Shearwater Pursuit

divetheworld · 18th April 2008, 20:59

Version 31 had a factory prompt turned on that shouldn’t be on in production versions.

The updates to date have the following enhancements;

1. Bug fix. Occasional watchdog resets when the computer has been off for a few days
2. Bug fix. Log problems, some computers did not store logs correctly.
3. Bug fix. Occasional double button pushes that sometimes happen due to peizo button sensitivity.
4. Bug fix. Reset when in standby mode fixed.
5. Enhancement. Auto backlight thresholds changed.
6. Enhancement. Load upgrade more user friendly.

This is a list that does not include proprietory enhancements for controllers supplied to OEM manufacturers. Most of the updates released are for our benefit (controller users) rather than Pursuit owners.
Each time you see an update, it may be to incorporate a change for our controller such as a splash screen or additional menu functions rather than bug fixes. A lot goes on behind the scenes, we try to keep Bruce busy because we know if we dont, he will only go and enjoy himself doing something like diving.....

Brent

Francisco · 18th April 2008, 21:02

Hello,

Do you know why when I update the 32 version the computer indicate version 31

Francisco · 18th April 2008, 22:18

Hello,

I have the response, thanks to Bruce.

"When you load Version 32, it still shows 31 because I didn’t change the number. As long as you get the “Update reset” message, the update is done."

Thanks all for your help

alexp200c · 19th April 2008, 17:37

After upgrade from 28 to 32 I cannot upload my logs to PC.. it shows that device GenericIRDAzzzzz found... Aligning ports and this is it - nothing else. I have re-downloaded new 32 version- still the same..

divetheworld · 19th April 2008, 19:26

Quote: (Originally Posted by alexp200c)

After upgrade from 28 to 32 I cannot upload my logs to PC.. it shows that device GenericIRDAzzzzz found... Aligning ports and this is it - nothing else. I have re-downloaded new 32 version- still the same..

Glad I could sort it out for you. Any more probs, just give me a shout.

Brent

bgpartri · 19th April 2008, 19:42

I should mention that the fix for the logs won't kick in until a log record is written to a new sector on the flash. The bug was related to the log flash erase-before-write routine.

In other words, it make take up to 45 minutes of diving before a start-dive record will actually work.

This bug happened after we were forced to change from an EEPROM to a Flash due to a part going end-of-life. They were supposed to be driver compatible, but actually weren't.

Bruce

Francisco · 25th June 2008, 22:33

hello,

When I dive to 71.2 m with my aladin tec 2g, (aladin tec 2 g may be calibrated in freshwater).

My Shearwater Pursuit indicate 68m

Can you tell me why this difference.

cameron · 26th June 2008, 02:34

I haven't had that sort of error on my pursuit, but i have found it to be about 3-4 feet shallower then my uwatec BTs when diving in the 180 foot range.

Cam

cramerdn · 26th June 2008, 05:21

Quote: (Originally Posted by cameron)

I haven't had that sort of error on my pursuit, but i have found it to be about 3-4 feet shallower then my uwatec BTs when diving in the 180 foot range.

Cam

Uwatec BTs are all calibrated for fresh water. Not sure if that helps.

Francisco · 26th June 2008, 08:59

Hello Is there anyone who knows if the Pursuit is calibrated on freshwater and saltwater?

The difference with the tec 2g on my computer is 3,2 m ( 10.5 ft) for 68m (222 ft)
= 4.7% is the difference

With the uwatec tec 2 g, you can choice fresh or salt water in the menu.

18th April 2008, 20:59	#41 (permalink)
divetheworld Dive porn pimp Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Classic Kiss Other CCR Join Date: Mar 2005 Location: Leeds, England Posts: 1,562	Re: Shearwater Pursuit Version 31 had a factory prompt turned on that shouldn’t be on in production versions. The updates to date have the following enhancements; 1. Bug fix. Occasional watchdog resets when the computer has been off for a few days 2. Bug fix. Log problems, some computers did not store logs correctly. 3. Bug fix. Occasional double button pushes that sometimes happen due to peizo button sensitivity. 4. Bug fix. Reset when in standby mode fixed. 5. Enhancement. Auto backlight thresholds changed. 6. Enhancement. Load upgrade more user friendly. This is a list that does not include proprietory enhancements for controllers supplied to OEM manufacturers. Most of the updates released are for our benefit (controller users) rather than Pursuit owners. Each time you see an update, it may be to incorporate a change for our controller such as a splash screen or additional menu functions rather than bug fixes. A lot goes on behind the scenes, we try to keep Bruce busy because we know if we dont, he will only go and enjoy himself doing something like diving..... Brent __________________ Attitude and self praise is no reccomendation. Dont try to be a great man, just be a man and let history be the judge of you. CHECK OUT OUR INTERWEBS FOR CUSTOM REBREATHER UPGRADES *WWW.NARKEDAT90.CO.UK* *http://www.grpservices.com/pursuit/* Supporting Shearwater Research Products in Europe
(Offline)

18th April 2008, 21:02	#42 (permalink)
Francisco New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Jan 2008 Location: Geneva Posts: 15	Re: Shearwater Pursuit Hello, Do you know why when I update the 32 version the computer indicate version 31
(Offline)

18th April 2008, 22:18	#43 (permalink)
Francisco New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Jan 2008 Location: Geneva Posts: 15	Re: Shearwater Pursuit Hello, I have the response, thanks to Bruce. "When you load Version 32, it still shows 31 because I didn’t change the number. As long as you get the “Update reset” message, the update is done." Thanks all for your help
(Offline)

19th April 2008, 17:37	#44 (permalink)
alexp200c New Member Current Rebreather/s: Sport Kiss Other Rebreather/s: Join Date: Oct 2005 Location: cyprus Posts: 2	Re: Shearwater Pursuit After upgrade from 28 to 32 I cannot upload my logs to PC.. it shows that device GenericIRDAzzzzz found... Aligning ports and this is it - nothing else. I have re-downloaded new 32 version- still the same..
(Offline)

19th April 2008, 19:26	#45 (permalink)
divetheworld Dive porn pimp Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Classic Kiss Other CCR Join Date: Mar 2005 Location: Leeds, England Posts: 1,562	Re: Shearwater Pursuit Quote: (Originally Posted by alexp200c) After upgrade from 28 to 32 I cannot upload my logs to PC.. it shows that device GenericIRDAzzzzz found... Aligning ports and this is it - nothing else. I have re-downloaded new 32 version- still the same.. Glad I could sort it out for you. Any more probs, just give me a shout. Brent __________________ Attitude and self praise is no reccomendation. Dont try to be a great man, just be a man and let history be the judge of you. CHECK OUT OUR INTERWEBS FOR CUSTOM REBREATHER UPGRADES *WWW.NARKEDAT90.CO.UK* *http://www.grpservices.com/pursuit/* Supporting Shearwater Research Products in Europe
(Offline)

19th April 2008, 19:42	#46 (permalink)
bgpartri Rebreather Zealot Current Rebreather/s: Megalodon Other Rebreather/s: Inspiration Classic Sport Kiss Classic Kiss Titan Join Date: Apr 2005 Location: Vancouver, Canada Posts: 394	Re: Shearwater Pursuit I should mention that the fix for the logs won't kick in until a log record is written to a new sector on the flash. The bug was related to the log flash erase-before-write routine. In other words, it make take up to 45 minutes of diving before a start-dive record will actually work. This bug happened after we were forced to change from an EEPROM to a Flash due to a part going end-of-life. They were supposed to be driver compatible, but actually weren't. Bruce __________________ http://www.rebreather.ca Good judgement comes from experience, and experience comes from bad judgement. Last edited by bgpartri : 19th April 2008 at 19:44.
(Offline)

25th June 2008, 22:33	#47 (permalink)
Francisco New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Jan 2008 Location: Geneva Posts: 15	Re: Shearwater Pursuit hello, When I dive to 71.2 m with my aladin tec 2g, (aladin tec 2 g may be calibrated in freshwater). My Shearwater Pursuit indicate 68m Can you tell me why this difference.
(Offline)

26th June 2008, 02:34	#48 (permalink)
cameron Classic Kiss 124 Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Apr 2005 Location: Toronto, Ontario, Canada Posts: 247	Re: Shearwater Pursuit I haven't had that sort of error on my pursuit, but i have found it to be about 3-4 feet shallower then my uwatec BTs when diving in the 180 foot range. Cam __________________ Reclaim at work and CCR at home, life is good
(Online)

26th June 2008, 05:21	#49 (permalink)
cramerdn Obey my dog! Current Rebreather/s: Evolution Dolphin Other Rebreather/s: Dolphin Join Date: Dec 2006 Location: Townsville QLD Posts: 534	Re: Shearwater Pursuit Quote: (Originally Posted by cameron) I haven't had that sort of error on my pursuit, but i have found it to be about 3-4 feet shallower then my uwatec BTs when diving in the 180 foot range. Cam Uwatec BTs are all calibrated for fresh water. Not sure if that helps. __________________ "Its better to live one day as a tiger than an entire life as a worm." "But who's ever heard of a worm skin rug?"
(Offline)

26th June 2008, 08:59	#50 (permalink)
Francisco New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Jan 2008 Location: Geneva Posts: 15	Re: Shearwater Pursuit Hello Is there anyone who knows if the Pursuit is calibrated on freshwater and saltwater? The difference with the tec 2g on my computer is 3,2 m ( 10.5 ft) for 68m (222 ft) = 4.7% is the difference With the uwatec tec 2 g, you can choice fresh or salt water in the menu. Last edited by Francisco : 26th June 2008 at 09:01.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode