+ Reply to Thread
Results 1 to 10 of 21

Thread: How I dry my lungs out

Hybrid View

  1. #1
    RBW Member monkfe is an unknown quantity at this point monkfe's Avatar
    Join Date
    Feb 2014
    Location
    Toms River NJ
    Posts
    9

    How I dry my lungs out

    How I dry my lungs out....I've been meaning to share this for a while now and finally have the time to post some pics of my lung dryer. I purchased this all on ebay. My initial fabrication of this used a much smaller fan that wasn't very powerful and really didn't do the job, this one literally "puffs" the lung up and provides great air flow. You should still try and remove as much water as possible before using as even after several hours you can still have water in it if you don't. I used a 1.5 in DWV coupling, not sure what you guys in Europe use for plumbing, but I'm sure you can find a similar item or ebay. Next and most importantly obtain a Narked@90 inspo large and small drying bungs. Carefully after marking out your fan screw holes, dremel out four long relief slots to slide the fan into the coupling. Use a hot glue gun to melt hot glue to hold in place as pictured. On the other end, take off a small amount of material to allow a tight fit with the drying bung, I removed the screen for more airflow. Purchased a power supply( i used a 3A). Also order a connector that you can solder to the fan and thus you can disconnect it from the power supply when you need to. The fan model # is MMB Turbo Fan 1611FT-D4W-B86 12V 1.2A 4 Wire 40MM , about 15.00 usd. I used the smaller bung for the BOV loop which I hang vertically with the fan at the top, and the larger bung at the "T" piece. I use a blank bung to block off the other side of the "T" piece when drying the lungs. I still have to remove the lungs from the kit and lie them flat and remove the supply line to allow air to escape.
    Attached Images

  2. #2
    Cognitive surrender TopLeft is an unknown quantity at this point TopLeft's Avatar
    Join Date
    Oct 2009
    Location
    Columbus, Ohio
    Posts
    458
    Evolution+

    Evolution

    Re: How I dry my lungs out

    Clever, I like it! Thanks for sharing the information.

  3. #3
    RBW Member broncobowsher is on a distinguished road broncobowsher is on a distinguished road broncobowsher's Avatar
    Join Date
    Jul 2012
    Location
    Arizona
    Posts
    255
    TBD

    Re: How I dry my lungs out

    Other then a couple long sticks of PVC that is the same as I use on the drysuit as well. Amazing how well a little bit of airflow over a long time will dry stuff out.

  4. #4
    RBW Member dreamdive has disabled reputation dreamdive's Avatar
    Join Date
    May 2007
    Location
    Delray Beach, FL
    Posts
    1,298
    Pathfinder, rEvo, Explorer

    Meg, PrismII, Titan, Optima, 7

    Re: How I dry my lungs out

    If any one has ever looked at boot driers, they don't produce a lot of air flow either. But it is heated air and carries moisture away.

    I really think there is a demand for loop hose and lung driers. Any entrepreneurs our there?

    Thanks for sharing!

  5. #5
    RBW Member jukkao is on a distinguished road jukkao is on a distinguished road jukkao's Avatar
    Join Date
    Apr 2005
    Location
    Finland
    Posts
    116

    Re: How I dry my lungs out

    What kind of problems have happened without drying?
    Jukka

  6. #6
    RBW Member jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner is a glorious beacon of light jturner's Avatar
    Join Date
    Mar 2011
    Location
    East Midlands, UK
    Posts
    140
    APD Evolution

    Re: How I dry my lungs out

    Quote Originally Posted by jukkao  View Original Post
    What kind of problems have happened without drying?
    Jukka
    The potential to grow some nice moss or mold, or some other delightful things in your counterlungs, which can then be transferred to your actual lungs! When you sanitise the lungs after use (each time they're used of course!), you don't sterilise them and even if you had somehow killed absolutely anything that could live within the water used to flush them out or on the materials themselves, you then leave them open to the air, and all the bugs that contains. If they were dry, it is much less likely to allow anything to grow. If they're wet...

  7. #7
    RBW Member dreamdive has disabled reputation dreamdive's Avatar
    Join Date
    May 2007
    Location
    Delray Beach, FL
    Posts
    1,298
    Pathfinder, rEvo, Explorer

    Meg, PrismII, Titan, Optima, 7

    Re: How I dry my lungs out

    Quote Originally Posted by jukkao  View Original Post
    What kind of problems have happened without drying?
    Jukka


    Since you missed this article posted prior:


    https://www.bbc.com/news/health-37152871

  8. #8
    RBW Member NickB has a spectacular aura about NickB has a spectacular aura about NickB has a spectacular aura about NickB has a spectacular aura about NickB has a spectacular aura about NickB has a spectacular aura about NickB's Avatar
    Join Date
    May 2006
    Location
    Cardiff, Wales, UK
    Posts
    65
    JJ-CCR

    Re: How I dry my lungs out

    Quote Originally Posted by jukkao  View Original Post
    What kind of problems have happened without drying?
    Jukka
    None for me, in 9 years of CCR diving.

    My JJ sits on the deck of the boat for most of the year with just the occasional rinse with fresh water. I maybe rinse once or twice each year with Virkon or such but it's rare.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts