Mouthpiece

Sune Jorgensen · 18th June 2008, 02:14

What custom moutpiece will fit on a standard rEvo (about 45mm wide) a SeaCURE, Jax or ?

Stephane · 18th June 2008, 05:28

Hello Sune,

Jax, no way. I tried to fit one, not wide enough even when put in hot water.
Seacure, they have a wide version, maybe this will fit.

Scuba Cowboy · 18th June 2008, 05:31

Quote: (Originally Posted by Stephane)

Hello Sune,

Jax, no way. I tried to fit one, not wide enough even when put in hot water.
Seacure, they have a wide version, maybe this will fit.

I really want a Sea Cure on my rEvo. I'm going to have to contact them about making one.

Loanwolf · 19th June 2008, 06:40

we have put sea-cures on several. you have to be carefully when putting it on, because it stretches a little. heat the base as well as the tangs for your teeth. also make sure you put it on with silicone to seal it good so their are no leaks.

paulraymaekers · 19th June 2008, 09:49

Quote: (Originally Posted by Loanwolf)

we have put sea-cures on several. you have to be carefully when putting it on, because it stretches a little. heat the base as well as the tangs for your teeth. also make sure you put it on with silicone to seal it good so their are no leaks.

why does everyone want to remove a safety-part of a rebreather??the mouthpiece we supplie gives extra safety, and for 5h dives, no jaw fatigue at all (you can easely adjust the strain on the rubber 'holders'paul

Sune Jorgensen · 19th June 2008, 11:37

Quote: (Originally Posted by Sune Jorgensen)

What custom moutpiece will fit on a standard rEvo (about 45mm wide) a SeaCURE, Jax or ?

Did find a nice description of the SeaCURE:
Regulator Mouthpieces

Sune Jorgensen · 19th June 2008, 11:43

Quote: (Originally Posted by paulraymaekers)

why does everyone want to remove a safety-part of a rebreather??the mouthpiece we supplie gives extra safety, and for 5h dives, no jaw fatigue at all (you can easely adjust the strain on the rubber 'holders'paul

Why is the mouthpiece not in the rEvo pricelist and what is the "safety mouthpiece" ?

Hanssing · 19th June 2008, 11:45

Quote: (Originally Posted by paulraymaekers)

why does everyone want to remove a safety-part of a rebreather??the mouthpiece we supplie gives extra safety, and for 5h dives, no jaw fatigue at all (you can easely adjust the strain on the rubber 'holders'paul

Well I for one removed as part of the course was doing frequent Bailouts.
I thought it inhibited hasslefree bailout to a necklaced regulator.

With a BOV I would keep it.

Nicolai

paulraymaekers · 19th June 2008, 12:41

Quote: (Originally Posted by Sune Jorgensen)

Why is the mouthpiece not in the rEvo pricelist and what is the "safety mouthpiece" ?

it is standard on the unit: the drager mouthpiece with the rubber straps that hold the dsv in your mouth, even when you go unconcious.. if you have the straps 'strapped' offcourse

and it is on the pricelist as spare

if you practice, even on an emergency bail-out, no problem to remove it, even with the rubbers strapped!: just pull it down, and the rubbers come down also.

during training, either leave the rubbers less strapped, so that you can take off the mouthpiece easier for all the switches between OC and CC, if you want the DSV flooting above your head, either pull it down and it stays around your neck while breathing from OC

paul

scubagrunt · 19th June 2008, 12:41

Quote: (Originally Posted by paulraymaekers)

why does everyone want to remove a safety-part of a rebreather??the mouthpiece we supplie gives extra safety, and for 5h dives, no jaw fatigue at all (you can easely adjust the strain on the rubber 'holders'paul

sorry paul some of us get tmj from anything other than sea cure. i hate having my jaw lock and pop for hours after the dive!!

to answer question. sea cure high flow # II can be gently heated and stretched to fit the rEvo. then use silicon sealent to ensure a seal between the dsv and sea cure.
i wrote up directions quite a while back for the sea cure fitting on a meg. check it out it may help
mel

18th June 2008, 02:14	#1 (permalink)
Sune Jorgensen New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Jan 2008 Location: Denmark Posts: 34	Mouthpiece What custom moutpiece will fit on a standard rEvo (about 45mm wide) a SeaCURE, Jax or ? __________________ /Sune rEvo by choice
(Online)

18th June 2008, 05:28	#2 (permalink)
Stephane Stéphane Acounis Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Nantes - France Posts: 769	Re: Mouthpiece Hello Sune, Jax, no way. I tried to fit one, not wide enough even when put in hot water. Seacure, they have a wide version, maybe this will fit. __________________ Stéphane
(Online)

18th June 2008, 05:31	#3 (permalink)
Scuba Cowboy New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Dec 2007 Location: Arizona Posts: 17	Re: Mouthpiece Quote: (Originally Posted by Stephane) Hello Sune, Jax, no way. I tried to fit one, not wide enough even when put in hot water. Seacure, they have a wide version, maybe this will fit. I really want a Sea Cure on my rEvo. I'm going to have to contact them about making one.
(Offline)

19th June 2008, 06:40	#4 (permalink)
Loanwolf New Member Current Rebreather/s: rEvo Other Rebreather/s: Inspiration Classic Evolution Megalodon Classic Kiss MK 15.X Optima rEvo Join Date: Jan 2008 Location: Where I hang my hat at the moment. Posts: 54	Re: Mouthpiece we have put sea-cures on several. you have to be carefully when putting it on, because it stretches a little. heat the base as well as the tangs for your teeth. also make sure you put it on with silicone to seal it good so their are no leaks. __________________ Life is Short do as Much as You can in as Short of Period of Time as Possible.
(Offline)

19th June 2008, 09:49	#5 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,506	Re: Mouthpiece Quote: (Originally Posted by Loanwolf) we have put sea-cures on several. you have to be carefully when putting it on, because it stretches a little. heat the base as well as the tangs for your teeth. also make sure you put it on with silicone to seal it good so their are no leaks. why does everyone want to remove a safety-part of a rebreather??the mouthpiece we supplie gives extra safety, and for 5h dives, no jaw fatigue at all (you can easely adjust the strain on the rubber 'holders'paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

19th June 2008, 11:37	#6 (permalink)
Sune Jorgensen New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Jan 2008 Location: Denmark Posts: 34	Re: Mouthpiece Quote: (Originally Posted by Sune Jorgensen) What custom moutpiece will fit on a standard rEvo (about 45mm wide) a SeaCURE, Jax or ? Did find a nice description of the SeaCURE: Regulator Mouthpieces __________________ /Sune rEvo by choice
(Online)

19th June 2008, 11:43	#7 (permalink)
Sune Jorgensen New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Jan 2008 Location: Denmark Posts: 34	Re: Mouthpiece Quote: (Originally Posted by paulraymaekers) why does everyone want to remove a safety-part of a rebreather??the mouthpiece we supplie gives extra safety, and for 5h dives, no jaw fatigue at all (you can easely adjust the strain on the rubber 'holders'paul Why is the mouthpiece not in the rEvo pricelist and what is the "safety mouthpiece" ? __________________ /Sune rEvo by choice
(Online)

19th June 2008, 11:45	#8 (permalink)
Hanssing flap-flop ..... flap-flop Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Denmark Posts: 407	Re: Mouthpiece Quote: (Originally Posted by paulraymaekers) why does everyone want to remove a safety-part of a rebreather??the mouthpiece we supplie gives extra safety, and for 5h dives, no jaw fatigue at all (you can easely adjust the strain on the rubber 'holders'paul Well I for one removed as part of the course was doing frequent Bailouts. I thought it inhibited hasslefree bailout to a necklaced regulator. With a BOV I would keep it. Nicolai __________________ Woohooo - I can change my rEvo! Its going to be bitchin' tricked out piece of gear
(Offline)

19th June 2008, 12:41	#9 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,506	Re: Mouthpiece Quote: (Originally Posted by Sune Jorgensen) Why is the mouthpiece not in the rEvo pricelist and what is the "safety mouthpiece" ? it is standard on the unit: the drager mouthpiece with the rubber straps that hold the dsv in your mouth, even when you go unconcious.. if you have the straps 'strapped' offcourse and it is on the pricelist as spare if you practice, even on an emergency bail-out, no problem to remove it, even with the rubbers strapped!: just pull it down, and the rubbers come down also. during training, either leave the rubbers less strapped, so that you can take off the mouthpiece easier for all the switches between OC and CC, if you want the DSV flooting above your head, either pull it down and it stays around your neck while breathing from OC paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

19th June 2008, 12:41	#10 (permalink)
scubagrunt CCR Diva Current Rebreather/s: Inspiration Classic Megalodon Classic Kiss Optima rEvo Other CCR Other SCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Evolution Megalodon Sport Kiss Classic Kiss Optima rEvo Other CCR Other SCR Join Date: May 2005 Location: Washington Posts: 432	Re: Mouthpiece Quote: (Originally Posted by paulraymaekers) why does everyone want to remove a safety-part of a rebreather??the mouthpiece we supplie gives extra safety, and for 5h dives, no jaw fatigue at all (you can easely adjust the strain on the rubber 'holders'paul sorry paul some of us get tmj from anything other than sea cure. i hate having my jaw lock and pop for hours after the dive!! to answer question. sea cure high flow # II can be gently heated and stretched to fit the rEvo. then use silicon sealent to ensure a seal between the dsv and sea cure. i wrote up directions quite a while back for the sea cure fitting on a meg. check it out it may help mel __________________ "No good deed goes unpunished!" www.silentscuba.com
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode