Help! Broken 7 Pin Fisher Connector

caver99 · 16th February 2008, 20:17

Quote: (Originally Posted by abowie)

http://www.rebreatherworld.com/kiss-...html#post25656

this is the normal, original nomenclature from Fischer, it says PIN one is the center PIN 1 ( not 7)
(see the pic here)

So the center PIN 1
if the half moon is on left side, PIN two is on TOP
Right of this is PIn three

VR3 is using 1 (minus) and 3 (plus)

Shearwater
Pin 1 all minus
2,3,4 plus each sensor

Cheers
Martin

narked at 90 · 16th February 2008, 22:50

Martin is correct the pin numbers are incorrect so the connections on my website are right but the numbering is wrong... i have know this for a wile just havent got around to changing the numbering

the below picture shows the pin outs for vr3 and shearwater with colour coding for the wires i use,
this is from fischer and is fully correct
kind regards john routley

Quote: (Originally Posted by caver99)

this is the normal, original nomenclature from Fischer, it says PIN one is the center PIN 1 ( not 7)
(see the pic here)

So the center PIN 1
if the half moon is on left side, PIN two is on TOP
Right of this is PIn three

VR3 is using 1 (minus) and 3 (plus)

Shearwater
Pin 1 all minus
2,3,4 plus each sensor

Cheers
Martin

Craig69 · 18th February 2008, 12:10

Quote: (Originally Posted by tibby)

First, I just learned something from your thread, thank you. Second, I'm almost afraid to ask but I have to, what on earth is a "hamfisted git"?
Tibby

Errr, I guess the best way of explaining it is that where some people would use tweezers and lots of care I have a tendancy to use a large hammer and make a lot of noise.

tibby · 18th February 2008, 13:55

Quote: (Originally Posted by Craig69)

Errr, I guess the best way of explaining it is that where some people would use tweezers and lots of care I have a tendancy to use a large hammer and make a lot of noise.

Just learned some more...man I like this site!
Thanks
Tibby

18th February 2008, 12:10	#13 (permalink)
Craig69 Custom Title Allowed! Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Jun 2005 Location: Barnsley, South Yorkshire (Gods Own County), England. Posts: 123	Re: Help! Broken 7 Pin Fisher Connector Quote: (Originally Posted by tibby) First, I just learned something from your thread, thank you. Second, I'm almost afraid to ask but I have to, what on earth is a "hamfisted git"? Tibby Errr, I guess the best way of explaining it is that where some people would use tweezers and lots of care I have a tendancy to use a large hammer and make a lot of noise. __________________ Craig. www.thornebsac.co.uk
(Offline)

18th February 2008, 13:55	#14 (permalink)
tibby untitled Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: May 2007 Location: Salt Lake City, UT Posts: 342	Re: Help! Broken 7 Pin Fisher Connector Quote: (Originally Posted by Craig69) Errr, I guess the best way of explaining it is that where some people would use tweezers and lots of care I have a tendancy to use a large hammer and make a lot of noise. Just learned some more...man I like this site! Thanks Tibby __________________ Does the voice of reason change when you add helium to the mix?...hmm
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode