SeaCure

zbskii · 13th September 2006, 07:49

I've heard (but not tried myself) you need a #2 for a kiss dsv, and you need to use silicone glue to get a watertight seal.

grandizer52 · 13th September 2006, 07:51

I got the high flow on my dolphin, been diving with a standard seacure on scuba. the stock mouth piece on dolphin sucked. keep the info coming so i can pass it on
laytah
steve

dantheman · 13th September 2006, 12:33

Quote: (Originally Posted by zbskii)

I've heard (but not tried myself) you need a #2 for a kiss dsv, and you need to use silicone glue to get a watertight seal.

Re: use with KISS

I've had good luck with mine. I appreciate it's stiffness and would only amplify earlier comments
about mounting to include making sure the zip-tie is not one of the softer types.

You can generate greater torque with the seacure

--dan

obakesan82 · 14th September 2006, 13:05

Quote: (Originally Posted by dantheman)

Re: use with KISS

I've had good luck with mine. I appreciate it's stiffness and would only amplify earlier comments
about mounting to include making sure the zip-tie is not one of the softer types.

You can generate greater torque with the seacure

--dan

Suppposedly the Seacure Pro is a bit thicker and will work without splitting as a result. It is supposedly still a tight fit. I don't have first hand experience doing this but the guy who originally did my Dolphin training had the pro version mounted.

Ed

Zbi · 5th December 2007, 04:53

Quote:

diverklondike
I put the new highflow on my Golem BOV and am very happy with the results. I have had no leaking and it has reduced my jaw fatigue significantly.

Dive Safe
Mark

Hello Mark,

I also use the Golem BOV on my Inspo. I am looking to replace the mouthpiece, as on long dives I get a jaw fatigue. I also previously used the SeaCure in OC and was always very happy with it. Can you tell me which size of the new highflow is needed for the Golem? Thanks.

Rgds, André

dlh · 5th December 2007, 05:44

I recently started diving a Sport Kiss and had a lot of jaw fatigue due to the relatively heavy DSV. I picked up a SeaCure about 6 dives ago and had an immediate improvement! No more sore jaw muscles at all.

I was advised to wrap a few layers of electrical tape or silicone glue around the mounting point before attaching the SeaCure, and this worked well. I used about 3 loops to tape and have not had any leakage to speak of.

Dave

SkinAndScuba · 5th December 2007, 05:49

Quote: (Originally Posted by Zbi)

Hello Mark,

I also use the Golem BOV on my Inspo. I am looking to replace the mouthpiece, as on long dives I get a jaw fatigue. I also previously used the SeaCure in OC and was always very happy with it. Can you tell me which size of the new highflow is needed for the Golem? Thanks.

Rgds, André

According to Jakub you require a number III seacure for the Golem BOV. I've just got my Seacure, but have still to fit it.

Used to use the Seacure for OC and I have to agree it helped a lot on longer dives. I just found them tricky to get molded so that it did not hurt my jaw. once I moulded it so that it never touched the gum at all it was great. Can't wait to try the new one on the CCR.

grandizer52 · 5th December 2007, 06:07

@ present, I have it on the Sport Kiss as well used the SEACURE II, just like on the Dolphin, I had to heat up the DSV side first to get it on, and it was tighter than a strippers wallet, never leaked, got one on the wifes OC reg...it's a BISM from japan. that was wierd
laytah
steve

duffmiver · 5th December 2007, 06:37

which size fits the sport kiss???

Marvintpa · 5th December 2007, 13:03

I've tried two SeaCure's on the RB80 just to make sure it wasn't a molding issue (ie. my fault). The seal is excellent, no leaks, but the gum abuse is considerable and I had to scrap 'em.

13th September 2006, 07:49	#11 (permalink)
zbskii I have a diving problem. Current Rebreather/s: Sport Kiss Other Rebreather/s: Join Date: Dec 2005 Location: Portland, OR Posts: 137	Re: SeaCure I've heard (but not tried myself) you need a #2 for a kiss dsv, and you need to use silicone glue to get a watertight seal.
(Offline)

13th September 2006, 07:51	#12 (permalink)
grandizer52 Sport Kiss & Shearwater Current Rebreather/s: Sport Kiss Other CCR Home Build Other Rebreather/s: Not Bought Yet Sport Kiss Classic Kiss MK 15.X Other CCR Home Build Join Date: May 2006 Location: pearl city hawaii EARTH moving to Iscandar Posts: 254	Re: SeaCure I got the high flow on my dolphin, been diving with a standard seacure on scuba. the stock mouth piece on dolphin sucked. keep the info coming so i can pass it on laytah steve
(Offline)

13th September 2006, 12:33	#13 (permalink)
dantheman Emoticonoclast Current Rebreather/s: Sport Kiss rEvo Other Rebreather/s: Classic Kiss rEvo Join Date: May 2005 Location: NorthEast USA Posts: 394	Re: SeaCure Quote: (Originally Posted by zbskii) I've heard (but not tried myself) you need a #2 for a kiss dsv, and you need to use silicone glue to get a watertight seal. Re: use with KISS I've had good luck with mine. I appreciate it's stiffness and would only amplify earlier comments about mounting to include making sure the zip-tie is not one of the softer types. You can generate greater torque with the seacure --dan
(Online)

14th September 2006, 13:05	#14 (permalink)
obakesan82 New Member Current Rebreather/s: Classic Kiss rEvo Other CCR Dolphin Other Rebreather/s: Sport Kiss Classic Kiss rEvo Other CCR Dolphin Join Date: Nov 2005 Location: North Carolina Posts: 92	Re: SeaCure Quote: (Originally Posted by dantheman) Re: use with KISS I've had good luck with mine. I appreciate it's stiffness and would only amplify earlier comments about mounting to include making sure the zip-tie is not one of the softer types. You can generate greater torque with the seacure --dan Suppposedly the Seacure Pro is a bit thicker and will work without splitting as a result. It is supposedly still a tight fit. I don't have first hand experience doing this but the guy who originally did my Dolphin training had the pro version mounted. Ed __________________ "Igitur qui desiderat pacem, praeparet bellum."
(Offline)

5th December 2007, 04:53	#15 (permalink)
Zbi New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Join Date: Nov 2006 Location: Abu Dhabi Posts: 1	Re: SeaCure Quote: diverklondike I put the new highflow on my Golem BOV and am very happy with the results. I have had no leaking and it has reduced my jaw fatigue significantly. Dive Safe Mark Hello Mark, I also use the Golem BOV on my Inspo. I am looking to replace the mouthpiece, as on long dives I get a jaw fatigue. I also previously used the SeaCure in OC and was always very happy with it. Can you tell me which size of the new highflow is needed for the Golem? Thanks. Rgds, André
(Offline)

5th December 2007, 05:44	#16 (permalink)
dlh New Member Current Rebreather/s: Sport Kiss Other Rebreather/s: Join Date: Sep 2007 Location: Seattle Posts: 11	Re: SeaCure I recently started diving a Sport Kiss and had a lot of jaw fatigue due to the relatively heavy DSV. I picked up a SeaCure about 6 dives ago and had an immediate improvement! No more sore jaw muscles at all. I was advised to wrap a few layers of electrical tape or silicone glue around the mounting point before attaching the SeaCure, and this worked well. I used about 3 loops to tape and have not had any leakage to speak of. Dave
(Offline)

5th December 2007, 05:49	#17 (permalink)
SkinAndScuba New Member Current Rebreather/s: Optima Other Rebreather/s: Optima Join Date: Oct 2006 Location: South Africa Three Rivers Posts: 40	Re: SeaCure Quote: (Originally Posted by Zbi) Hello Mark, I also use the Golem BOV on my Inspo. I am looking to replace the mouthpiece, as on long dives I get a jaw fatigue. I also previously used the SeaCure in OC and was always very happy with it. Can you tell me which size of the new highflow is needed for the Golem? Thanks. Rgds, André According to Jakub you require a number III seacure for the Golem BOV. I've just got my Seacure, but have still to fit it. Used to use the Seacure for OC and I have to agree it helped a lot on longer dives. I just found them tricky to get molded so that it did not hurt my jaw. once I moulded it so that it never touched the gum at all it was great. Can't wait to try the new one on the CCR. __________________ Kenneth Wessels #19799 Skin & Scuba The only South African Optima diver 2007/01-2008/07, and to my knowledge the only Africa Optima diver.
(Online)

5th December 2007, 06:07	#18 (permalink)
grandizer52 Sport Kiss & Shearwater Current Rebreather/s: Sport Kiss Other CCR Home Build Other Rebreather/s: Not Bought Yet Sport Kiss Classic Kiss MK 15.X Other CCR Home Build Join Date: May 2006 Location: pearl city hawaii EARTH moving to Iscandar Posts: 254	Re: SeaCure @ present, I have it on the Sport Kiss as well used the SEACURE II, just like on the Dolphin, I had to heat up the DSV side first to get it on, and it was tighter than a strippers wallet, never leaked, got one on the wifes OC reg...it's a BISM from japan. that was wierd laytah steve
(Offline)

5th December 2007, 06:37	#19 (permalink)
duffmiver New Member Current Rebreather/s: Sport Kiss Other Rebreather/s: Inspiration Classic Join Date: Feb 2007 Location: SF CA Posts: 19	Re: SeaCure which size fits the sport kiss???
(Offline)

5th December 2007, 13:03	#20 (permalink)
Marvintpa Bad knees, matching brain Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Mar 2005 Location: Ontario, Canada Posts: 264	Re: SeaCure I've tried two SeaCure's on the RB80 just to make sure it wasn't a molding issue (ie. my fault). The seal is excellent, no leaks, but the gum abuse is considerable and I had to scrap 'em.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode