+ Reply to Thread
Results 1 to 3 of 3

Thread: Easy way to open a Ray canister ?

  1. #1
    RBW Member venturi is an unknown quantity at this point venturi's Avatar
    Join Date
    Sep 2006
    Location
    france
    Posts
    97
    Submatix SMS

    atlantis rgu-fm Ray

    Easy way to open a Ray canister ?

    Hi all,

    is there an easy way to open a ray canister, as o-rings are very stiff ? I have to use a small screwdriver to draw aside the cover from the cylinder

  2. #2
    LAR Addict RGMag is a jewel in the rough RGMag is a jewel in the rough RGMag is a jewel in the rough RGMag is a jewel in the rough RGMag is a jewel in the rough RGMag is a jewel in the rough RGMag is a jewel in the rough RGMag's Avatar
    Join Date
    Sep 2008
    Location
    Germany
    Posts
    721
    LAR VI FGT LAR VI Clone

    OMG MK4 CDV and MK4 CSC

    Re: Easy way to open a Ray canister ?

    use some silicone grease on them, no problem getting them off by hand with this. Screwdriver is not very good for this, you can ruin the seal surface very easy with that.

    Greetings, Magnus

  3. #3
    RBW Member venturi is an unknown quantity at this point venturi's Avatar
    Join Date
    Sep 2006
    Location
    france
    Posts
    97
    Submatix SMS

    atlantis rgu-fm Ray

    Re: Easy way to open a Ray canister ?

    OK. As the manual only tells to grease a few parts of the rig, the canister did'nt enter y plans. I'll molykote it, so.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts