wob kits in!

**kybrt** · 5th August 2008, 03:49

ok so i got the wob kit. looking at it i was thinking, there is no way i do this w/o slicing a counterlung. but i managed not to.

i did get a p port half way off until i realized paul does not want you to take them off.

and the grid goes in easier if you roll it up like a burrito, it easier to clamp it together when its inside too.

i also put some extra rubber inner tube around the edge of the ss mesh to keep the c/l 's together.

i dove it in my parents pool tonite, and it does feel different. with the pelegian bov its sweet when trimmed out and not too bad even when chipmunk cheeked out. granted this was at eight feet down.

i will post a note when i actually dive it.

paulraymaekers · 5th August 2008, 08:58

Quote: (Originally Posted by kybrt)

ok so i got the wob kit. looking at it i was thinking, there is no way i do this w/o slicing a counterlung. but i managed not to.

i did get a p port half way off until i realized paul does not want you to take them off.

and the grid goes in easier if you roll it up like a burrito, it easier to clamp it together when its inside too.

i also put some extra rubber inner tube around the edge of the ss mesh to keep the c/l 's together.

i dove it in my parents pool tonite, and it does feel different. with the pelegian bov its sweet when trimmed out and not too bad even when chipmunk cheeked out. granted this was at eight feet down.

i will post a note when i actually dive it.

hi Al, I suppose you saw the manual 'how to install the WOB kit'??

it's on our website!

the grids are rolled and fixed before installing!! and no need to remove any port!

regards
paul

CCR-Wrecker · 5th August 2008, 19:19

Quote: (Originally Posted by paulraymaekers)

hi Al, I suppose you saw the manual 'how to install the WOB kit'??

it's on our website!

the grids are rolled and fixed before installing!! and no need to remove any port!

regards
paul

Paul,

I don't think you understand Al is a New yorker.

"Directions?? manuals?? who needs them?"

Regards,
Andy

**kybrt** · 6th August 2008, 03:07

paul,

i saw the manual before, im a little dense sometimes.

when the grids are together they didnt seem to want to fit inside the p port, so then i saw the pic with the pport out. then i read a little further and stopped removing it.

then i sat down and thought really hard for a few minutes..........

then i rolled the grid onto itself like a burrito and it slid right inside.

**kybrt** · 6th August 2008, 03:08

andy,

its " 'dem"

as in "who needz dem?"

fuggeedddawbowdit.

5th August 2008, 03:49	#1 (permalink)
kybrt too legit to quit Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Jan 2007 Location: Neuw Yawk Posts: 375	wob kits in! ok so i got the wob kit. looking at it i was thinking, there is no way i do this w/o slicing a counterlung. but i managed not to. i did get a p port half way off until i realized paul does not want you to take them off. and the grid goes in easier if you roll it up like a burrito, it easier to clamp it together when its inside too. i also put some extra rubber inner tube around the edge of the ss mesh to keep the c/l 's together. i dove it in my parents pool tonite, and it does feel different. with the pelegian bov its sweet when trimmed out and not too bad even when chipmunk cheeked out. granted this was at eight feet down. i will post a note when i actually dive it. __________________ Marv Fidelis Ad Mortem www.diveboatkaren.com
(Offline)

5th August 2008, 08:58	#2 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,578	Re: wob kits in! Quote: (Originally Posted by kybrt) ok so i got the wob kit. looking at it i was thinking, there is no way i do this w/o slicing a counterlung. but i managed not to. i did get a p port half way off until i realized paul does not want you to take them off. and the grid goes in easier if you roll it up like a burrito, it easier to clamp it together when its inside too. i also put some extra rubber inner tube around the edge of the ss mesh to keep the c/l 's together. i dove it in my parents pool tonite, and it does feel different. with the pelegian bov its sweet when trimmed out and not too bad even when chipmunk cheeked out. granted this was at eight feet down. i will post a note when i actually dive it. hi Al, I suppose you saw the manual 'how to install the WOB kit'?? it's on our website! the grids are rolled and fixed before installing!! and no need to remove any port! regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Online)

5th August 2008, 19:19	#3 (permalink)
CCR-Wrecker aka NY-Andy Current Rebreather/s: Inspiration Classic Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Apr 2005 Location: New York Posts: 226	Re: wob kits in! Quote: (Originally Posted by paulraymaekers) hi Al, I suppose you saw the manual 'how to install the WOB kit'?? it's on our website! the grids are rolled and fixed before installing!! and no need to remove any port! regards paul Paul, I don't think you understand Al is a New yorker. "Directions?? manuals?? who needs them?" Regards, Andy __________________ "I know what you'll find, it's in your mind, it's what you want to see..." Ozzy
(Offline)

6th August 2008, 03:07	#4 (permalink)
kybrt too legit to quit Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Jan 2007 Location: Neuw Yawk Posts: 375	Re: wob kits in! paul, i saw the manual before, im a little dense sometimes. when the grids are together they didnt seem to want to fit inside the p port, so then i saw the pic with the pport out. then i read a little further and stopped removing it. then i sat down and thought really hard for a few minutes.......... then i rolled the grid onto itself like a burrito and it slid right inside. __________________ Marv Fidelis Ad Mortem www.diveboatkaren.com
(Offline)

6th August 2008, 03:08	#5 (permalink)
kybrt too legit to quit Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Jan 2007 Location: Neuw Yawk Posts: 375	Re: wob kits in! andy, its " 'dem" as in "who needz dem?" fuggeedddawbowdit. __________________ Marv Fidelis Ad Mortem www.diveboatkaren.com
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode