New Shearwater Website

bgpartri · 25th July 2006, 02:42

In response to many questions, I have put up a much more comprehensive website at http://www.rebreather.ca

I have included a FAQ page and will be shutting down the Yahoo site. If I get a question that appears to be of general interest, I'll put it up on the FAQ page.

I welcome opinions, comments, bug reports, etc.

JanR · 25th July 2006, 06:18

Nice work, great improvment from the old one.

/Jan

**RichClark** · 25th July 2006, 14:50

Hi Bruce,

Nice website, its a huge improvement!

When do you think you'll be able to give more information on the HUD? In the mean time, I'll just continue to check the website for details.

Cheers

Rich

Philippe GERIN · 25th July 2006, 15:01

Nicely done Bruce. I especially like the page with the alternative set-ups: a picture is worth a thousand words. Once again, it's true.
Best
Philippe

bgpartri · 25th July 2006, 15:15

Quote: (Originally Posted by RichClark)

When do you think you'll be able to give more information on the HUD? In the mean time, I'll just continue to check the website for details.

Hi Rich,

I won't really know that it's done until it's done. I thought it was done last week. We have been diving the electronics for months, and the LED holder and arm injection molded parts came in last week. But the case just wasn't right, so I'm going to have another revision done. It's usually about a 3-4 week turn around.

bgpartri · 25th July 2006, 15:17

Quote: (Originally Posted by Philippe GERIN)

Nicely done Bruce.

Thanks. I will take the compliment with a grain of salt, since anything would be an improvement over what I had before

PacketSniffer · 25th July 2006, 19:08

It nicely laid out and professional. Well done.

Richard

**RichClark** · 25th July 2006, 19:47

Quote: (Originally Posted by bgpartri)

Hi Rich,

I won't really know that it's done until it's done. I thought it was done last week. We have been diving the electronics for months, and the LED holder and arm injection molded parts came in a last week. But the case just wasn't right, so I'm going to have another revision done. It's usually about a 3-4 week turn around.

Thanks Bruce,

I'll continue to re-visit the site. I'm really looking forward to the total package.

Did Jason ever get back to you about integrating his 3 cell display as a secondary?

Cheers

Rich

decoweenie · 25th July 2006, 20:01

Quote: (Originally Posted by bgpartri)

...the LED holder...

Bruce,

If your HUD is side-view (similar to Vision instead of front view like HH), you might want to make the round housing the same dimension as the Vision HUD.

Then the diver could use 1 of the 3 APD supplied HUD holder for your HUD.

bgpartri · 25th July 2006, 20:06

Now you tell me after the molds are done

I've only had one dive on the Vision electronics, but the size seems similar. What is the OD of the holder? The Shearwater is .5" (12,75mm)

25th July 2006, 02:42	#1 (permalink)
bgpartri CEO-Shearwater Current Rebreather/s: Megalodon Other Rebreather/s: Inspiration Classic Sport Kiss Classic Kiss Titan Join Date: Apr 2005 Location: Vancouver, Canada Posts: 423	New Shearwater Website In response to many questions, I have put up a much more comprehensive website at http://www.rebreather.ca I have included a FAQ page and will be shutting down the Yahoo site. If I get a question that appears to be of general interest, I'll put it up on the FAQ page. I welcome opinions, comments, bug reports, etc. __________________ http://www.shearwaterresearch.com Good judgment comes from experience. Experience comes from bad judgment.
(Offline)

25th July 2006, 06:18	#2 (permalink)
JanR New Member Current Rebreather/s: Sport Kiss Other Rebreather/s: Join Date: Feb 2006 Location: Stockholm, Sweden Posts: 18	Re: New Shearwater Website Nice work, great improvment from the old one. /Jan
(Offline)

25th July 2006, 14:50	#3 (permalink)
RichClark Classic KISS No. 226 Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Mar 2005 Location: Hove, UK Posts: 793	Re: New Shearwater Website Hi Bruce, Nice website, its a huge improvement! When do you think you'll be able to give more information on the HUD? In the mean time, I'll just continue to check the website for details. Cheers Rich __________________ The more I learn about women, the more I want to go diving... just don't tell my wife I said that To taste something a little different, try http://www.thechillikitchen.co.uk
(Online)

25th July 2006, 15:01	#4 (permalink)
Philippe GERIN ccr apprentice Current Rebreather/s: Megalodon Classic Kiss Other Rebreather/s: Join Date: May 2005 Location: Strasbourg, France Posts: 647	Re: New Shearwater Website Nicely done Bruce. I especially like the page with the alternative set-ups: a picture is worth a thousand words. Once again, it's true. Best Philippe
(Offline)

25th July 2006, 15:15	#5 (permalink)
bgpartri CEO-Shearwater Current Rebreather/s: Megalodon Other Rebreather/s: Inspiration Classic Sport Kiss Classic Kiss Titan Join Date: Apr 2005 Location: Vancouver, Canada Posts: 423	Re: New Shearwater Website Quote: (Originally Posted by RichClark) When do you think you'll be able to give more information on the HUD? In the mean time, I'll just continue to check the website for details. Hi Rich, I won't really know that it's done until it's done. I thought it was done last week. We have been diving the electronics for months, and the LED holder and arm injection molded parts came in last week. But the case just wasn't right, so I'm going to have another revision done. It's usually about a 3-4 week turn around. __________________ http://www.shearwaterresearch.com Good judgment comes from experience. Experience comes from bad judgment. Last edited by bgpartri : 25th July 2006 at 21:17.
(Offline)

25th July 2006, 15:17	#6 (permalink)
bgpartri CEO-Shearwater Current Rebreather/s: Megalodon Other Rebreather/s: Inspiration Classic Sport Kiss Classic Kiss Titan Join Date: Apr 2005 Location: Vancouver, Canada Posts: 423	Re: New Shearwater Website Quote: (Originally Posted by Philippe GERIN) Nicely done Bruce. Thanks. I will take the compliment with a grain of salt, since anything would be an improvement over what I had before __________________ http://www.shearwaterresearch.com Good judgment comes from experience. Experience comes from bad judgment.
(Offline)

25th July 2006, 19:08	#7 (permalink)
PacketSniffer ~~~~~ #417 ~~~~~ Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Jun 2006 Location: Houston Posts: 437	Re: New Shearwater Website It nicely laid out and professional. Well done. Richard __________________ Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the gray twilight that knows not victory or defeat.
(Offline)

25th July 2006, 19:47	#8 (permalink)
RichClark Classic KISS No. 226 Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Mar 2005 Location: Hove, UK Posts: 793	Re: New Shearwater Website Quote: (Originally Posted by bgpartri) Hi Rich, I won't really know that it's done until it's done. I thought it was done last week. We have been diving the electronics for months, and the LED holder and arm injection molded parts came in a last week. But the case just wasn't right, so I'm going to have another revision done. It's usually about a 3-4 week turn around. Thanks Bruce, I'll continue to re-visit the site. I'm really looking forward to the total package. Did Jason ever get back to you about integrating his 3 cell display as a secondary? Cheers Rich __________________ The more I learn about women, the more I want to go diving... just don't tell my wife I said that To taste something a little different, try http://www.thechillikitchen.co.uk
(Online)

25th July 2006, 20:01	#9 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,487	Re: New Shearwater Website Quote: (Originally Posted by bgpartri) ...the LED holder... Bruce, If your HUD is side-view (similar to Vision instead of front view like HH), you might want to make the round housing the same dimension as the Vision HUD. Then the diver could use 1 of the 3 APD supplied HUD holder for your HUD. __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM
(Offline)

25th July 2006, 20:06	#10 (permalink)
bgpartri CEO-Shearwater Current Rebreather/s: Megalodon Other Rebreather/s: Inspiration Classic Sport Kiss Classic Kiss Titan Join Date: Apr 2005 Location: Vancouver, Canada Posts: 423	Re: New Shearwater Website Now you tell me after the molds are done I've only had one dive on the Vision electronics, but the size seems similar. What is the OD of the holder? The Shearwater is .5" (12,75mm) __________________ http://www.shearwaterresearch.com Good judgment comes from experience. Experience comes from bad judgment.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode