Hose weight for Dräger Ray.

BullHead · 6th August 2006, 18:51

For some years ago i found a guy who made some really nice hose weights for the Dräger Ray.
He sold them in a kit (4 weights) for 40-50 euro or something like that.
I think he was in Belgium... or at least in Europe.
I don't remeber

Does anyone know anything about this guy?
I would like to buy a kit from him.

RonMicjan · 6th August 2006, 19:48

patrick at oxycheq has hose weights, individual SS rings that you can spread out on the hose. they fit on the kiss hoses, but have not tried them on the draeger hoses.

Stephane · 6th August 2006, 21:27

Quote: (Originally Posted by BullHead)

For some years ago i found a guy who made some really nice hose weights for the Dräger Ray.
He sold them in a kit (4 weights) for 40-50 euro or something like that.
I think he was in Belgium... or at least in Europe.
I don't remeber

Does anyone know anything about this guy?
I would like to buy a kit from him.

Hello,

I think this guy is named Paul Raymaekers and you can contact him here on the board under the name paulraymaekers.

But you can call hime Mister rEvo.

paulraymaekers · 6th August 2006, 21:34

Quote: (Originally Posted by BullHead)

For some years ago i found a guy who made some really nice hose weights for the Dräger Ray.
He sold them in a kit (4 weights) for 40-50 euro or something like that.
I think he was in Belgium... or at least in Europe.
I don't remeber

Does anyone know anything about this guy?
I would like to buy a kit from him.

we use them on the rEvo: SS weights that you can fix without removing the hoses
pm me at paul@raytech.be

pictures:
http://www.rebreatherworld.com/photo...500&ppuser=397

regards
paul

Allan_o · 6th August 2006, 23:13

Hi.
For your info: normal galvanized plumping pipes in the size 0,75 inch will fit perfectly, if you buy the one that is pre threaded, you can cut of in size you need.
A perfect solution for the cost of 100 dkkr = 15$..

Regards. Allan

paulraymaekers · 7th August 2006, 08:22

Quote: (Originally Posted by Allan_o)

Hi.
For your info: normal galvanized plumping pipes in the size 0,75 inch will fit perfectly, if you buy the one that is pre threaded, you can cut of in size you need.
A perfect solution for the cost of 100 dkkr = 15$..

Regards. Allan

I don't think this is a correct solution: once you start cutting the tube, the cutted sides are mild steel, will start rusting (??) corroding immediately, giving brown .... :-)
regards
paul

BullHead · 7th August 2006, 18:00

Quote: (Originally Posted by paulraymaekers)

we use them on the rEvo: SS weights that you can fix without removing the hoses
pm me at paul@raytech.be

pictures:
http://www.rebreatherworld.com/photo...500&ppuser=397

regards
paul

This is exactly what is was looking for

pm is sent

RonMicjan · 8th August 2006, 06:06

FYI, I checked the Oxycheq weights and they fit the draeger hose perfect.

paulraymaekers · 8th August 2006, 08:13

for the Ray, you need +/- 500 gram that you can shift over the hose, to get the trim you want: you do this during diving: with some small force you can move the weights to or away from the DSV, but they will never move unwanted.

regards
paul

henckell · 9th August 2006, 09:57

Jonas,

your local Oxycheq dealer in Sweden, REKODEKO, can supply you with these hose weights as well as other Rebreather-related products.

Send an email to: fredrik@rekodeko.se

Regards,
Henrik

6th August 2006, 18:51	#1 (permalink)
BullHead New Member Current Rebreather/s: Ray Other Rebreather/s: Ray Join Date: Mar 2005 Location: Oxelösund - Sweden Posts: 45	Hose weight for Dräger Ray. For some years ago i found a guy who made some really nice hose weights for the Dräger Ray. He sold them in a kit (4 weights) for 40-50 euro or something like that. I think he was in Belgium... or at least in Europe. I don't remeber Does anyone know anything about this guy? I would like to buy a kit from him. __________________ / Jonas Sometimes you can't make it on your own...
(Offline)

6th August 2006, 19:48	#2 (permalink)
RonMicjan Cap Ron scourge of the NW Current Rebreather/s: Megalodon Dolphin Home Build Other Rebreather/s: Sport Kiss Classic Kiss Dolphin Home Build Join Date: Feb 2005 Location: Cape Disapointment, The Graveyard of the Pacific Posts: 1,112	Re: Hose weight for Dräger Ray. patrick at oxycheq has hose weights, individual SS rings that you can spread out on the hose. they fit on the kiss hoses, but have not tried them on the draeger hoses. __________________ Marine rescue, towing and salvage. Interfering with natural selection since 1983. www.tmishop.com Diving bits etc. www.seatowpdx.com The Summer Job
(Offline)

6th August 2006, 21:27	#3 (permalink)
Stephane Stéphane Acounis Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Nantes - France Posts: 785	Re: Hose weight for Dräger Ray. Quote: (Originally Posted by BullHead) For some years ago i found a guy who made some really nice hose weights for the Dräger Ray. He sold them in a kit (4 weights) for 40-50 euro or something like that. I think he was in Belgium... or at least in Europe. I don't remeber Does anyone know anything about this guy? I would like to buy a kit from him. Hello, I think this guy is named Paul Raymaekers and you can contact him here on the board under the name paulraymaekers. But you can call hime Mister rEvo. __________________ Stéphane
(Online)

6th August 2006, 21:34	#4 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,578	Re: Hose weight for Dräger Ray. Quote: (Originally Posted by BullHead) For some years ago i found a guy who made some really nice hose weights for the Dräger Ray. He sold them in a kit (4 weights) for 40-50 euro or something like that. I think he was in Belgium... or at least in Europe. I don't remeber Does anyone know anything about this guy? I would like to buy a kit from him. we use them on the rEvo: SS weights that you can fix without removing the hoses pm me at paul@raytech.be pictures: http://www.rebreatherworld.com/photo...500&ppuser=397 regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Online)

6th August 2006, 23:13	#5 (permalink)
Allan_o New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Dec 2005 Location: Copenhagen Denmark Posts: 81	Re: Hose weight for Dräger Ray. Hi. For your info: normal galvanized plumping pipes in the size 0,75 inch will fit perfectly, if you buy the one that is pre threaded, you can cut of in size you need. A perfect solution for the cost of 100 dkkr = 15$.. Regards. Allan
(Offline)

7th August 2006, 08:22	#6 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,578	Re: Hose weight for Dräger Ray. Quote: (Originally Posted by Allan_o) Hi. For your info: normal galvanized plumping pipes in the size 0,75 inch will fit perfectly, if you buy the one that is pre threaded, you can cut of in size you need. A perfect solution for the cost of 100 dkkr = 15$.. Regards. Allan I don't think this is a correct solution: once you start cutting the tube, the cutted sides are mild steel, will start rusting (??) corroding immediately, giving brown .... :-) regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Online)

7th August 2006, 18:00	#7 (permalink)
BullHead New Member Current Rebreather/s: Ray Other Rebreather/s: Ray Join Date: Mar 2005 Location: Oxelösund - Sweden Posts: 45	Re: Hose weight for Dräger Ray. Quote: (Originally Posted by paulraymaekers) we use them on the rEvo: SS weights that you can fix without removing the hoses pm me at paul@raytech.be pictures: http://www.rebreatherworld.com/photo...500&ppuser=397 regards paul This is exactly what is was looking for pm is sent __________________ / Jonas Sometimes you can't make it on your own...
(Offline)

8th August 2006, 06:06	#8 (permalink)
RonMicjan Cap Ron scourge of the NW Current Rebreather/s: Megalodon Dolphin Home Build Other Rebreather/s: Sport Kiss Classic Kiss Dolphin Home Build Join Date: Feb 2005 Location: Cape Disapointment, The Graveyard of the Pacific Posts: 1,112	Re: Hose weight for Dräger Ray. FYI, I checked the Oxycheq weights and they fit the draeger hose perfect. __________________ Marine rescue, towing and salvage. Interfering with natural selection since 1983. www.tmishop.com Diving bits etc. www.seatowpdx.com The Summer Job
(Offline)

8th August 2006, 08:13	#9 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,578	Re: Hose weight for Dräger Ray. for the Ray, you need +/- 500 gram that you can shift over the hose, to get the trim you want: you do this during diving: with some small force you can move the weights to or away from the DSV, but they will never move unwanted. regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Online)

9th August 2006, 09:57	#10 (permalink)
henckell New Member Current Rebreather/s: Megalodon Classic Kiss Other Rebreather/s: Join Date: Aug 2005 Location: Sweden Posts: 90	Re: Hose weight for Dräger Ray. Jonas, your local Oxycheq dealer in Sweden, REKODEKO, can supply you with these hose weights as well as other Rebreather-related products. Send an email to: fredrik@rekodeko.se Regards, Henrik
(Online)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode