Inspiration Vision and Evolution HUD Flash Cards
By Neil Holden
After publishing a message on the
Rebreatherworld forum there was quite a bit of interest from members here to get hold of this file, so I thought it appropriate to drop it into the library.
This version is for printing on normal A4 card or paper then for cutting to size prior to lamination. However, I originally designed the size for a readily available (at least in the UK) business card A4 sheet (Office World/ STAPLES in the UK - in this case I used DECAdry – OCC 3727)
The measurements are as follows:
- Top & Bottom margin: 13.5mm
- Left & Right margin: 15.0mm
- Card width: 85.0mm
- Card height: 54.0mm
- Central margin: 10.0mm
I have included both a PDF and Word format document.
HUD Flash Cards - PDF Format HUD Flash Cards - Word Format
The conversion to PDF mucked about with the sizing slightly so this now won't work on the business cards unfortunately, hence the DIY cutting marks, but the WORD format remains unchanged (I hope).
Enjoy
Neil
Discuss this article HERE