+ Reply to Thread
Results 1 to 2 of 2

Thread: Aka-60

  1. #1
    RBW Member apest2many is an unknown quantity at this point apest2many's Avatar
    Join Date
    Dec 2007



    Aka-60 unit number 35. Slowly getting close to test time. Opened lung and checked connections. All were string and tape. Replaced with cobra flat head cable ties two per fitting. Ditched the loop hoses and dsv for standard kit. Three cell p port in the lung for sensors three LCD monitor. Removed the original spg elbow and disconnected the bulk head on the brass hp line. Rerouted it internally and hooked it to a 200 bar din female so I can sit a ds4 inside the rig next to the original plumbing. Run spg, wing and a second stage from there. Removed original harness and bolted on a nomad.
    Attached Images

  2. #2
    RBW Member Scubzy is an unknown quantity at this point Scubzy's Avatar
    Join Date
    Aug 2018
    United States

    Re: Aka-60

    any updates on this? have you tested it?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts