rEvo possibilities

ebourzeix · 25th April 2007, 20:50

Swiss idea to keep fresh soda lime

Not yet CE cheese

By the way, could I find this paper-filter here in Geneva (old reflex to get some spare part) ?

Regards,
Eric

**Dave Sutton** · 25th April 2007, 21:25

Quote: (Originally Posted by ebourzeix)

Swiss idea to keep fresh soda lime

Eric

Nice!

I found that both of the scrubbers fit side by side into one of the smaller Pelican cases, the one just smaller than a briefcase. I'm planning on grabbing 2 spare scrubbers so I can keep a pair loaded for multi day trips and will carry them loaded in the Pelican case.

Paul will have the fabric.

Dave

J. V. · 26th April 2007, 06:52

If there is an Inspiration reseller in Geneva, you can take the Inspiration paper, it's exactly the same size.
Other possibility, you cut a filter in a "filtre à graisse pour hotte de cuisine".
Or, naturally, order to Paul or Philippe.

paulraymaekers · 26th April 2007, 07:02

Quote: (Originally Posted by J. V.)

If there is an Inspiration reseller in Geneva, you can take the Inspiration paper, it's exactly the same size.
Other possibility, you cut a filter in a "filtre à graisse pour hotte de cuisine".
Or, naturally, order to Paul or Philippe.

it's not paper :-)

and if you use the 'filtre à graisse pour hotte de cuisine', it works ok, but the filter is eaten by the sorb after some time

regards
paul

ebourzeix · 26th April 2007, 20:40

Quote:

I found that both of the scrubbers fit side by side into one of the smaller Pelican cases

Really good idea ! I'll convert one of my never-used 'Peli' photo case.

For only one, I also tried this tupperware box:

Quote:

Or, naturally, order to Paul or Philippe

Thanks, Jacques ! Not bad idea

but I was simply curious to know what this filter was made of (and incidentally if I could buy it in a vacuum cleaner store close to my home

).

Quote:

it's not paper :-)

I'll correct on my web site

Regards,
Eric

J. V. · 27th April 2007, 11:07

Quote:

it's not paper

Sure, but what is it exactly?

ebourzeix · 27th April 2007, 21:44

Quote:

Sure, but what is it exactly?

And other (little) question: I was wondering why filters were machined on her face like this:

Jacques told me but I've forgotten

Eric

paulraymaekers · 27th April 2007, 22:26

Quote: (Originally Posted by ebourzeix)

And other (little) question: I was wondering why filters were machined on her face like this:

Jacques told me but I've forgotten

Eric

air gap between scrubber and scrubber holder: extra isolation in very cold conditions

regards
paul

ebourzeix · 27th April 2007, 23:30

Thanks, Paul.

Eric

tassie_rohan · 3rd May 2007, 01:03

Another quick question:

The manual refers to 'extended scrubber' which gives 3 hours per canister: is this just another type or sorb (and if so why isn't used all the time), or is it a larger canister.

Cheers,
Rohan.

25th April 2007, 20:50	#1 (permalink)
ebourzeix New Member Current Rebreather/s: rEvo Other CCR RB80 / Clone Home Build Other Rebreather/s: rEvo Other CCR RB80 / Clone Home Build Join Date: Mar 2006 Location: Geneva (CH) Posts: 83	rEvo possibilities Swiss idea to keep fresh soda lime Not yet CE cheese By the way, could I find this paper-filter here in Geneva (old reflex to get some spare part) ? Regards, Eric __________________ http://plongeesanssel.com http://leman.oldiblog.com/?page=articles
(Offline)

25th April 2007, 21:25	#2 (permalink)
Dave Sutton Diveshop of Horrors Current Rebreather/s: Sport Kiss MK 15.X rEvo Other CCR Azimuth Home Build Other Rebreather/s: Classic Kiss rEvo Other CCR Azimuth Home Build Join Date: Jun 2006 Location: Narragansett, Rhode Island and Hackettstown, New Jersey Posts: 2,688	Re: rEvo possibilities Quote: (Originally Posted by ebourzeix) Swiss idea to keep fresh soda lime Eric Nice! I found that both of the scrubbers fit side by side into one of the smaller Pelican cases, the one just smaller than a briefcase. I'm planning on grabbing 2 spare scrubbers so I can keep a pair loaded for multi day trips and will carry them loaded in the Pelican case. Paul will have the fabric. Dave __________________ "Changes in Lattitudes, Changes in Attitudes, Nothing remains quite the same".... www.nobubblediving.com
(Online)

26th April 2007, 06:52	#3 (permalink)
J. V. Custom Title Allowed! Current Rebreather/s: rEvo Other Rebreather/s: Not Bought Yet rEvo Join Date: Mar 2006 Location: Lot & Savoie Posts: 239	Re: rEvo possibilities If there is an Inspiration reseller in Geneva, you can take the Inspiration paper, it's exactly the same size. Other possibility, you cut a filter in a "filtre à graisse pour hotte de cuisine". Or, naturally, order to Paul or Philippe. __________________ -------------------- Jacques NPSFQQA-EDS IT # 007 (remué non agité)
(Offline)

26th April 2007, 07:02	#4 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,498	Re: rEvo possibilities Quote: (Originally Posted by J. V.) If there is an Inspiration reseller in Geneva, you can take the Inspiration paper, it's exactly the same size. Other possibility, you cut a filter in a "filtre à graisse pour hotte de cuisine". Or, naturally, order to Paul or Philippe. it's not paper :-) and if you use the 'filtre à graisse pour hotte de cuisine', it works ok, but the filter is eaten by the sorb after some time regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Online)

26th April 2007, 20:40	#5 (permalink)
ebourzeix New Member Current Rebreather/s: rEvo Other CCR RB80 / Clone Home Build Other Rebreather/s: rEvo Other CCR RB80 / Clone Home Build Join Date: Mar 2006 Location: Geneva (CH) Posts: 83	Re: rEvo possibilities Quote: I found that both of the scrubbers fit side by side into one of the smaller Pelican cases Really good idea ! I'll convert one of my never-used 'Peli' photo case. For only one, I also tried this tupperware box: Quote: Or, naturally, order to Paul or Philippe Thanks, Jacques ! Not bad idea but I was simply curious to know what this filter was made of (and incidentally if I could buy it in a vacuum cleaner store close to my home ). Quote: it's not paper :-) I'll correct on my web site Regards, Eric __________________ http://plongeesanssel.com http://leman.oldiblog.com/?page=articles
(Offline)

27th April 2007, 11:07	#6 (permalink)
J. V. Custom Title Allowed! Current Rebreather/s: rEvo Other Rebreather/s: Not Bought Yet rEvo Join Date: Mar 2006 Location: Lot & Savoie Posts: 239	Re: rEvo possibilities Quote: it's not paper Sure, but what is it exactly? __________________ -------------------- Jacques NPSFQQA-EDS IT # 007 (remué non agité)
(Offline)

27th April 2007, 21:44	#7 (permalink)
ebourzeix New Member Current Rebreather/s: rEvo Other CCR RB80 / Clone Home Build Other Rebreather/s: rEvo Other CCR RB80 / Clone Home Build Join Date: Mar 2006 Location: Geneva (CH) Posts: 83	Re: rEvo possibilities Quote: Sure, but what is it exactly? And other (little) question: I was wondering why filters were machined on her face like this: Jacques told me but I've forgotten Eric __________________ http://plongeesanssel.com http://leman.oldiblog.com/?page=articles
(Offline)

27th April 2007, 22:26	#8 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,498	Re: rEvo possibilities Quote: (Originally Posted by ebourzeix) And other (little) question: I was wondering why filters were machined on her face like this: Jacques told me but I've forgotten Eric air gap between scrubber and scrubber holder: extra isolation in very cold conditions regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials... Last edited by paulraymaekers : 27th April 2007 at 22:29.
(Online)

27th April 2007, 23:30	#9 (permalink)
ebourzeix New Member Current Rebreather/s: rEvo Other CCR RB80 / Clone Home Build Other Rebreather/s: rEvo Other CCR RB80 / Clone Home Build Join Date: Mar 2006 Location: Geneva (CH) Posts: 83	Re: rEvo possibilities Thanks, Paul. Eric __________________ http://plongeesanssel.com http://leman.oldiblog.com/?page=articles
(Offline)

3rd May 2007, 01:03	#10 (permalink)
tassie_rohan New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Mar 2006 Location: Ulaanbataar, Mongolia Posts: 10	Re: rEvo possibilities Another quick question: The manual refers to 'extended scrubber' which gives 3 hours per canister: is this just another type or sorb (and if so why isn't used all the time), or is it a larger canister. Cheers, Rohan. __________________ Cats have nine lives, which makes them ideal for experimentation..
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.rebreatherworld.com/revo-rebreather/11492-revo-possibilities.html
Posted By	For	Type	Date
rEvo Rebreather [Archive] - Page 2 - Rebreather World	This thread	Refback	5th May 2008 11:44
rEvo Rebreather [Archive] - Rebreather World Forums	This thread	Refback	25th July 2007 08:03
rEvo possibilities - Page 2 - Rebreather World Forums	This thread	Refback	3rd May 2007 02:47