It appears you have not yet registered with our community. To register for free click here
Rebreather World

Go Back   Rebreather World Rebreather Models, Design, and Accessories CCR - Closed Circuit Rebreathers Inspiration / Evolution Inspiration / Evolution Rebreathers

Thread Tools Display Modes
Old 25th May 2009, 11:09   #1
RBW Member
atomik's Avatar

Hammerhead / Mccr homemade
Classic, Voyager, NT1 pscr, HH
Join Date: Aug 2006
Location: ITALY
Posts: 157
atomik is an unknown quantity at this point
problems reading voltage Inspo Classic

I dive from january09 with a used 2003 InspirationClassic, coax re-cabled last year from APD, all perfect for 50h. From one week, using Fujtzu, Varta or other type of battery, at first dive with new battery I don't have problem, at second dive the slave started like master give NODIVE, if I start it like slave it go but in water if switch off the primary, the slave reset and show LOWBATTERY NODIVE.

Same battery on Primary doesn't have problems. It' s like under 6.2/3 volt the slave doesn't read correct voltage. Anyone has same problem?
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT. The time now is 14:20.

RebreatherWorld.Com 2005 - 2013
Rebreather World, RBW and the Rebreather World Logo are Trademarks
All rights reserved, no republishing of content without written permission.
By using this website you have agreed to our Terms & Conditions of Use

free counters