+ Reply to Thread
Results 1 to 6 of 6

Thread: Can you fit a HOLLIS BOV to a JJ unit

  1. #1
    RBW Member DIVERAFF is an unknown quantity at this point DIVERAFF's Avatar
    Join Date
    Jul 2016
    Location
    KENT
    Posts
    2
    PRISM 2

    Can you fit a HOLLIS BOV to a JJ unit

    Trying to find out if you can fit a HOLLIS BOV to a JJ unit, if so do I need any extra parts to fit it.

    Thanks

    Andy

  2. #2
    RBW Member moose_grunt is an unknown quantity at this point moose_grunt's Avatar
    Join Date
    Dec 2009
    Location
    Saipan
    Posts
    228

    Re: Can you fit a HOLLIS BOV to a JJ unit

    I'm pretty sure I read somewhere here or on the other forum that they were using it, and that's what inspired me to put on on my Inspo. You might be able to backtrack it through my participated threads, it maybe Baz will stop by in comment. I'll see if I can find it on my computer after work.

    Jim

  3. #3
    New Member Bazza has a spectacular aura about Bazza has a spectacular aura about Bazza has a spectacular aura about Bazza has a spectacular aura about Bazza has a spectacular aura about Bazza's Avatar
    Join Date
    Feb 2005
    Location
    Australia
    Posts
    487
    Inspo Classic, JJ-CCR

    Mk15.5, rEvo, Vision, Kiss,

    Re: Can you fit a HOLLIS BOV to a JJ unit

    Sure can .... we do it all the time.

    LP hose from the right use a Explorer BOV
    1 X BOV assy Explorer HL9054

    2 X Adapter Hose outlet mouthpiece HL7768

    1 X HUD Bracket BOV Shearwater HL8365 or HUD Bracket assy Prism 2 HL9237

    LP hose from the Left use a Prism 2 BOV or change the flow

    1 X Prism 2 part number #25363 - Poppet chamber

    2 X Explorer part #25399 - NUT, HOSE

    Or buy a Prism 2 BOV upgrade kit
    1 X Hollis Prism 2 BOV upgrade kit HL240.6300
    1 X Adapter Hose outlet mouthpiece HL7768
    regards Baz

  4. #4
    RBW Member mick4707 is an unknown quantity at this point mick4707's Avatar
    Join Date
    Nov 2011
    Location
    Australia
    Posts
    60
    JJ-CCR

    Re: Can you fit a HOLLIS BOV to a JJ unit

    I have one on my JJ, fantastic BOV. You need a few extra bits from Hollis from memory it is an extra hose adapter and the HUD holder (which is a POS)

  5. #5
    RBW Member moose_grunt is an unknown quantity at this point moose_grunt's Avatar
    Join Date
    Dec 2009
    Location
    Saipan
    Posts
    228

    Re: Can you fit a HOLLIS BOV to a JJ unit

    Figured Baz would beat me to the punch.

    If it's any help, I've got all the parts, numbers, and pictures from fitting one to my Inspo in this thread http://www.rebreatherworld.com/showt...l=1#post469833

    Good luck. I'm lucky to have found a way to put a quality BOV on my unit without spending nearly 3x as much for the MFG's part.

    Jim

  6. #6
    RBW Member DIVERAFF is an unknown quantity at this point DIVERAFF's Avatar
    Join Date
    Jul 2016
    Location
    KENT
    Posts
    2
    PRISM 2

    Re: Can you fit a HOLLIS BOV to a JJ unit

    Thanks guys

    I knew you'd be able to help me.

    Raff

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts