Drager Ray Overview

TigerCD · 8th February 2008, 15:58

Quote:

1. Drill a hole in the cap of Ray Dosage unit so you can manual add by pushing through the hole in the cap and against the diaphram.

There`s just a little problem...how will you reach the hole?

Quote:

2. Keep the Ray Dosage unit and solder or weld the hole shut on any of the constant flow orifices.

sorry - for 35 Euro - i don`t wanna destroy the 50% Ray Bypass valve..

**SeaBass** · 8th February 2008, 18:32

Quote: (Originally Posted by TigerCD)

There`s just a little problem...how will you reach the hole?

Sorry, that suggestion was for after you threw away the vest and made real OTSCL's.

Quote: (Originally Posted by TigerCD)

sorry - for 35 Euro - i don`t wanna destroy the 50% Ray Bypass valve..

Thinking of going back to SCR?

Not sure about Germany but here in "Dollar diminishing" US the whole dosage unit can be had for about $50 off ebay.

Thom

.

divetheworld · 8th February 2008, 22:00

The scrubbers a beauty. Make a longer outer and inner tube and you can hit 180mins. Modify the ADV as previously stated with the soldering iron and fit it in the P port in the bottom of the scrubber.
Dump the lungs and BCD and fit it with two 3ltrs on either side on a harness with OTS or back mounted lungs. You can squeeze three O2 cells in the scrubber lid. Drill it and fit a gland to go to a Pursuit.
We do P port to loop adaptors for the top of the scrubber.
Sweet.

8th February 2008, 15:58	#21 (permalink)
TigerCD New Member Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Dec 2007 Location: Germany / Bayern Posts: 5	Re: Drager Ray Overview Quote: 1. Drill a hole in the cap of Ray Dosage unit so you can manual add by pushing through the hole in the cap and against the diaphram. There`s just a little problem...how will you reach the hole? Quote: 2. Keep the Ray Dosage unit and solder or weld the hole shut on any of the constant flow orifices. sorry - for 35 Euro - i don`t wanna destroy the 50% Ray Bypass valve..
(Offline)

8th February 2008, 18:32	#22 (permalink)
SeaBass Thom Susko Current Rebreather/s: Megalodon Ray Home Build Other Rebreather/s: Not Bought Yet Ray Home Build Join Date: Jul 2006 Location: San Clemente, CA Posts: 232	Re: Drager Ray Overview Quote: (Originally Posted by TigerCD) There`s just a little problem...how will you reach the hole? Sorry, that suggestion was for after you threw away the vest and made real OTSCL's. Quote: (Originally Posted by TigerCD) sorry - for 35 Euro - i don`t wanna destroy the 50% Ray Bypass valve.. Thinking of going back to SCR? Not sure about Germany but here in "Dollar diminishing" US the whole dosage unit can be had for about $50 off ebay. Thom .
(Offline)

8th February 2008, 22:00	#23 (permalink)
divetheworld Dive porn pimp Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Classic Kiss Other CCR Join Date: Mar 2005 Location: Leeds, England Posts: 1,586	Re: Drager Ray Overview The scrubbers a beauty. Make a longer outer and inner tube and you can hit 180mins. Modify the ADV as previously stated with the soldering iron and fit it in the P port in the bottom of the scrubber. Dump the lungs and BCD and fit it with two 3ltrs on either side on a harness with OTS or back mounted lungs. You can squeeze three O2 cells in the scrubber lid. Drill it and fit a gland to go to a Pursuit. We do P port to loop adaptors for the top of the scrubber. Sweet. __________________ Attitude and self praise is no reccomendation. Dont try to be a great man, just be a man and let history be the judge of you. CHECK OUT OUR INTERWEBS FOR CUSTOM REBREATHER UPGRADES *WWW.NARKEDAT90.CO.UK* *http://www.grpservices.com/pursuit/* Supporting Shearwater Research Products in Europe
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode