The Golem BOV Project

paulraymaekers · 2nd February 2008, 19:52

Quote: (Originally Posted by Tyler S.)

Well, I broke the SS mount for my HUD by trying to bend it. But in doing so I found a cool way to remounbt it using the broken piece. Ill post pics later to show you can it actually makes then sit lower so they are not blocking your vision as much

if the hud is blocking your vision (depends on your face and your mask), we also have complete flat brackets, a bit inclined towards the center of your face
most people need the mount that puts the HUD's a bit higher, but some find it to high
paul

Tyler S. · 3rd February 2008, 00:31

Hey Pauly Ill take a couple of those!!!!!

Stephane · 3rd February 2008, 05:18

Hi Tyler,

You don't want flat brackets, it will be impossible to mount the HUDs, the main body on the Golem BOV is too big and the cable glands will block. Look at the photos I posted.
Ask Paul to send you a bracket for a single HUD and make yourself a little plate.

Marc T · 3rd February 2008, 08:54

Quote: (Originally Posted by paulraymaekers)

if the hud is blocking your vision
paul

And dont forget to try to change the side, its usually more confortable on you "stronger" eye

2nd February 2008, 19:52	#11 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,498	Re: The Golem BOV Project Quote: (Originally Posted by Tyler S.) Well, I broke the SS mount for my HUD by trying to bend it. But in doing so I found a cool way to remounbt it using the broken piece. Ill post pics later to show you can it actually makes then sit lower so they are not blocking your vision as much if the hud is blocking your vision (depends on your face and your mask), we also have complete flat brackets, a bit inclined towards the center of your face most people need the mount that puts the HUD's a bit higher, but some find it to high paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

3rd February 2008, 00:31	#12 (permalink)
Tyler S. rEject Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: San Diego Posts: 230	Re: The Golem BOV Project Hey Pauly Ill take a couple of those!!!!!
(Offline)

3rd February 2008, 05:18	#13 (permalink)
Stephane Stéphane Acounis Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Nantes - France Posts: 773	Re: The Golem BOV Project Hi Tyler, You don't want flat brackets, it will be impossible to mount the HUDs, the main body on the Golem BOV is too big and the cable glands will block. Look at the photos I posted. Ask Paul to send you a bracket for a single HUD and make yourself a little plate. __________________ Stéphane
(Offline)

3rd February 2008, 08:54	#14 (permalink)
Marc T hell is in the details Current Rebreather/s: RB80 / Clone Home Build Other Rebreather/s: Not Bought Yet RB80 / Clone Home Build Join Date: Sep 2005 Location: FRANCE Carcassonne Posts: 485	Re: The Golem BOV Project Quote: (Originally Posted by paulraymaekers) if the hud is blocking your vision paul And dont forget to try to change the side, its usually more confortable on you "stronger" eye
(Online)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode