TransPak Mod

Loanwolf · 6th June 2008, 23:14

I know their are a few others out their who do not like the fastex buckles on the harness. This is what i have done with mine to solve that issue and to make a good mounting point for the off-board gas block.

items used.

1) 36" 1.5" weight belt webbing
2) 2 Delrin 1.5" double sliders
3) 1 - 1.5" Delrin cam-lock buckle
4) 2 - 2" x 3/16" stainless rings

Steps

1) remove old rings and webbing.
2) attach new ring and webbing right side of rig.
3) thread webbing though waist plate and sliders.
4) position off-board gas block where you want it, and note it.
5) undo slider, take white plate as a template to mark where the holes go.
6) burn holes in the webbing to permanently mount block.
7) mount up the block, reattach the slider, and check the fit.
8) rig up left side ring and webbing.
9) using slider attach cam-lock on lower plate hook up webbing, (with weight belt webbing you may need to file a little off the cam-lock).
10) check fit.

Paul do you have a block with a black button? I would like to put it on the left side for off-board dill.

Greg

scubagrunt · 7th June 2008, 08:20

Quote: (Originally Posted by Loanwolf)

I know their are a few others out their who do not like the fastex buckles on the harness. This is what i have done with mine to solve that issue and to make a good mounting point for the off-board gas block.

items used.

1) 36" 1.5" weight belt webbing
2) 2 Delrin 1.5" double sliders
3) 1 - 1.5" Delrin cam-lock buckle
4) 2 - 2" x 3/16" stainless rings

Steps

1) remove old rings and webbing.
2) attach new ring and webbing right side of rig.
3) thread webbing though waist plate and sliders.
4) position off-board gas block where you want it, and note it.
5) undo slider, take white plate as a template to mark where the holes go.
6) burn holes in the webbing to permanently mount block.
7) mount up the block, reattach the slider, and check the fit.
8) rig up left side ring and webbing.
9) using slider attach cam-lock on lower plate hook up webbing, (with weight belt webbing you may need to file a little off the cam-lock).
10) check fit.

Paul do you have a block with a black button? I would like to put it on the left side for off-board dill.

Greg

nice write up greg
have some green

Loanwolf · 7th June 2008, 16:15

I had extras made if you want one.

scubagrunt · 8th June 2008, 06:29

Quote: (Originally Posted by Loanwolf)

I had extras made if you want one.

sure do!!!!

7th June 2008, 08:20	#2 (permalink)
scubagrunt CCR Diva Current Rebreather/s: Inspiration Classic Megalodon Classic Kiss Optima rEvo Other CCR Other SCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Evolution Megalodon Sport Kiss Classic Kiss Optima rEvo Other CCR Other SCR Join Date: May 2005 Location: Washington Posts: 423	Re: TransPak Mod Quote: (Originally Posted by Loanwolf) I know their are a few others out their who do not like the fastex buckles on the harness. This is what i have done with mine to solve that issue and to make a good mounting point for the off-board gas block. items used. 1) 36" 1.5" weight belt webbing 2) 2 Delrin 1.5" double sliders 3) 1 - 1.5" Delrin cam-lock buckle 4) 2 - 2" x 3/16" stainless rings Steps 1) remove old rings and webbing. 2) attach new ring and webbing right side of rig. 3) thread webbing though waist plate and sliders. 4) position off-board gas block where you want it, and note it. 5) undo slider, take white plate as a template to mark where the holes go. 6) burn holes in the webbing to permanently mount block. 7) mount up the block, reattach the slider, and check the fit. 8) rig up left side ring and webbing. 9) using slider attach cam-lock on lower plate hook up webbing, (with weight belt webbing you may need to file a little off the cam-lock). 10) check fit. Paul do you have a block with a black button? I would like to put it on the left side for off-board dill. Greg nice write up greg have some green __________________ "No good deed goes unpunished!" www.silentscuba.com
(Offline)

7th June 2008, 16:15	#3 (permalink)
Loanwolf New Member Current Rebreather/s: rEvo Other Rebreather/s: Inspiration Classic Evolution Megalodon Classic Kiss MK 15.X Optima rEvo Join Date: Jan 2008 Location: Where I hang my hat at the moment. Posts: 36	Re: TransPak Mod I had extras made if you want one. __________________ Life is Short do as Much as You can in as Short of Period of Time as Possible.
(Offline)

8th June 2008, 06:29	#4 (permalink)
scubagrunt CCR Diva Current Rebreather/s: Inspiration Classic Megalodon Classic Kiss Optima rEvo Other CCR Other SCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Evolution Megalodon Sport Kiss Classic Kiss Optima rEvo Other CCR Other SCR Join Date: May 2005 Location: Washington Posts: 423	Re: TransPak Mod Quote: (Originally Posted by Loanwolf) I had extras made if you want one. sure do!!!! __________________ "No good deed goes unpunished!" www.silentscuba.com
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode