pursuit deco simulation

**jmurba** · 1st April 2008, 16:15

Hi,

I an considering the purchase of a pursuit or a nitek X, don't know yet.

If I take a pursuit for example, which deco soft must I use to simulate the pursuit deco in order to check it will fit my needs ?

are we sure that every buhlman/gf's program will generate the same profile ?

regards

jean mi

Mark Chase · 1st April 2008, 16:53

Quote: (Originally Posted by jmurba)

Hi,

I an considering the purchase of a pursuit or a nitek X, don't know yet.

If I take a pursuit for example, which deco soft must I use to simulate the pursuit deco in order to check it will fit my needs ?

are we sure that every buhlman/gf's program will generate the same profile ?

regards

jean mi

I use Deco planner because I only ever plan OC bailout I don't pre plan the CCR dive.

I have been thinking about getting a GF CCR program. I believe nautilus do it but I tried the free down load and I couldn't test out any trimix CCR profiles against known dives so i am not too sure

With deco planner you have to sort out ascent and decent rates and which model your using to get a close match with the Shearwater.

ATB

Mark

jkaterenchuk · 1st April 2008, 17:30

You might also want to look at ANDI GAP...

The main features are:

• GAP has both the RGBM and the Bühlmann decompression models.
• GAP can show decompression schedules from both models graphically in the profile window simultaneously.
• GAP supports dives with open circuit and constant PPO2.
• GAP supports custom nitrox and trimix mixes and will suggest optimal mixes for a given dive.
• GAP supports metric and imperial units.
• GAP supports multiple gas switches during the dive and decompression.
• GAP utilises templates for personalised settings.
• GAP generates extensive reports about the dive, including decompression, oxygen tracking, END and gas consumption.
• GAP easily generates bailout tables.
• GAP has a table expert which allows you quickly to generate square profiles for many dive depths/durations at the same time.
• GAP has a gas mixer tool that uses partial pressure blending.
• GAP can output the information to paper or in HTML or CSV files.

Ben Field · 1st April 2008, 19:02

DDPlan Old school deco, nice html output for making tables though.

gerstl_ossi · 1st April 2008, 19:18

GAP, also the older freeware, has GF, so work fine together with shearwater
GAP-Software

Cheers Ossi

kiwi_diver · 1st April 2008, 19:24

Hi Jean Mi,

I'm using FreePlanner http://www.freeplanner.org to cut tables as a backup to my Pursuit. FreePlanner does Buhlmann with GF.

seppu · 1st April 2008, 20:39

j-plan works perfekt with oc-ccr.i use j-plan with my palm livedrive.

**jmurba** · 1st April 2008, 21:21

hi lads
thanks so mutch for info
regards
jean mi

JS1scuba · 1st April 2008, 21:46

Quote: (Originally Posted by Mark Chase)

I use Deco planner because I only ever plan OC bailout I don't pre plan the CCR dive.

I have been thinking about getting a GF CCR program. I believe nautilus do it but I tried the free down load and I couldn't test out any trimix CCR profiles against known dives so i am not too sure

With deco planner you have to sort out ascent and decent rates and which model your using to get a close match with the Shearwater.

ATB

Mark

Mark, go here and register for a demo version and we will send you download and activation codes.

Nautilus will allow you to run Buhlman with GF in CCR mode and switch to OC bail out ..... simple and easy.

Cheers

JDS

Blomman · 1st April 2008, 22:18

You can also take a look at MVPlan (freeware). MV-Plan the Java Dive Planner

// Blomman

1st April 2008, 16:15	#1 (permalink)
jmurba wet bear Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: May 2006 Location: cannes france Posts: 919	pursuit deco simulation Hi, I an considering the purchase of a pursuit or a nitek X, don't know yet. If I take a pursuit for example, which deco soft must I use to simulate the pursuit deco in order to check it will fit my needs ? are we sure that every buhlman/gf's program will generate the same profile ? regards jean mi __________________ when will I be able to think about something else then spending hours underwater, when will I be normal ? http://web.mac.com/jmurba/Site_2/home.html http://web.mac.com/jmurba/Site_3/home.html
(Online)

1st April 2008, 16:53	#2 (permalink)
Mark Chase RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Jan 2005 Location: Kent Posts: 2,854	Re: pursuit deco simulation Quote: (Originally Posted by jmurba) Hi, I an considering the purchase of a pursuit or a nitek X, don't know yet. If I take a pursuit for example, which deco soft must I use to simulate the pursuit deco in order to check it will fit my needs ? are we sure that every buhlman/gf's program will generate the same profile ? regards jean mi I use Deco planner because I only ever plan OC bailout I don't pre plan the CCR dive. I have been thinking about getting a GF CCR program. I believe nautilus do it but I tried the free down load and I couldn't test out any trimix CCR profiles against known dives so i am not too sure With deco planner you have to sort out ascent and decent rates and which model your using to get a close match with the Shearwater. ATB Mark __________________ See my "Doing It Chasey" video where I'm locked into a padded room, naked, with two ball bearings and within an Hour, I manage to lose one and break the other!!! Kevin Juergensen 16/11/08 [/quote]
(Offline)

1st April 2008, 17:30	#3 (permalink)
jkaterenchuk . Current Rebreather/s: Inspiration Classic Megalodon Classic Kiss Other Rebreather/s: Join Date: May 2006 Location: Lititz, PA Posts: 1,086	Re: pursuit deco simulation You might also want to look at ANDI GAP... The main features are: • GAP has both the RGBM and the Bühlmann decompression models. • GAP can show decompression schedules from both models graphically in the profile window simultaneously. • GAP supports dives with open circuit and constant PPO2. • GAP supports custom nitrox and trimix mixes and will suggest optimal mixes for a given dive. • GAP supports metric and imperial units. • GAP supports multiple gas switches during the dive and decompression. • GAP utilises templates for personalised settings. • GAP generates extensive reports about the dive, including decompression, oxygen tracking, END and gas consumption. • GAP easily generates bailout tables. • GAP has a table expert which allows you quickly to generate square profiles for many dive depths/durations at the same time. • GAP has a gas mixer tool that uses partial pressure blending. • GAP can output the information to paper or in HTML or CSV files.
(Offline)

1st April 2008, 19:02	#4 (permalink)
Ben Field CK+Shearwater Current Rebreather/s: Classic Kiss Other Rebreather/s: Sport Kiss Join Date: Aug 2005 Location: London, England Posts: 1,774	Re: pursuit deco simulation DDPlan Old school deco, nice html output for making tables though. __________________ Know your PPO2, Pre-breath, Use checklists, Validate cells at 6mtrs, Use pure O2 at or near surface, Use a BOV, Don't dive Solo, Change Slime and Cells as recommended by Manufacturer and RTFM! Beware Fridge Suck! www.hugsac.org.uk
(Online)

1st April 2008, 19:18	#5 (permalink)
gerstl_ossi RBW Member Current Rebreather/s: RB80 / Clone Home Build Other Rebreather/s: Not Bought Yet RB80 / Clone Home Build Join Date: Dec 2006 Location: Italy Posts: 345	Re: pursuit deco simulation GAP, also the older freeware, has GF, so work fine together with shearwater GAP-Software Cheers Ossi
(Offline)

1st April 2008, 19:24	#6 (permalink)
kiwi_diver Alias - Ray Mansell Current Rebreather/s: Other SCR Other Rebreather/s: Other SCR Join Date: Aug 2007 Location: Auckland, New Zealand Posts: 157	Re: pursuit deco simulation Hi Jean Mi, I'm using FreePlanner http://www.freeplanner.org to cut tables as a backup to my Pursuit. FreePlanner does Buhlmann with GF. __________________ Ray. == Latitude 36 South, where the deeper you dive, the warmer it gets! == Last edited by kiwi_diver : 1st April 2008 at 19:26.
(Offline)

1st April 2008, 20:39	#7 (permalink)
seppu i ko nix dafüa Current Rebreather/s: Other CCR Home Build Other Rebreather/s: Inspiration Classic Other CCR Home Build Join Date: Feb 2006 Location: bayern Posts: 204	Re: pursuit deco simulation j-plan works perfekt with oc-ccr.i use j-plan with my palm livedrive.
(Offline)

1st April 2008, 21:21	#8 (permalink)
jmurba wet bear Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: May 2006 Location: cannes france Posts: 919	Re: pursuit deco simulation hi lads thanks so mutch for info regards jean mi __________________ when will I be able to think about something else then spending hours underwater, when will I be normal ? http://web.mac.com/jmurba/Site_2/home.html http://web.mac.com/jmurba/Site_3/home.html
(Online)

1st April 2008, 21:46	#9 (permalink)
JS1scuba RebreatherWorld Sponsor Current Rebreather/s: Sport Kiss Classic Kiss Other Rebreather/s: Inspiration Classic Inspiration Vision Evolution Sport Kiss Classic Kiss MK 15.X Join Date: Oct 2005 Location: Lake Havasu City, AZ - USA Posts: 594	Re: pursuit deco simulation Quote: (Originally Posted by Mark Chase) I use Deco planner because I only ever plan OC bailout I don't pre plan the CCR dive. I have been thinking about getting a GF CCR program. I believe nautilus do it but I tried the free down load and I couldn't test out any trimix CCR profiles against known dives so i am not too sure With deco planner you have to sort out ascent and decent rates and which model your using to get a close match with the Shearwater. ATB Mark Mark, go here and register for a demo version and we will send you download and activation codes. Nautilus will allow you to run Buhlman with GF in CCR mode and switch to OC bail out ..... simple and easy. Cheers JDS __________________ Joel Silverstein, VP COO Tech Diving Limited a Division of Scuba Training and Technology Inc. http://www.nautilusdiveplanner.com
(Offline)

1st April 2008, 22:18	#10 (permalink)
Blomman Helium is addictive! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Jan 2006 Location: Sweden Posts: 153	Re: pursuit deco simulation You can also take a look at MVPlan (freeware). MV-Plan the Java Dive Planner // Blomman
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode