+ Reply to Thread
Results 1 to 5 of 5

Thread: Narked@90 4 Cell holder for AP Diving Evo+

  1. #1
    RBW Member gzaccaria is an unknown quantity at this point gzaccaria's Avatar
    Join Date
    Aug 2017
    Location
    GENEVA
    Posts
    11
    AP Diving Evo +

    Narked@90 4 Cell holder for AP Diving Evo+

    Hi all,
    I would like to install in the lid of my APD Evo+ (2017 version) a Narked@90 4 cell holder.
    a) is this cell holder compatible with the APD CO2 sensor?
    b) is it a good idea to connect it to a NERD2 through a Fisher connection
    c) any feedback/advice
    Thanks

  2. #2
    RBW Member moose_grunt is an unknown quantity at this point moose_grunt's Avatar
    Join Date
    Dec 2009
    Location
    Saipan
    Posts
    213

    Re: Narked@90 4 Cell holder for AP Diving Evo+

    There is not enough room for a fourth cell in the holder with the co2 sensor. It's possible to just stuff a loose cell in there, but not in the cell holder itself. If you're on Facebook, search the APD Rebreather Divers group, because I asked the same question and got answers with pictures.

    If you're just using it to share 4th the cells with an external computer, no problem.

    Jim

    Sent from my SM-G950F using Tapatalk

  3. #3
    RBW Member moose_grunt is an unknown quantity at this point moose_grunt's Avatar
    Join Date
    Dec 2009
    Location
    Saipan
    Posts
    213

    Re: Narked@90 4 Cell holder for AP Diving Evo+

    Found it: https://facebook.com/groups/63255721...07527292628980

    Sent from my SM-G950F using Tapatalk

  4. #4
    RBW Member gzaccaria is an unknown quantity at this point gzaccaria's Avatar
    Join Date
    Aug 2017
    Location
    GENEVA
    Posts
    11
    AP Diving Evo +

    Re: Narked@90 4 Cell holder for AP Diving Evo+

    Thanks Jim,

    To sum up, you have 2 solutions
    a) Cut the mixing chamber cover in order to have the sensor protrude toward the scrubber (risky?)
    b) HAving the 4th cell loose as it seems that there is engh space...

    Have you tried ?
    Quote Originally Posted by moose_grunt  View Original Post
    Found it: https://facebook.com/groups/63255721...07527292628980

    Sent from my SM-G950F using Tapatalk

  5. #5
    RBW Member moose_grunt is an unknown quantity at this point moose_grunt's Avatar
    Join Date
    Dec 2009
    Location
    Saipan
    Posts
    213

    Re: Narked@90 4 Cell holder for AP Diving Evo+

    Quote Originally Posted by gzaccaria  View Original Post
    a) Cut the mixing chamber cover in order to have the sensor protrude toward the scrubber (risky?)
    I don't think he cut it, he just flipped the mount and put the co2 sensor in from the other side.

    I never tried either, as I wasn't particularly interested in a 4th cell, and had a vr3 with a different Fischer connection from the cable I had. If I end up fi di g a good deal on a predator or petrel (or make my own ppo2 display), then I'll try again, but this time splitting the three cells rather than adding in a fourth.

    Jim

    Sent from my SM-G950F using Tapatalk

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts