REVO and VR3

ntokyo · 3rd April 2007, 05:03

Hi,
I recently decided my first CCR will be a REVOII. I just sent the money, and have few months to kill before flying it.... I decided to plug my VR3 and Paul will install a "p-port triple entry". I guess 2 for the revodream and one for the VR3.
i would like to purchase the cable, but I am not sure about the connection type (Revo side, other side is fisher).
Can a REVO user tell me which cable is needed ? Where I can get one (I cannot see it on Delta P site) ?
A picture on the connection triple entry port would be great...
Thank you.
Cheers,
Nicolas

Stephane · 3rd April 2007, 05:37

Hello Nicolas,

Wise decision, you won't regreat your choice.
While waiting for it, you'll have plenty of time to learn how to correctly write rEvo !!!

I am sure Paul can help you with the VR3 cable, just ask him.

Mikel-Deko · 3rd April 2007, 07:34

Hi nTokyo.
We have just purchased a rEvodream from Paul.
He is a very serius person and i'm sure that he will help you with anything conciernig rEvo, rEvodream, or any cable you will need.
Talk to him.
About the Rebreather... very good choise.
Best
Mikel
rEvodream pilot in a Inspi

ntokyo · 3rd April 2007, 10:00

All my apologies for the spelling. I believe 3 months should be ok to learn about rEvo (アルエボーin Japanese).
I am certain Paul will provide me additional information on the VR3 connection.
Are you using a VR3 or something else for deco ?
Cheers,
Nicolas

Mikel-Deko · 3rd April 2007, 10:26

Hi nTokyo:
Yes, i'm using a VR3 but not connected to the inspi.
I've the classic inspi and i keept the original hansets with his 3 sensors and i add two extra sensors for the rEvodream.
I'was thinking to connect the vr3 also, actually i had the cable and fischer connector, but i decided that it was not necessary.
I supposed that 5 sensors is enaught.

But, right now, we are instaling the rEvodream in a friends Submatix.
He is going to use two sensors for the rEvodream and one else for the vr3.
We think that it is a very good solution for the Submatix.
Obiously it is also a very good solution for the rEvoII.

Enjoy your time out of the water learnig about your new toy and enjoy your time underwater without bubbles.

Best
Mikel-deko

ntokyo · 3rd April 2007, 22:44

Quote: (Originally Posted by Mikel-Deko)

Hi nTokyo:
Yes, i'm using a VR3 but not connected to the inspi.
I've the classic inspi and i keept the original hansets with his 3 sensors and i add two extra sensors for the rEvodream.
I'was thinking to connect the vr3 also, actually i had the cable and fischer connector, but i decided that it was not necessary.
I supposed that 5 sensors is enaught.

But, right now, we are instaling the rEvodream in a friends Submatix.
He is going to use two sensors for the rEvodream and one else for the vr3.
We think that it is a very good solution for the Submatix.
Obiously it is also a very good solution for the rEvoII.

Enjoy your time out of the water learnig about your new toy and enjoy your time underwater without bubbles.

Best
Mikel-deko

Thank you for the description. I want to use it in the same way than the Submatix, after I will see what to do with more experience.
Just one question: why do you use 5 sensors ? Did you experience some issues with the 3 original sensors ? It seems you do not want to rely on them...
Best Regards,
Nicolas

Mikel-Deko · 4th April 2007, 08:01

Hi Nicolas

It is because i wanted an absolutely independient measuring system.
I've even tried the inspi with the hansets off and i can dive it manually without problems.

Best
Mikel

Nad · 4th April 2007, 08:04

Quote: (Originally Posted by ntokyo)

Hi,
I recently decided my first CCR will be a REVOII. I just sent the money, and have few months to kill before flying it.... I decided to plug my VR3 and Paul will install a "p-port triple entry". I guess 2 for the revodream and one for the VR3.
i would like to purchase the cable, but I am not sure about the connection type (Revo side, other side is fisher).
Can a REVO user tell me which cable is needed ? Where I can get one (I cannot see it on Delta P site) ?
A picture on the connection triple entry port would be great...
Thank you.
Cheers,
Nicolas

Good choice.
What's about the P-Port triple entry? Where?
The rEvo usually has a row under the Inhalation CL...
If the P-Port is somewhere else you could choose the VR3 but just with Xdec function enabled, it will show the FO2, and you need the cable and a connection, depending on what Paul is mounting, eventually the Dräger Port kit.
However be aware that if you buy, say a Dräger Rebreather Interface (C8a), you still need the PIN to activate Xfunc (external connection).

I'm sure Al at Delta P will help you better.

Best and enjoy you new toy.

Nad

ntokyo · 4th April 2007, 09:13

Quote: (Originally Posted by Nad)

Good choice.
What's about the P-Port triple entry? Where?
The rEvo usually has a row under the Inhalation CL...
If the P-Port is somewhere else you could choose the VR3 but just with Xdec function enabled, it will show the FO2, and you need the cable and a connection, depending on what Paul is mounting, eventually the Dräger Port kit.
However be aware that if you buy, say a Dräger Rebreather Interface (C8a), you still need the PIN to activate Xfunc (external connection).

I'm sure Al at Delta P will help you better.

Best and enjoy you new toy.

Nad

Hi, I guess it is the standard port where is connected the revodream. A simple connection is added. But I am not sure of the format. Best is I check with Paul. What is certain it is not an additional p-port.
For the code, I will buy it on Diveriteexpress, I think I should be ok. Only the proper cable...
Thank you very much for your advice.
Cheers,
Nicolas

3rd April 2007, 05:03	#1 (permalink)
ntokyo New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Dec 2006 Location: Tokyo, Japan Posts: 90	REVO and VR3 Hi, I recently decided my first CCR will be a REVOII. I just sent the money, and have few months to kill before flying it.... I decided to plug my VR3 and Paul will install a "p-port triple entry". I guess 2 for the revodream and one for the VR3. i would like to purchase the cable, but I am not sure about the connection type (Revo side, other side is fisher). Can a REVO user tell me which cable is needed ? Where I can get one (I cannot see it on Delta P site) ? A picture on the connection triple entry port would be great... Thank you. Cheers, Nicolas
(Offline)

3rd April 2007, 05:37	#2 (permalink)
Stephane Hey! Ho! Let's go! Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Nantes - France Posts: 734	Re: REVO and VR3 Hello Nicolas, Wise decision, you won't regreat your choice. While waiting for it, you'll have plenty of time to learn how to correctly write rEvo !!! I am sure Paul can help you with the VR3 cable, just ask him. __________________ Stéphane Hammer-rEvo powered!
(Offline)

3rd April 2007, 07:34	#3 (permalink)
Mikel-Deko Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Other CCR Join Date: Jul 2005 Location: Basque Country -Sp- Posts: 418	Re: REVO and VR3 Hi nTokyo. We have just purchased a rEvodream from Paul. He is a very serius person and i'm sure that he will help you with anything conciernig rEvo, rEvodream, or any cable you will need. Talk to him. About the Rebreather... very good choise. Best Mikel rEvodream pilot in a Inspi __________________ Mikel-Deko Basque Country www.olatu.net "DIR is the nanny state for divers who cannot think on their own" Ron Micjan
(Offline)

3rd April 2007, 10:00	#4 (permalink)
ntokyo New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Dec 2006 Location: Tokyo, Japan Posts: 90	Re: REVO and VR3 All my apologies for the spelling. I believe 3 months should be ok to learn about rEvo (アルエボーin Japanese). I am certain Paul will provide me additional information on the VR3 connection. Are you using a VR3 or something else for deco ? Cheers, Nicolas
(Offline)

3rd April 2007, 10:26	#5 (permalink)
Mikel-Deko Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Other CCR Join Date: Jul 2005 Location: Basque Country -Sp- Posts: 418	Re: REVO and VR3 Hi nTokyo: Yes, i'm using a VR3 but not connected to the inspi. I've the classic inspi and i keept the original hansets with his 3 sensors and i add two extra sensors for the rEvodream. I'was thinking to connect the vr3 also, actually i had the cable and fischer connector, but i decided that it was not necessary. I supposed that 5 sensors is enaught. But, right now, we are instaling the rEvodream in a friends Submatix. He is going to use two sensors for the rEvodream and one else for the vr3. We think that it is a very good solution for the Submatix. Obiously it is also a very good solution for the rEvoII. Enjoy your time out of the water learnig about your new toy and enjoy your time underwater without bubbles. Best Mikel-deko __________________ Mikel-Deko Basque Country www.olatu.net "DIR is the nanny state for divers who cannot think on their own" Ron Micjan
(Offline)

3rd April 2007, 22:44	#6 (permalink)
ntokyo New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Dec 2006 Location: Tokyo, Japan Posts: 90	Re: REVO and VR3 Quote: (Originally Posted by Mikel-Deko) Hi nTokyo: Yes, i'm using a VR3 but not connected to the inspi. I've the classic inspi and i keept the original hansets with his 3 sensors and i add two extra sensors for the rEvodream. I'was thinking to connect the vr3 also, actually i had the cable and fischer connector, but i decided that it was not necessary. I supposed that 5 sensors is enaught. But, right now, we are instaling the rEvodream in a friends Submatix. He is going to use two sensors for the rEvodream and one else for the vr3. We think that it is a very good solution for the Submatix. Obiously it is also a very good solution for the rEvoII. Enjoy your time out of the water learnig about your new toy and enjoy your time underwater without bubbles. Best Mikel-deko Thank you for the description. I want to use it in the same way than the Submatix, after I will see what to do with more experience. Just one question: why do you use 5 sensors ? Did you experience some issues with the 3 original sensors ? It seems you do not want to rely on them... Best Regards, Nicolas
(Offline)

4th April 2007, 08:01	#7 (permalink)
Mikel-Deko Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Other CCR Join Date: Jul 2005 Location: Basque Country -Sp- Posts: 418	Re: REVO and VR3 Hi Nicolas It is because i wanted an absolutely independient measuring system. I've even tried the inspi with the hansets off and i can dive it manually without problems. Best Mikel __________________ Mikel-Deko Basque Country www.olatu.net "DIR is the nanny state for divers who cannot think on their own" Ron Micjan
(Offline)

4th April 2007, 08:04	#8 (permalink)
Nad Rebel to the Bone Current Rebreather/s: Ouroboros Other Rebreather/s: Not Bought Yet Inspiration Classic Join Date: Mar 2005 Location: Europe Posts: 960	Re: REVO and VR3 Quote: (Originally Posted by ntokyo) Hi, I recently decided my first CCR will be a REVOII. I just sent the money, and have few months to kill before flying it.... I decided to plug my VR3 and Paul will install a "p-port triple entry". I guess 2 for the revodream and one for the VR3. i would like to purchase the cable, but I am not sure about the connection type (Revo side, other side is fisher). Can a REVO user tell me which cable is needed ? Where I can get one (I cannot see it on Delta P site) ? A picture on the connection triple entry port would be great... Thank you. Cheers, Nicolas Good choice. What's about the P-Port triple entry? Where? The rEvo usually has a row under the Inhalation CL... If the P-Port is somewhere else you could choose the VR3 but just with Xdec function enabled, it will show the FO2, and you need the cable and a connection, depending on what Paul is mounting, eventually the Dräger Port kit. However be aware that if you buy, say a Dräger Rebreather Interface (C8a), you still need the PIN to activate Xfunc (external connection). I'm sure Al at Delta P will help you better. Best and enjoy you new toy. Nad __________________ The Impossible is often the Untried
(Online)

4th April 2007, 09:13	#9 (permalink)
ntokyo New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Dec 2006 Location: Tokyo, Japan Posts: 90	Re: REVO and VR3 Quote: (Originally Posted by Nad) Good choice. What's about the P-Port triple entry? Where? The rEvo usually has a row under the Inhalation CL... If the P-Port is somewhere else you could choose the VR3 but just with Xdec function enabled, it will show the FO2, and you need the cable and a connection, depending on what Paul is mounting, eventually the Dräger Port kit. However be aware that if you buy, say a Dräger Rebreather Interface (C8a), you still need the PIN to activate Xfunc (external connection). I'm sure Al at Delta P will help you better. Best and enjoy you new toy. Nad Hi, I guess it is the standard port where is connected the revodream. A simple connection is added. But I am not sure of the format. Best is I check with Paul. What is certain it is not an additional p-port. For the code, I will buy it on Diveriteexpress, I think I should be ok. Only the proper cable... Thank you very much for your advice. Cheers, Nicolas
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.rebreatherworld.com/revo-rebreather/11045-revo-and-vr3.html
Posted By	For	Type	Date
rEvo Rebreather [Archive] - Page 2 - Rebreather World	This thread	Refback	22nd February 2008 14:06
rEvo Rebreather [Archive] - Rebreather World Forums	This thread	Refback	23rd June 2007 19:51