+ Reply to Thread
Results 1 to 3 of 3

Thread: Exciting new CCR in the USA!

  1. #1
    RBW Member Dive Addicts is an unknown quantity at this point Dive Addicts's Avatar
    Join Date
    Jul 2013
    Location
    Draper, UT
    Posts
    14
    HH Evo+ Sentinel Prism2 Optima

    Exciting new CCR in the USA!

    Dive Addicts is proud to announce that we are helping the SF2 ECCR make a splash here in the USA. We already have a couple units on their way and will be offering training through TDI. Call +1 801-572-5111 or EMAIL US for more information.

    Available in both backmount and sidemount configurations.




    Keep it simple! This was the philosophy for the development of the 1st SF2 which seems to have been achieved. In comparison to other units the SF2 is straight forward, compact and stream lined. Looking closely at the rebreather one can see the counter lung is integrated into a carbon fibre body of the rebreather. This idea came from its predecessor the pSCR SF1.

    Currently most rebreathers position the counter lung over the shoulder and on to the chest. This makes the transition from OC to CCR configuration difficult. Stages must be positioned differently, often they sit too low, so trim and stream lining are affected. The positioning of various accessories, such as back up lights must be re-rigged to allow for the position of the counter lungs.

    With the new positioning of the counter lung on the bottom of the rebreather incorporating the over pressure valve the removal of water is very simple. The centre section of the SF2 contains the following devices,

    Manual add bypass if fitted feeds small volumes of gas either diluent or oxygen into the unit which means the diver can manually dive the system.

    The ADV valve is sited on the right hand side, this being activated by the counter lung when depleted of gas.

    Above the centre section is housed the 2.2 kg CO2 scrubber which in turn is surrounded by the carbon fibre tube. Tools are not necessary to assemble or disassemble the SF2, in fact most fittings can be opened and closed by hand. On the top the head of the SF2 you will find 3 oxygen sensors, solenoid valve and battery box. With this positioning very little condensation after a dive is noted near or on the components. You will also note the breathing hoses are connected at a slight angle allowing for a more straight forward and comfortable fit for the diver.

    The outer structure of the SF2 being made from carbon fibre is strong and light weight as the various components are fitted in a long tube the attachment of cylinders is straight forward allowing 3 litre to whatever size is appropriate for the dive. The SF2 is aimed at the advanced sports diver or trimix technical diver and having incorporated the counter lungs in the carbon fibre tube makes it clutter free in the chest area. The manual adds are located on the waist band with the ability to connect off board gas again removing clutter from the chest area.

  2. #2
    RBW Member Franck13 is an unknown quantity at this point Franck13's Avatar
    Join Date
    Oct 2010
    Location
    Marseille
    Posts
    202
    Vision Inspiration all options

    kiss poseidon lard ....

    Talking Re: Exciting new CCR in the USA!

    Congratulations for your SF2



    Franck


    Quote Originally Posted by Dive Addicts  View Original Post
    Dive Addicts is proud to announce that we are helping the SF2 ECCR make a splash here in the USA. We already have a couple units on their way and will be offering training through TDI. Call +1 801-572-5111 or EMAIL US for more information.

    Available in both backmount and sidemount configurations.




    Keep it simple! This was the philosophy for the development of the 1st SF2 which seems to have been achieved. In comparison to other units the SF2 is straight forward, compact and stream lined. Looking closely at the rebreather one can see the counter lung is integrated into a carbon fibre body of the rebreather. This idea came from its predecessor the pSCR SF1.

    Currently most rebreathers position the counter lung over the shoulder and on to the chest. This makes the transition from OC to CCR configuration difficult. Stages must be positioned differently, often they sit too low, so trim and stream lining are affected. The positioning of various accessories, such as back up lights must be re-rigged to allow for the position of the counter lungs.

    With the new positioning of the counter lung on the bottom of the rebreather incorporating the over pressure valve the removal of water is very simple. The centre section of the SF2 contains the following devices,

    Manual add bypass if fitted feeds small volumes of gas either diluent or oxygen into the unit which means the diver can manually dive the system.

    The ADV valve is sited on the right hand side, this being activated by the counter lung when depleted of gas.

    Above the centre section is housed the 2.2 kg CO2 scrubber which in turn is surrounded by the carbon fibre tube. Tools are not necessary to assemble or disassemble the SF2, in fact most fittings can be opened and closed by hand. On the top the head of the SF2 you will find 3 oxygen sensors, solenoid valve and battery box. With this positioning very little condensation after a dive is noted near or on the components. You will also note the breathing hoses are connected at a slight angle allowing for a more straight forward and comfortable fit for the diver.

    The outer structure of the SF2 being made from carbon fibre is strong and light weight as the various components are fitted in a long tube the attachment of cylinders is straight forward allowing 3 litre to whatever size is appropriate for the dive. The SF2 is aimed at the advanced sports diver or trimix technical diver and having incorporated the counter lungs in the carbon fibre tube makes it clutter free in the chest area. The manual adds are located on the waist band with the ability to connect off board gas again removing clutter from the chest area.

  3. #3
    RBW Member Dive Addicts is an unknown quantity at this point Dive Addicts's Avatar
    Join Date
    Jul 2013
    Location
    Draper, UT
    Posts
    14
    HH Evo+ Sentinel Prism2 Optima

    Re: Exciting new CCR in the USA!

    Quote Originally Posted by Franck13  View Original Post
    Congratulations for your SF2



    Franck
    Thanks! We are really enjoying them...

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts