Dsix stand for the rEvo

Dsix36 · 30th January 2009, 22:08

I am currently designing and trial diving a stand for my rEvo. I think that I have got the final version worked out.

I am asking for advice/input from other rEvo divers as to the features that they might like to find on such a contraption.

Right now it raises the unit to a comfortable donning height, has attachment points for sidemounting BO cylinders and reels (etc), and a spot for a cam band to attach a small tank.

It answers all of my concerns, but I may be overlooking something.

Any input will be appreciated.

swadiver · 30th January 2009, 22:22

Quote: (Originally Posted by Dsix36)

I am currently designing and trial diving a stand for my rEvo. I think that I have got the final version worked out.

I am asking for advice/input from other rEvo divers as to the features that they might like to find on such a contraption.

Right now it raises the unit to a comfortable donning height, has attachment points for sidemounting BO cylinders and reels (etc), and a spot for a cam band to attach a small tank.

It answers all of my concerns, but I may be overlooking something.

Any input will be appreciated.

So where is a picture? You think we are mindreaders?

Diverlee · 30th January 2009, 22:27

Quote: (Originally Posted by swadiver)

So where is a picture? You think we are mindreaders?

Yea Don, how is anyone supposed to make any sugestions when they can't even see what your talking about.
:p

pieater · 30th January 2009, 22:32

Keep everything away from the buttons!!

This is why I like the "extra brackets with D rings on" solution.

Dsix36 · 30th January 2009, 22:44

Quote: (Originally Posted by swadiver)

So where is a picture? You think we are mindreaders?

Quote: (Originally Posted by Diverlee)

Yea Don, how is anyone supposed to make any sugestions when they can't even see what your talking about.
:p

Both of you should read the second sentence again. What-the-heck, I will listen to lowly optima divers too. ;)

Here is a pic for those of you who might be lacking in the imagination department (read as "brains").

Mike448 · 30th January 2009, 22:57

Hey Don. I apologize if this has already been covered in another thread, but do you have a Meg version of your stand?

Dsix36 · 30th January 2009, 23:12

Quote: (Originally Posted by Mike448)

Hey Don. I apologize if this has already been covered in another thread, but do you have a Meg version of your stand?

Not yet, Netmage has mentioned it a couple of times. I don't have a meg sitting around to get measurements from.

Dsix36 · 30th January 2009, 23:15

Quote: (Originally Posted by pieater)

Keep it everything away from the buttons!!

This is why I like the "extra brackets with D rings on" solution.

The entire stand is set inside of the buttons. It is not an issue at all.

The first attempt was a different story though

sea2summit · 30th January 2009, 23:26

Looks good, don't know about the cut outs (entanglement?).
For a nominal fee I'll test one out

paulraymaekers · 31st January 2009, 09:33

Quote: (Originally Posted by Dsix36)

I am currently designing and trial diving a stand for my rEvo. I think that I have got the final version worked out.

I am asking for advice/input from other rEvo divers as to the features that they might like to find on such a contraption.

Right now it raises the unit to a comfortable donning height, has attachment points for sidemounting BO cylinders and reels (etc), and a spot for a cam band to attach a small tank.

It answers all of my concerns, but I may be overlooking something.

Any input will be appreciated.

why did you buy a mini rEvo??

the standard rEvo has +/- this height!

paul

30th January 2009, 22:08	#1 (permalink)
Dsix36 anti-hammerhead rEvo Optima Dolphin Join Date: Aug 2007 Location: Deerfield_Beach, Florida Posts: 3,448	Dsix stand for the rEvo I am currently designing and trial diving a stand for my rEvo. I think that I have got the final version worked out. I am asking for advice/input from other rEvo divers as to the features that they might like to find on such a contraption. Right now it raises the unit to a comfortable donning height, has attachment points for sidemounting BO cylinders and reels (etc), and a spot for a cam band to attach a small tank. It answers all of my concerns, but I may be overlooking something. Any input will be appreciated.
(Online)

30th January 2009, 22:22	#2 (permalink)
swadiver jeff addis Revo Optima Join Date: May 2006 Location: southeast florida Posts: 972	Re: Dsix stand for the rEvo Quote: (Originally Posted by Dsix36) I am currently designing and trial diving a stand for my rEvo. I think that I have got the final version worked out. I am asking for advice/input from other rEvo divers as to the features that they might like to find on such a contraption. Right now it raises the unit to a comfortable donning height, has attachment points for sidemounting BO cylinders and reels (etc), and a spot for a cam band to attach a small tank. It answers all of my concerns, but I may be overlooking something. Any input will be appreciated. So where is a picture? You think we are mindreaders?
(Online)

30th January 2009, 22:27	#3 (permalink)
Diverlee RBW Member OPTIMA Join Date: Nov 2007 Location: Pompano Beach, FL Posts: 214	Re: Dsix stand for the rEvo Quote: (Originally Posted by swadiver) So where is a picture? You think we are mindreaders? Yea Don, how is anyone supposed to make any sugestions when they can't even see what your talking about. :p
(Offline)

30th January 2009, 22:32	#4 (permalink)
pieater Grand Beede' Join Date: Oct 2006 Posts: 161	Re: Dsix stand for the rEvo Keep everything away from the buttons!! This is why I like the "extra brackets with D rings on" solution. Last edited by pieater; 30th January 2009 at 23:15..
(Offline)

30th January 2009, 22:44	#5 (permalink)
Dsix36 anti-hammerhead rEvo Optima Dolphin Join Date: Aug 2007 Location: Deerfield_Beach, Florida Posts: 3,448	Re: Dsix stand for the rEvo Quote: (Originally Posted by swadiver) So where is a picture? You think we are mindreaders? Quote: (Originally Posted by Diverlee) Yea Don, how is anyone supposed to make any sugestions when they can't even see what your talking about. :p Both of you should read the second sentence again. What-the-heck, I will listen to lowly optima divers too. ;) Here is a pic for those of you who might be lacking in the imagination department (read as "brains").
(Online)

30th January 2009, 22:57	#6 (permalink)
Mike448 Mike O'Neill Megalodon Join Date: Apr 2007 Location: Ft Lauderdale (Florida) & Knysna (South Africa) Posts: 90	Re: Dsix stand for the rEvo Hey Don. I apologize if this has already been covered in another thread, but do you have a Meg version of your stand?
(Offline)

30th January 2009, 23:12	#7 (permalink)
Dsix36 anti-hammerhead rEvo Optima Dolphin Join Date: Aug 2007 Location: Deerfield_Beach, Florida Posts: 3,448	Re: Dsix stand for the rEvo Quote: (Originally Posted by Mike448) Hey Don. I apologize if this has already been covered in another thread, but do you have a Meg version of your stand? Not yet, Netmage has mentioned it a couple of times. I don't have a meg sitting around to get measurements from.
(Online)

30th January 2009, 23:15	#8 (permalink)
Dsix36 anti-hammerhead rEvo Optima Dolphin Join Date: Aug 2007 Location: Deerfield_Beach, Florida Posts: 3,448	Re: Dsix stand for the rEvo Quote: (Originally Posted by pieater) Keep it everything away from the buttons!! This is why I like the "extra brackets with D rings on" solution. The entire stand is set inside of the buttons. It is not an issue at all. The first attempt was a different story though
(Online)

30th January 2009, 23:26	#9 (permalink)
sea2summit Wannabe...diven the best oNe Join Date: May 2007 Location: Ft. Lewis Posts: 487	Re: Dsix stand for the rEvo Looks good, don't know about the cut outs (entanglement?). For a nominal fee I'll test one out
(Offline)

31st January 2009, 09:33	#10 (permalink)
paulraymaekers rEvo's daddy rEvo Join Date: May 2005 Location: belgium Posts: 3,641	Re: Dsix stand for the rEvo Quote: (Originally Posted by Dsix36) I am currently designing and trial diving a stand for my rEvo. I think that I have got the final version worked out. I am asking for advice/input from other rEvo divers as to the features that they might like to find on such a contraption. Right now it raises the unit to a comfortable donning height, has attachment points for sidemounting BO cylinders and reels (etc), and a spot for a cam band to attach a small tank. It answers all of my concerns, but I may be overlooking something. Any input will be appreciated. why did you buy a mini rEvo?? the standard rEvo has +/- this height! paul __________________ www.rEvo-rebreathers.com ...."Yes you have to pre-breathe to activate the scrubber sorb, anyone who says different doesn't know what they are talking about!"... .... to get more accurate CO2 injection in the breathing machine we put 2 mass flow controllers in series ... .... radial scrubbers give longer dwell time than axials... .... the earth is flat and ...
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.rebreatherworld.com/revo-rebreather/24627-dsix-stand-for-the-revo.html
Posted By	For	Type	Date
rEvo størrelse	This thread	Refback	29th April 2012 16:56
rEvo størrelse	This thread	Refback	14th April 2012 14:36
rEvo størrelse	This thread	Refback	6th April 2012 00:53
rEvo størrelse	This thread	Refback	4th April 2012 15:38
rEvo størrelse	This thread	Refback	3rd April 2012 15:48
rEvo størrelse	This thread	Refback	3rd April 2012 07:48
rEvo størrelse	This thread	Refback	3rd April 2012 05:45
rEvo Rebreather [Archive] - Page 3 - Rebreather World	This thread	Refback	30th January 2010 19:26
rEvo Rebreather [Archive] - Rebreather World	This thread	Refback	22nd June 2009 14:46