vibration alarm

paulraymaekers · 18th April 2008, 08:33

hello all, just a small question:

is the use of vibration alarms limited by patents, and if so, in what way?

regards

paul

***jradomski*** · 18th April 2008, 11:36

Quote: (Originally Posted by paulraymaekers)

hello all, just a small question:

is the use of vibration alarms limited by patents, and if so, in what way?

regards

paul

Juergensen marine has a patent on one, CCR research and Cis lunar (I believe) are licensees...

heyydude · 18th April 2008, 12:13

Joe,

That is correct.

Paul - contact me directly and we'll talk.

Kevin.

divetheworld · 18th April 2008, 12:18

If compliance with 5.9.1 is your goal in this, then we do have a spare output on the board which can be used for an alarm output. A suitable resistor and driver is all that would be required. The output would be limited to a critical alarm only though to marry up with other customers requirements. For integration into a tactile alarm you would be well advised to speak directly to Kevin.
You could integrate such an annunciator into the handset as there is room, but that design would still fall under Kevins intellectual property and it is only right he should benifit.

Brent

p.s.
Appologies to Kevin. Post edited.

paulraymaekers · 18th April 2008, 13:23

Quote: (Originally Posted by divetheworld)

If compliance with 5.9.1 is your goal in this, then we do have a spare output on the board which can be used for an alarm output. A suitable resistor and driver is all that would be required. The output would be limited to a critical alarm only though to marry up with other customers requirements. For integration into a tactile alarm you would be well advised to speak directly to Kevin.
You could integrate such an annunciator into the handset as there is room, but that design would still fall under Kevins intellectual property and it is only right he should benifit.

Brent

p.s.
Appologies to Kevin. Post edited.

thanks!
paul

18th April 2008, 08:33	#1 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,384	vibration alarm hello all, just a small question: is the use of vibration alarms limited by patents, and if so, in what way? regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

18th April 2008, 11:36	#2 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Home Build Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Home Build Join Date: Mar 2005 Location: "Da" Bronx Posts: 2,817	Re: vibration alarm Quote: (Originally Posted by paulraymaekers) hello all, just a small question: is the use of vibration alarms limited by patents, and if so, in what way? regards paul Juergensen marine has a patent on one, CCR research and Cis lunar (I believe) are licensees... __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated.
(Offline)

18th April 2008, 12:13	#3 (permalink)
heyydude King of the Geeks Current Rebreather/s: MK 15.X Optima Other CCR Other Rebreather/s: Other CCR Join Date: May 2005 Location: Addison, Pennsylvania Posts: 331	Re: vibration alarm Joe, That is correct. Paul - contact me directly and we'll talk. Kevin.
(Offline)

18th April 2008, 12:18	#4 (permalink)
divetheworld Dive porn pimp Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Not Bought Yet Inspiration Classic Inspiration Vision Classic Kiss Other CCR Join Date: Mar 2005 Location: Leeds, England Posts: 1,537	Re: vibration alarm If compliance with 5.9.1 is your goal in this, then we do have a spare output on the board which can be used for an alarm output. A suitable resistor and driver is all that would be required. The output would be limited to a critical alarm only though to marry up with other customers requirements. For integration into a tactile alarm you would be well advised to speak directly to Kevin. You could integrate such an annunciator into the handset as there is room, but that design would still fall under Kevins intellectual property and it is only right he should benifit. Brent p.s. Appologies to Kevin. Post edited. __________________ Self praise is no reccomendation. Dont try to be a great man, just be a man and let history be the judge of you. CHECK OUT OUR INTERWEBS FOR CUSTOM REBREATHER UPGRADES *WWW.NARKEDAT90.CO.UK* *http://www.grpservices.com/pursuit/* Supporting Shearwater Research Products in Europe Last edited by divetheworld : 18th April 2008 at 12:36. Reason: coz I'm an ass.
(Offline)

18th April 2008, 13:23	#5 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,384	Re: vibration alarm Quote: (Originally Posted by divetheworld) If compliance with 5.9.1 is your goal in this, then we do have a spare output on the board which can be used for an alarm output. A suitable resistor and driver is all that would be required. The output would be limited to a critical alarm only though to marry up with other customers requirements. For integration into a tactile alarm you would be well advised to speak directly to Kevin. You could integrate such an annunciator into the handset as there is room, but that design would still fall under Kevins intellectual property and it is only right he should benifit. Brent p.s. Appologies to Kevin. Post edited. thanks! paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode