Prism #007

**DeepBlueInnovation** · 29th March 2008, 07:58

G'day all,

I am moving to the UK shortly so I am selling my unit. The unit is one of five that were produced with a clear head to enable instructors to demonstrate the inner workings to students.

The head has two repairs where the previous owner Karl Hall did some damage, however these have been fully repaired and do not affect the operation of the unit. The unit passes all pre and post dive checks including positive and negative checks. I regularly take the unit to depths up to 65m and have had no problems (other forum members will testify to the diving history of the unit). This was the rebreather Karl used to complete his cocklebiddy push.

It will be supplied with stock mounting plate, wing and harness. In addition a stainless steel mounting plate is included for those looking to use a backplate and wing.

Photos are provided below, pm me with any queries.

Price is $5500AUD.

The only condition of sale is that the user is Prism certified, otherwise the unit will be shipped without the flapper valves and spiders which will be shipped to the Prism instructor of the buyer's choice.

***sadave*** · 29th March 2008, 08:04

I'll quite happily vouch for Ben, this is a genuine sale, from a genuine seller.

I can even say that I've done a dive with Ben, while he was diving this unit, and it worked flawlessly.

**DeepBlueInnovation** · 30th March 2008, 03:57

Photos of the unit:

IMGP2280.JPG

IMGP2285.JPG

IMGP2283.JPG

IMGP2286.JPG

IMGP2278.JPG

Please note the pictured backplate, wing, harness and knife are not included in the sale, however the original wing and harness is.

Cheers,

Ben.

Ben Field · 30th March 2008, 12:02

Why not bring it here with you? Nowhere in the UK is more than 70miles from the sea for starters!

**DeepBlueInnovation** · 30th March 2008, 15:02

Don't worry, I'm not giving up rebreathers

To be honest I am looking to move to a back mounted counterlung unit and it makes sense to offload the Prism here and buy a yet-to-be-determined-model in the UK.

It will be an interesting transition - I will have to get used to not being able to knock off work at 16:00 and go for a kitesurf! I am looking forward to the diving, there is a lot more opportunity for wreck diving than here in Aus.

Quote: (Originally Posted by Ben Field)

Why not bring it here with you? Nowhere in the UK is more than 70miles from the sea for starters!

Ben Field · 30th March 2008, 17:23

Quote: (Originally Posted by DeepBlueInnovation)

Don't worry, I'm not giving up rebreathers

To be honest I am looking to move to a back mounted counterlung unit and it makes sense to offload the Prism here and buy a yet-to-be-determined-model in the UK.

It will be an interesting transition - I will have to get used to not being able to knock off work at 16:00 and go for a kitesurf! I am looking forward to the diving, there is a lot more opportunity for wreck diving than here in Aus.

Excellent!

PM'd you regarding surfing and diving, it'll certainly be a change!

Great serial number BTW

**DeepBlueInnovation** · 7th June 2008, 09:13

Price dropped to $5000AUD

I have just serviced the unit - 02 cleaned the regs, hoses and tanks including hydro. I have also ordered three new cells.

Any questions drop me a line. Updated photos below.

Ben.

IMGP2384.JPG

IMGP2389.JPG

IMGP2406.JPG

IMGP2411.JPG

IMGP2409.JPG

29th March 2008, 07:58	#1 (permalink)
DeepBlueInnovation Prism #007 Current Rebreather/s: Prism Topaz Other Rebreather/s: Join Date: Sep 2005 Location: Perth, Western Australia Posts: 339	Prism #007 G'day all, I am moving to the UK shortly so I am selling my unit. The unit is one of five that were produced with a clear head to enable instructors to demonstrate the inner workings to students. The head has two repairs where the previous owner Karl Hall did some damage, however these have been fully repaired and do not affect the operation of the unit. The unit passes all pre and post dive checks including positive and negative checks. I regularly take the unit to depths up to 65m and have had no problems (other forum members will testify to the diving history of the unit). This was the rebreather Karl used to complete his cocklebiddy push. It will be supplied with stock mounting plate, wing and harness. In addition a stainless steel mounting plate is included for those looking to use a backplate and wing. Photos are provided below, pm me with any queries. Price is $5500AUD. The only condition of sale is that the user is Prism certified, otherwise the unit will be shipped without the flapper valves and spiders which will be shipped to the Prism instructor of the buyer's choice. Last edited by DeepBlueInnovation : 30th March 2008 at 04:00. Reason: Photos provided.
(Offline)

29th March 2008, 08:04	#2 (permalink)
*sadave* Moderator Current Rebreather/s: Sport Kiss Other Rebreather/s: Not Bought Yet Sport Kiss Classic Kiss Join Date: Jun 2005 Location: Brisbane, Queensland Posts: 1,008	Re: Prism #007 I'll quite happily vouch for Ben, this is a genuine sale, from a genuine seller. I can even say that I've done a dive with Ben, while he was diving this unit, and it worked flawlessly. __________________ Wave!
(Online)

30th March 2008, 03:57	#3 (permalink)
DeepBlueInnovation Prism #007 Current Rebreather/s: Prism Topaz Other Rebreather/s: Join Date: Sep 2005 Location: Perth, Western Australia Posts: 339	Re: Prism #007 Photos of the unit: IMGP2280.JPG IMGP2285.JPG IMGP2283.JPG IMGP2286.JPG IMGP2278.JPG Please note the pictured backplate, wing, harness and knife are not included in the sale, however the original wing and harness is. Cheers, Ben.
(Offline)

30th March 2008, 12:02	#4 (permalink)
Ben Field CK+Shearwater Current Rebreather/s: Classic Kiss Other Rebreather/s: Sport Kiss Join Date: Aug 2005 Location: London, England Posts: 1,545	Re: Prism #007 Why not bring it here with you? Nowhere in the UK is more than 70miles from the sea for starters! __________________ www.hugsac.org.uk Beware Fridge Suck
(Offline)

30th March 2008, 15:02	#5 (permalink)
DeepBlueInnovation Prism #007 Current Rebreather/s: Prism Topaz Other Rebreather/s: Join Date: Sep 2005 Location: Perth, Western Australia Posts: 339	Re: Prism #007 Don't worry, I'm not giving up rebreathers To be honest I am looking to move to a back mounted counterlung unit and it makes sense to offload the Prism here and buy a yet-to-be-determined-model in the UK. It will be an interesting transition - I will have to get used to not being able to knock off work at 16:00 and go for a kitesurf! I am looking forward to the diving, there is a lot more opportunity for wreck diving than here in Aus. Quote: (Originally Posted by Ben Field) Why not bring it here with you? Nowhere in the UK is more than 70miles from the sea for starters!
(Offline)

30th March 2008, 17:23	#6 (permalink)
Ben Field CK+Shearwater Current Rebreather/s: Classic Kiss Other Rebreather/s: Sport Kiss Join Date: Aug 2005 Location: London, England Posts: 1,545	Re: Prism #007 Quote: (Originally Posted by DeepBlueInnovation) Don't worry, I'm not giving up rebreathers To be honest I am looking to move to a back mounted counterlung unit and it makes sense to offload the Prism here and buy a yet-to-be-determined-model in the UK. It will be an interesting transition - I will have to get used to not being able to knock off work at 16:00 and go for a kitesurf! I am looking forward to the diving, there is a lot more opportunity for wreck diving than here in Aus. Excellent! PM'd you regarding surfing and diving, it'll certainly be a change! Great serial number BTW __________________ www.hugsac.org.uk Beware Fridge Suck
(Offline)

7th June 2008, 09:13	#7 (permalink)
DeepBlueInnovation Prism #007 Current Rebreather/s: Prism Topaz Other Rebreather/s: Join Date: Sep 2005 Location: Perth, Western Australia Posts: 339	Prism #007 Price dropped to $5000AUD I have just serviced the unit - 02 cleaned the regs, hoses and tanks including hydro. I have also ordered three new cells. Any questions drop me a line. Updated photos below. Ben. IMGP2384.JPG IMGP2389.JPG IMGP2406.JPG IMGP2411.JPG IMGP2409.JPG
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode