2.0CXR... Delta is very slow with replies to their emails Barrie Law is a VR3 dealer, check his prices at Divertec Ltd
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode