Noob question on Vision Deco

jtresfon · 25th January 2007, 06:48

Does the Vision Deco software work out the remaining deco obligation based on the setpoint (like the VR3 not plumbed in), or does it actually use the measured PPO2 in the calculation?

01RMB · 25th January 2007, 07:10

It will work it out based on the measured PPO2.

***Beanie*** · 25th January 2007, 08:35

The look ahead will be based on the setpoint ( well I can't see what else it could be

) but it uses the actuall PPO2 to calculate the current gas loadings

If that makes any sense?

25th January 2007, 06:48	#1 (permalink)
jtresfon New Member Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Sep 2006 Location: Cape Town Posts: 23	Noob question on Vision Deco Does the Vision Deco software work out the remaining deco obligation based on the setpoint (like the VR3 not plumbed in), or does it actually use the measured PPO2 in the calculation? __________________ www.underwaterimages.co.za It's not about being down deepest or longest, it's what you do when you're down there!
(Offline)

25th January 2007, 07:10	#2 (permalink)
01RMB Evolving Current Rebreather/s: Evolution Other Rebreather/s: Join Date: May 2005 Location: Brisbane, Australia Posts: 193	Re: Noob question on Vision Deco It will work it out based on the measured PPO2. __________________ Cheers Rod
(Offline)

25th January 2007, 08:35	#3 (permalink)
*Beanie* Gallery Administrator Current Rebreather/s: Inspiration Classic Other Rebreather/s: Inspiration Vision Join Date: Jan 2005 Location: In da house! yeah baby! Posts: 3,311	Re: Noob question on Vision Deco The look ahead will be based on the setpoint ( well I can't see what else it could be ) but it uses the actuall PPO2 to calculate the current gas loadings If that makes any sense? __________________ Beanie Gallery Admin & Library Assistant. www.outlawdivers.org.uk www.beandiving.co.uk www.beanengineering.co.uk
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode