Re wiring Fischer connector

cavedave · 14th July 2008, 08:19

I have some how managed to kink the cable to my vr3 and want to cut it back and re connect.Just wondering if anyone has done this as I am not sure how to disconnect the fischer connector(7 pin).Also is it possible to re use the old connector?

Mdemon · 14th July 2008, 10:25

Here's some info for the 2 pin >>>here

The Narked@90 website has more info IIRC about pins.

divetheworld · 14th July 2008, 12:00

If its an original Delta-P or Narkedat90 cable, then the Fischer connector is also potted with a sealing compound.You might find it a bit more trouble than trimming it back. If you dont, then you need to!

**Monkey** · 14th July 2008, 21:34

Do not waste your time trying to reuse the old connector ... the potting compound has made reuse impossible..

I recomend you get the threaded locking connector from Shearwater Research.

Bruce uses a special Fischer connector that has a locking ring and I feel its a much better connector than the standard Fischer ...

Dave & Sandy · 15th July 2008, 01:04

cavedave · 16th July 2008, 10:54

Thanks for that .I tried to pull it apart yesterday ,and yes the potting compound makes it very difficult.I think I might look into the shearwater connector.

cavedave · 16th July 2008, 11:03

Hi Dave and Sandy ,great dive today .Heres to more adventures after the Thailand trip .Looking forward to some more tunes on deco though.....

14th July 2008, 08:19	#1 (permalink)
cavedave New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Oct 2006 Location: Australia Posts: 13	Re wiring Fischer connector I have some how managed to kink the cable to my vr3 and want to cut it back and re connect.Just wondering if anyone has done this as I am not sure how to disconnect the fischer connector(7 pin).Also is it possible to re use the old connector?
(Offline)

14th July 2008, 10:25	#2 (permalink)
Mdemon SiegeEngine II Current Rebreather/s: Inspiration Classic Home Build Other Rebreather/s: Inspiration Classic Home Build Join Date: Feb 2007 Location: SWUK Posts: 1,903	Re: Re wiring Fischer connector Here's some info for the 2 pin >>>here The Narked@90 website has more info IIRC about pins. __________________ www.southwestmafia.com "Once the agenda-monkeys and perfect-worlders have moved on, perhaps we can do some diving?"
(Offline)

14th July 2008, 12:00	#3 (permalink)
divetheworld Dive porn pimp Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Classic Kiss Other CCR Join Date: Mar 2005 Location: Leeds, England Posts: 1,551	Re: Re wiring Fischer connector If its an original Delta-P or Narkedat90 cable, then the Fischer connector is also potted with a sealing compound.You might find it a bit more trouble than trimming it back. If you dont, then you need to! __________________ Self praise is no reccomendation. Dont try to be a great man, just be a man and let history be the judge of you. CHECK OUT OUR INTERWEBS FOR CUSTOM REBREATHER UPGRADES *WWW.NARKEDAT90.CO.UK* *http://www.grpservices.com/pursuit/* Supporting Shearwater Research Products in Europe
(Offline)

14th July 2008, 21:34	#4 (permalink)
Monkey Supporting Member Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Dec 2006 Location: Lauderdale By The Sea Florida Posts: 388	Re: Re wiring Fischer connector Do not waste your time trying to reuse the old connector ... the potting compound has made reuse impossible.. I recomend you get the threaded locking connector from Shearwater Research. Bruce uses a special Fischer connector that has a locking ring and I feel its a much better connector than the standard Fischer ...
(Offline)

15th July 2008, 01:04	#5 (permalink)
Dave & Sandy New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Jun 2006 Location: Melbourne, Australia Posts: 98	Re: Re wiring Fischer connector __________________ Cheers, Dave & Sandy Atvar shows Dave & Sandy testing their new habitat 101 and home build RBMK69's
(Offline)

16th July 2008, 10:54	#6 (permalink)
cavedave New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Oct 2006 Location: Australia Posts: 13	Re: Re wiring Fischer connector Thanks for that .I tried to pull it apart yesterday ,and yes the potting compound makes it very difficult.I think I might look into the shearwater connector.
(Offline)

16th July 2008, 11:03	#7 (permalink)
cavedave New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Oct 2006 Location: Australia Posts: 13	Re: Re wiring Fischer connector Hi Dave and Sandy ,great dive today .Heres to more adventures after the Thailand trip .Looking forward to some more tunes on deco though.....
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode