Any one using the rEvodream PPo2=HUD monitor?

PoseidonSv

I like to hear some opinions about this piece of engineering and how it works.

How do you have it configured?

Thanks in advance, Fredrik.

paulraymaekers

how to configure: you can ask him:
http://www.therebreathersite.nl/mccr_in_depth.htm

most rEvodreams are mounted on... rEvo's :-)

regards
paul

__________________
www.rEvo-rebreathers.com

.... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...

PoseidonSv

Looks really nice but is it possible to have it mounted on the arm instead.

I saw some picture in your gallery where the cablas came from the left side and it looked really nice.

How is if possible to change the setpoint and how is calibration done?

paulraymaekers

at the moment we don't produce the version without HUD anymore: the one with HUD is so much more fun to dive with:

either you use one rEvodream/HUD on 2 cells and a VR3 or HS on a 3th cell, in that case you fix the rEvodreamconsole on your pressure gauge (no need to look at the display all the time: the HUD gives all the info, it only serves for calibrating and once and awhile to check with your computer)

if you don't use a computer with a connected cell, then you simply use 2 rEvodreams/HUD: you simply mount the two HUD on one provided bracket (??) on your DSV, and connect 2 cells to the first and one (or if you want 2:-) cell on the second.
the displays are fixed both to your pressure gauges

better to have the least possible things on your arms, when.... eeuuhh .... working under water:-)

you can set the rEvodream so that it only displays one cell.

how to operate the rEvodream?? where can I upload a word-file??

regards

paul

__________________
www.rEvo-rebreathers.com

.... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...

graham_hk

Do you have a website? How much do these things cost?

Mikel-Deko

Hi Folks.

I've one in my Inspiration and works very well. Very easy to use and to calibrate.

I've test it to -75 mtrs and no problem.

Very nice piece of kit.

I will tried to put some pictures in a few days.

Regards

Mikel-Deko

J. V.

I use a rEvoDream with Hud since more than one year now. It's very pleasant to use, specially in poor visibility water like in alpin lakes or in caves.
The hud near the eye and a Explorer O on the wrist, it's perfect to fly my rebreather (a rEvo = a kiss like). If needed, it's always possible to look to the rEvoDream display clipped on the gauge.

__________________
--------------------
Jacques
NPSFQQA-EDS IT # 007
(remué non agité)

zèècalcoene

Hello all,

I dive the Revodream with HUD.. config= 2sensors to Revo and 1 to VR3 fitted onto mCCR Dolphin.
I mounted the display on a sm SS bracket together with VR3 and wear it on left arm.
Reason: for calibration, I remove the 3 sensor T-piece and VR3 and Display and can take it inside for cal.
Calibration and operational modes are very easily done... no switches no reed contacts... just by tapping on the outer case with yr fingers feeds you through the options..
I like it very much.. and much cheaper than other HUD systems on the market..
Look at some pictures "Ivan's mCCR Dolphin".. home builders..recent pictures

Cheers

Ivan

__________________
mCCR Dolphin Diver

caveseeker7

Link to the picture Ivan mentions.

__________________
Cheers
Stefan



"Political Correctness is a doctrine, fostered by a delusional, illogical minority,
and rabidly promoted by an unscrupulous mainstream media,
which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.!"

whaam68

To the Revodream users, is it possible to calibrate the unit, put it to "sleep" & then activate it on the boat or does it have to be calibrated at switch on every time?
Thanks
Mike