Shearwater one-cell wireing to fisher??

johan carlsson · 5th May 2008, 05:57

The questionmark is aboute what is wrong whith this picture??
I have one cell connected (is it wired wrong??)
The tre-cell indicators blinking?
SW- Cell.JPG

Have tried to calibrate and i thaught that it would adjuste to one-cell reading on auto if onley one cell was connected? Is I wrong or are the wireing in the fischer contakt wrong?

Thanks. Johan

caver99 · 5th May 2008, 06:24

Quote: (Originally Posted by johan carlsson)

The questionmark is aboute what is wrong whith this picture??
I have one cell connected (is it wired wrong??)
The tre-cell indicators blinking?
Attachment 9274

Have tried to calibrate and i thaught that it would adjuste to one-cell reading on auto if onley one cell was connected? Is I wrong or are the wireing in the fischer contakt wrong?

Thanks. Johan

Hi Johan,
you must conect it to the "middle" cell.

I think you have a black cabel
So use GREEN for minus and GREY for positive if you connect only one cell.

Pining

Pin 1 -> grün/green/verde (Minus all sensors)
Pin 2 -> gelb/yellow/jaune
Pin 3 -> grau/grey/gris
Pin 4 -> rosa/pink

Any more questions? Hope this helps.

Cheers

Martin

johan carlsson · 5th May 2008, 07:20

Quote: (Originally Posted by caver99)

Hi Johan,
you must conect it to the "middle" cell.

I think you have a black cabel
So use GREEN for minus and GREY for positive if you connect only one cell.

Pining

Pin 1 -> grün/green/verde (Minus all sensors)
Pin 2 -> gelb/yellow/jaune
Pin 3 -> grau/grey/gris
Pin 4 -> rosa/pink

Any more questions? Hope this helps.

Cheers

Martin

Thank's Martin

I will try this and get back to you all..
Thaught it was something like this.. :-)

Happy diver.

TR300 · 5th May 2008, 17:18

Quote: (Originally Posted by johan carlsson)

Thank's Martin

I will try this and get back to you all..
Thaught it was something like this.. :-)

Happy diver.

In my mind I remember that the shearwater does not calibrate when not all 3 cells are connectect. If you use only one cell, best is to connect all 3 inlets (pins 2+3+4) together at on cell, so all three readings shows the same value. then its easy to calibrate, or wait for the SCR option (but not knowing if it works with one cell

)

regards
Holger

paulraymaekers · 5th May 2008, 21:27

Quote: (Originally Posted by TR300)

In my mind I remember that the shearwater does not calibrate when not all 3 cells are connectect. If you use only one cell, best is to connect all 3 inlets (pins 2+3+4) together at on cell, so all three readings shows the same value. then its easy to calibrate, or wait for the SCR option (but not knowing if it works with one cell

)

regards
Holger

hello Holger, the shearwater pursuit calibrates correct on one cell if you connect it to input nr 2 (the middle reading)
if done so, itwill not show the 0.00 on the left and right

regards
paul

5th May 2008, 05:57	#1 (permalink)
johan carlsson New Member Current Rebreather/s: Pelagian Other CCR Azimuth Other Rebreather/s: Not Bought Yet Pelagian Other CCR Azimuth Join Date: Dec 2005 Location: Sweden / Nynashamn Posts: 44	Shearwater one-cell wireing to fisher?? The questionmark is aboute what is wrong whith this picture?? I have one cell connected (is it wired wrong??) The tre-cell indicators blinking? SW- Cell.JPG Have tried to calibrate and i thaught that it would adjuste to one-cell reading on auto if onley one cell was connected? Is I wrong or are the wireing in the fischer contakt wrong? Thanks. Johan __________________ I'm done playing, geti'ng me a Pelagian..Payed and ordered Better to rule in hell than to serve in heven !! http://hem.bredband.net/gixxer750 http://www.dykarna.nu/?userId=3603
(Offline)

5th May 2008, 06:24	#2 (permalink)
caver99 New Member Current Rebreather/s: Other CCR Dolphin Azimuth Other SCR Home Build Other Rebreather/s: Not Bought Yet Other CCR Dolphin Azimuth Other SCR Home Build Join Date: Jul 2006 Location: Caribbean, Germany Posts: 61	Re: Shearwater one-cell wireing to fisher?? Quote: (Originally Posted by johan carlsson) The questionmark is aboute what is wrong whith this picture?? I have one cell connected (is it wired wrong??) The tre-cell indicators blinking? Attachment 9274 Have tried to calibrate and i thaught that it would adjuste to one-cell reading on auto if onley one cell was connected? Is I wrong or are the wireing in the fischer contakt wrong? Thanks. Johan Hi Johan, you must conect it to the "middle" cell. I think you have a black cabel So use GREEN for minus and GREY for positive if you connect only one cell. Pining Pin 1 -> grün/green/verde (Minus all sensors) Pin 2 -> gelb/yellow/jaune Pin 3 -> grau/grey/gris Pin 4 -> rosa/pink Any more questions? Hope this helps. Cheers Martin __________________ www.tecme.de
(Offline)

5th May 2008, 07:20	#3 (permalink)
johan carlsson New Member Current Rebreather/s: Pelagian Other CCR Azimuth Other Rebreather/s: Not Bought Yet Pelagian Other CCR Azimuth Join Date: Dec 2005 Location: Sweden / Nynashamn Posts: 44	Re: Shearwater one-cell wireing to fisher?? Quote: (Originally Posted by caver99) Hi Johan, you must conect it to the "middle" cell. I think you have a black cabel So use GREEN for minus and GREY for positive if you connect only one cell. Pining Pin 1 -> grün/green/verde (Minus all sensors) Pin 2 -> gelb/yellow/jaune Pin 3 -> grau/grey/gris Pin 4 -> rosa/pink Any more questions? Hope this helps. Cheers Martin Thank's Martin I will try this and get back to you all.. Thaught it was something like this.. :-) Happy diver. __________________ I'm done playing, geti'ng me a Pelagian..Payed and ordered Better to rule in hell than to serve in heven !! http://hem.bredband.net/gixxer750 http://www.dykarna.nu/?userId=3603
(Offline)

5th May 2008, 17:18	#4 (permalink)
TR300 Home of the TR300 Current Rebreather/s: Other CCR Dolphin Other SCR Home Build Other Rebreather/s: Not Bought Yet Other CCR Dolphin Other SCR Home Build Join Date: Jan 2005 Location: Weinheim, Germany Posts: 193	Re: Shearwater one-cell wireing to fisher?? Quote: (Originally Posted by johan carlsson) Thank's Martin I will try this and get back to you all.. Thaught it was something like this.. :-) Happy diver. In my mind I remember that the shearwater does not calibrate when not all 3 cells are connectect. If you use only one cell, best is to connect all 3 inlets (pins 2+3+4) together at on cell, so all three readings shows the same value. then its easy to calibrate, or wait for the SCR option (but not knowing if it works with one cell ) regards Holger __________________ If it makes bubbles it means its brocken Visit: www.tr300.com, Missions: www.rebreatherteam.de
(Offline)

5th May 2008, 21:27	#5 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,423	Re: Shearwater one-cell wireing to fisher?? Quote: (Originally Posted by TR300) In my mind I remember that the shearwater does not calibrate when not all 3 cells are connectect. If you use only one cell, best is to connect all 3 inlets (pins 2+3+4) together at on cell, so all three readings shows the same value. then its easy to calibrate, or wait for the SCR option (but not knowing if it works with one cell ) regards Holger hello Holger, the shearwater pursuit calibrates correct on one cell if you connect it to input nr 2 (the middle reading) if done so, itwill not show the 0.00 on the left and right regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode