+ Reply to Thread
Results 1 to 4 of 4

Thread: Vr2 R22 / Kd1

  1. #1
    New Member jondive is an unknown quantity at this point jondive's Avatar
    Join Date
    Aug 2005
    Location
    Diss Norfolk Engalnd
    Posts
    37

    Vr2 R22 / Kd1

    I have a VR2 and a spare P/Con which I had considered cutting into the C/Lung of my S/Kiss. However, has anyone removed one of the triple displays and linked to one of the KD1's and found it successful, if so anything to be carful of. (I note the normal sensor for the VR2 is an R22).

  2. #2
    New Member seippel is an unknown quantity at this point seippel's Avatar
    Join Date
    Aug 2005
    Location
    Sweden
    Posts
    7

    Re: Vr2 R22 / Kd1

    Hi,

    I have not done it on a SK but I know that Jetsam has done it. The K1D and the VR2 will work together. There has been som discussions on the KISS forum about this also I think.

    One thing to thing about is of course the plastic cable gland. As it has been used and contracted for a amount of time I would change it against a barnd new one to insure that it will seal 100%.

    Regards,

    Peder

  3. #3
    Sebastian Chander Deep Smeg is a jewel in the rough Deep Smeg is a jewel in the rough Deep Smeg is a jewel in the rough Deep Smeg is a jewel in the rough Deep Smeg is a jewel in the rough Deep Smeg is a jewel in the rough Deep Smeg is a jewel in the rough Deep Smeg's Avatar
    Join Date
    Feb 2005
    Location
    Leeds, England
    Posts
    505
    Deep Smeg

    Megalodon

    Re: Vr2 R22 / Kd1

    When Jetsam were here in Aprial they had one of there SK's running with a VR 3 on one of the KD-1's.

    I think they have the hardware for it, available.

    Cheers

    Seb

  4. #4
    RBW Member decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie has a reputation beyond repute decoweenie's Avatar
    Join Date
    Feb 2005
    Location
    Dubai
    Posts
    5,516

    Re: Vr2 R22 / Kd1

    You could "sacrifice" one of the 3 PO2 displays on your SK for a cable plug into the VR2-3 computer.

    AFAIK, both Kim and Gordon are using that option on their units.

    Having used integrated sensor feed into VR-3, I wouldn't do it again. There is no benefit to be had unless you can't keep the correct set-point on your unit -- which is a completely different issue.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts