Home Made Green Force Goodman Handle

Yellow box of doom · 29th December 2007, 17:04

I've recently 'invested' in a Greenfoce Tri-star plus torch. As has been mentioned on a number of forums the goodman handles offered by Greenforce aren't the best or most desirable.

I thought you might be interested in seeing a homemade handle fashioned from the standard battery mounted handle that comes with the FII battery and required nothing more complicated than a strong vice, a drill and a bit of brute force to bend it (or a mate with the said tools - thanks Richard):

Its not exactly the same as the 'standard' goodman but it does the job just as well, cost no extra over and above the torch (apart from a few screws and a pipe holder from a DIY store) and looks pretty neat especially as its then the same powered coated green of the rest of the Greenforce stuff. I reckon it looks pretty good, even if I say so myself - comments welcome.

Edvin M · 29th December 2007, 17:11

Nice, really good looking although I prefer goodman handles with bunge instead of metal. If I were you I would put the snap "above" the handle were the lamphead is held in place to be more "out of the way" and tie it together insted of the metal ring

Hyper-limits · 29th December 2007, 17:13

Nice and simple, I also fabricated my own Goodman handle for my GF just because I didn't care for the one sold by GreenForce.

Cheers

Al

Bech · 29th December 2007, 20:36

Nive but be careful with the liaison between stainless steel and alu...

Raph

wreckseeker · 29th December 2007, 20:41

nice werk! I make my own handle to but i call it the lack-man handle made from pvc and a heavy duty vecro strap, may have to post some pics!

Hyper-limits · 30th December 2007, 01:51

Quote: (Originally Posted by wreckseeker)

nice werk! I make my own handle to but i call it the lack-man handle made from pvc and a heavy duty vecro strap, may have to post some pics!

Lack Man Handle, too funny Aaron.

Cheers

Al

Explorer · 2nd January 2008, 15:08

Nice and clean. Well done.

Baerhog · 26th June 2008, 04:13

Quote: (Originally Posted by wreckseeker)

nice werk! I make my own handle to but i call it the lack-man handle made from pvc and a heavy duty vecro strap, may have to post some pics!

I think I would pefer one made of PVC myself, so I might be able to snap in and out.
I have a couple of different heads and will require different diameters but I would like to see the lack-man. Can I get a picture?

digital_steve · 26th June 2008, 04:44

whoa... thread revival!

in any rate, i bought a kent tooling goodman handle for my greenforce HID head as i'm crap @ DIY

**wedivebc** · 26th June 2008, 05:17

Quote: (Originally Posted by wreckseeker)

nice werk! I make my own handle to but i call it the lack-man handle made from pvc and a heavy duty vecro strap, may have to post some pics!

I am also a proud owner of a lack-man handle. Yours looks pretty good too.

29th December 2007, 17:11	#2 (permalink)
Edvin M New Member Current Rebreather/s: Home Build Other Rebreather/s: Home Build Join Date: Aug 2007 Location: Lysekil, Sweden Posts: 87	Re: Home Made Green Force Goodman Handle Nice, really good looking although I prefer goodman handles with bunge instead of metal. If I were you I would put the snap "above" the handle were the lamphead is held in place to be more "out of the way" and tie it together insted of the metal ring
(Offline)

29th December 2007, 17:13	#3 (permalink)
Hyper-limits Custom Title Allowed! Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Apr 2006 Location: Victoria BC Canada Posts: 126	Re: Home Made Green Force Goodman Handle Nice and simple, I also fabricated my own Goodman handle for my GF just because I didn't care for the one sold by GreenForce. Cheers Al __________________ "The oldest and strongest emotion of mankind is fear. And the oldest and strongest kind of fear is fear of the unknown" H.P. Lovecraft
(Offline)

29th December 2007, 20:36	#4 (permalink)
Bech New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Aug 2006 Posts: 41	Re: Home Made Green Force Goodman Handle Nive but be careful with the liaison between stainless steel and alu... Raph
(Offline)

29th December 2007, 20:41	#5 (permalink)
wreckseeker New Member Current Rebreather/s: Megalodon Other Rebreather/s: Megalodon Join Date: Dec 2006 Location: nanaimo b.c Posts: 41	Re: Home Made Green Force Goodman Handle nice werk! I make my own handle to but i call it the lack-man handle made from pvc and a heavy duty vecro strap, may have to post some pics!
(Offline)

30th December 2007, 01:51	#6 (permalink)
Hyper-limits Custom Title Allowed! Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Apr 2006 Location: Victoria BC Canada Posts: 126	Re: Home Made Green Force Goodman Handle Quote: (Originally Posted by wreckseeker) nice werk! I make my own handle to but i call it the lack-man handle made from pvc and a heavy duty vecro strap, may have to post some pics! Lack Man Handle, too funny Aaron. Cheers Al __________________ "The oldest and strongest emotion of mankind is fear. And the oldest and strongest kind of fear is fear of the unknown" H.P. Lovecraft
(Offline)

2nd January 2008, 15:08	#7 (permalink)
Explorer I will teach you a..... Current Rebreather/s: Evolution Megalodon Other Rebreather/s: Join Date: Sep 2005 Location: Alberta, Canada Posts: 760	Re: Home Made Green Force Goodman Handle Nice and clean. Well done. __________________ REALLY FRICKIN' TRAIN WRECKED.....
(Offline)

26th June 2008, 04:13	#8 (permalink)
Baerhog New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Jun 2008 Location: Florida Posts: 1	Re: Home Made Green Force Goodman Handle Quote: (Originally Posted by wreckseeker) nice werk! I make my own handle to but i call it the lack-man handle made from pvc and a heavy duty vecro strap, may have to post some pics! I think I would pefer one made of PVC myself, so I might be able to snap in and out. I have a couple of different heads and will require different diameters but I would like to see the lack-man. Can I get a picture?
(Offline)

26th June 2008, 04:44	#9 (permalink)
digital_steve New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Jan 2008 Location: Hobart Posts: 27	Re: Home Made Green Force Goodman Handle whoa... thread revival! in any rate, i bought a kent tooling goodman handle for my greenforce HID head as i'm crap @ DIY
(Online)

26th June 2008, 05:17	#10 (permalink)
wedivebc FIGJAM Current Rebreather/s: Megalodon Other CCR Other Rebreather/s: Not Bought Yet Inspiration Classic Sport Kiss Other CCR Join Date: Feb 2005 Location: Vancouver Island BC Canada Posts: 1,393	Re: Home Made Green Force Goodman Handle Quote: (Originally Posted by wreckseeker) nice werk! I make my own handle to but i call it the lack-man handle made from pvc and a heavy duty vecro strap, may have to post some pics! I am also a proud owner of a lack-man handle. Yours looks pretty good too. __________________ Cheers, Dave.... Man is the only animal burdened with the knowledge he will eventually die
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode