which pp02 display !

deepnark · 22nd January 2008, 07:45

ok ive just supa glued my ck display back together for the last (fith)time,after the end display keeps trying to escape from the rest of its friends,due to the weak design style.
I have looked at the c2 display, but i am not really that keen on pendent style displays having had a classic inspro. before and found that they were not always that easy to see on penetration dives when there is not a lot of room. It seems that the Shearwater display is coming out tops at the moment,as i have heard some good feed back on its reliabilaty and design, But i am sure there must be others to choose from. I would appreciate any comments on the displays you guys use and why
thanks in advance
Ray

***caveseeker7*** · 22nd January 2008, 07:59

Money no object, my first choice would be the Shearwater Pursuit with the Shearwater HUD for independent redundancy. I've seen it, know some people who dive it and know Bruce. Good product and good customer service. The wrist unit is also available without deco, which can be added later.

Other options are the Hammerhead secondary/DIVA HUD combo from Juergensen and the URM with HUD (without the pendent display) from DeltaP. Neither of those would offer independent redundancy as the HUDs are just repeat displays.

Without integrated deco, just as a pO2 display, the Sub Sea Systems from Australia looks well made. Can be wrist-mounted, either left or right side so you can get two for independent redundancy, and a status HUD is also available. Haven't seen it yet, but looks good. So is the feedback from people using them on their Jetsam and Colkan CCRs.

Don't know if other pO2 displays are set up for wrist-mounting.

Mark Chase · 22nd January 2008, 08:38

Persuit hard wired in with HUD for redundancy.

It just works.

ATB

Mark

Andy Del · 22nd January 2008, 08:56

Subsea display is another plug 'n' play option. I just plugged it in, complete with a new kidney and went diving. The calibration menu is simple and intuitive and much fast than the KISS triple displays. If you opt for a HUD, it's a simple geen is good red is check you display system that needs no explanation.

You can also get a cable to hardwire in a VR$ or Shearwater, etc.

Dutchy · 22nd January 2008, 12:37

Persuit PPO2 display (without deco) is another option.
+ no need to open for calibration
- Unknown quantity when considering independancy of 3 channels

Mark Munro displays (either built yourself or ready made by Martin from Tecme.de)
+ single displays for combination with e.g. VR3 or HUD
+ tripple displays with mostly separate electronics. (although in one housing 1 battery)
- open to calibrate

I opted to use persuit ppo2 display WITH a single KISS display because I don't completely trust peruit.

jaap · 22nd January 2008, 13:06

Quote: (Originally Posted by caveseeker7)

Don't know if other pO2 displays are set up for wrist-mounting.

If someone would feel like it I'm pretty sure the current rEvodream displays can be used on the wrist if one opens it up, rotates the inner parts by 90° and then add some kind of home made wrist strap by the gauge mounting holes on it.

cameron · 22nd January 2008, 13:25

Quote: (Originally Posted by Andy Del)

Subsea display is another plug 'n' play option. I just plugged it in, complete with a new kidney and went diving. The calibration menu is simple and intuitive and much fast than the KISS triple displays. If you opt for a HUD, it's a simple geen is good red is check you display system that needs no explanation.

Too bad it is so damb hard to get hold of Jason to order his product...

Cam

paulraymaekers · 22nd January 2008, 15:09

Quote: (Originally Posted by jaap)

If someone would feel like it I'm pretty sure the current rEvodream displays can be used on the wrist if one opens it up, rotates the inner parts by 90° and then add some kind of home made wrist strap by the gauge mounting holes on it.

correct: the inner part can be rotated 90° so that you can read it with the cables going out on the side

regards

paul

CCR-Wrecker · 22nd January 2008, 19:01

Don't forget about Sartek. With the dollar being as weak as it is, this would appear to be a steal.

Andy

***caveseeker7*** · 22nd January 2008, 20:53

Are the Sartek displays set up for wrist-mounting?
The OP said clipping the display off was not a consideration.

22nd January 2008, 07:45	#1 (permalink)
deepnark RBW Member Current Rebreather/s: Inspiration Classic Classic Kiss Other Rebreather/s: Inspiration Classic Sport Kiss Classic Kiss Join Date: Dec 2005 Location: norfolk uk Posts: 182	which pp02 display ! ok ive just supa glued my ck display back together for the last (fith)time,after the end display keeps trying to escape from the rest of its friends,due to the weak design style. I have looked at the c2 display, but i am not really that keen on pendent style displays having had a classic inspro. before and found that they were not always that easy to see on penetration dives when there is not a lot of room. It seems that the Shearwater display is coming out tops at the moment,as i have heard some good feed back on its reliabilaty and design, But i am sure there must be others to choose from. I would appreciate any comments on the displays you guys use and why thanks in advance Ray __________________ *KISS CCR INSTRUCTOR* Today is a gd day to dive Abyss Diver Training
(Offline)

22nd January 2008, 07:59	#2 (permalink)
*caveseeker7* Who loves ya, baby Current Rebreather/s: Sport Kiss Other Rebreather/s: Prism Topaz Join Date: Jan 2005 Location: Too far from Neverland Posts: 5,555	Re: which pp02 display ! Money no object, my first choice would be the Shearwater Pursuit with the Shearwater HUD for independent redundancy. I've seen it, know some people who dive it and know Bruce. Good product and good customer service. The wrist unit is also available without deco, which can be added later. Other options are the Hammerhead secondary/DIVA HUD combo from Juergensen and the URM with HUD (without the pendent display) from DeltaP. Neither of those would offer independent redundancy as the HUDs are just repeat displays. Without integrated deco, just as a pO2 display, the Sub Sea Systems from Australia looks well made. Can be wrist-mounted, either left or right side so you can get two for independent redundancy, and a status HUD is also available. Haven't seen it yet, but looks good. So is the feedback from people using them on their Jetsam and Colkan CCRs. Don't know if other pO2 displays are set up for wrist-mounting. __________________ Cheers Stefan "Political Correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.!"
(Offline)

22nd January 2008, 08:38	#3 (permalink)
Mark Chase RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Jan 2005 Location: Kent Posts: 2,854	Re: which pp02 display ! Persuit hard wired in with HUD for redundancy. It just works. ATB Mark __________________ See my "Doing It Chasey" video where I'm locked into a padded room, naked, with two ball bearings and within an Hour, I manage to lose one and break the other!!! Kevin Juergensen 16/11/08 [/quote]
(Offline)

22nd January 2008, 08:56	#4 (permalink)
Andy Del Classic KISSer Current Rebreather/s: Sport Kiss Classic Kiss Other Rebreather/s: Join Date: Feb 2005 Location: Australia, Sunny Sydney Posts: 437	Re: which pp02 display ! Subsea display is another plug 'n' play option. I just plugged it in, complete with a new kidney and went diving. The calibration menu is simple and intuitive and much fast than the KISS triple displays. If you opt for a HUD, it's a simple geen is good red is check you display system that needs no explanation. You can also get a cable to hardwire in a VR$ or Shearwater, etc. __________________ Yellow - the colour of greatness!
(Offline)

22nd January 2008, 12:37	#5 (permalink)
Dutchy Rene Warries Current Rebreather/s: Sport Kiss Other Rebreather/s: Join Date: Apr 2006 Location: Nieuwegein (The Netherlands) Posts: 843	Re: which pp02 display ! Persuit PPO2 display (without deco) is another option. + no need to open for calibration - Unknown quantity when considering independancy of 3 channels Mark Munro displays (either built yourself or ready made by Martin from Tecme.de) + single displays for combination with e.g. VR3 or HUD + tripple displays with mostly separate electronics. (although in one housing 1 battery) - open to calibrate I opted to use persuit ppo2 display WITH a single KISS display because I don't completely trust peruit. __________________ = This post is environmentally friendly. It is composed of 100% recycled electrons only. =
(Online)

22nd January 2008, 13:06	#6 (permalink)
jaap Normal people worry me Current Rebreather/s: Classic Kiss Other CCR RB80 / Clone Ray Other SCR Home Build Other Rebreather/s: Other CCR RB80 / Clone Ray Other SCR Home Build Join Date: Jun 2005 Location: Stockholm Sweden Posts: 472	Re: which pp02 display ! Quote: (Originally Posted by caveseeker7) Don't know if other pO2 displays are set up for wrist-mounting. If someone would feel like it I'm pretty sure the current rEvodream displays can be used on the wrist if one opens it up, rotates the inner parts by 90° and then add some kind of home made wrist strap by the gauge mounting holes on it. __________________ My initials: JAAP
(Online)

22nd January 2008, 13:25	#7 (permalink)
cameron RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Apr 2005 Location: Toronto, Ontario, Canada Posts: 262	Re: which pp02 display ! Quote: (Originally Posted by Andy Del) Subsea display is another plug 'n' play option. I just plugged it in, complete with a new kidney and went diving. The calibration menu is simple and intuitive and much fast than the KISS triple displays. If you opt for a HUD, it's a simple geen is good red is check you display system that needs no explanation. Too bad it is so damb hard to get hold of Jason to order his product... Cam __________________ Reclaim at work and CCR at home, life is good
(Offline)

22nd January 2008, 15:09	#8 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,637	Re: which pp02 display ! Quote: (Originally Posted by jaap) If someone would feel like it I'm pretty sure the current rEvodream displays can be used on the wrist if one opens it up, rotates the inner parts by 90° and then add some kind of home made wrist strap by the gauge mounting holes on it. correct: the inner part can be rotated 90° so that you can read it with the cables going out on the side regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Online)

22nd January 2008, 19:01	#9 (permalink)
CCR-Wrecker aka NY-Andy Current Rebreather/s: Inspiration Classic Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Apr 2005 Location: New York Posts: 228	Re: which pp02 display ! Don't forget about Sartek. With the dollar being as weak as it is, this would appear to be a steal. Andy __________________ "I know what you'll find, it's in your mind, it's what you want to see..." Ozzy
(Offline)

22nd January 2008, 20:53	#10 (permalink)
*caveseeker7* Who loves ya, baby Current Rebreather/s: Sport Kiss Other Rebreather/s: Prism Topaz Join Date: Jan 2005 Location: Too far from Neverland Posts: 5,555	Re: which pp02 display ! Are the Sartek displays set up for wrist-mounting? The OP said clipping the display off was not a consideration. __________________ Cheers Stefan "Political Correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.!"
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode