Jax mouthpiece for a Ray DSV ?

Stephane · 26th February 2007, 08:20

Hello,

Yesterday I made my first dives after 6 month of recovery from surgery. It was cool (and cold), the rEvo performed flawlessly.

The mouthpiece I have have a gag retainer, which is great for security, but is a little too thick for my jaws. So after few minutes, I don't feel confortable and sometimes it gives me nauseas.
When I was diving OC, I had a JAX mouthpiece and it is the best mouthpiece I ever had. The problem is that the Ray DSV is wider than a regular second stage so it is quite impossible to put it.

Is there a similar product that can be fitted into a Ray DSV (it is 42mm wide) ?

Thank you for your help.

hoppyinca · 28th February 2007, 20:30

Quote: (Originally Posted by Tino Corp.)

... JAX mouthpiece... Ray DSV is wider ...similar product that can be fitted into a Ray DSV (it is 42mm wide) ?

Thank you for your help.

I have not used this particular mouthpeice before, but evidently I eat mouthpeices; 3 in the past year (or sometimes step on them on the boat... oops!)...

I am currently using a Ray DSV, and have fitted several different mouth pieces on it. This time around I am using a Poseidon mouthpiece.

Basically any mouthpiece will work, just be gental putting it on... and don't step on it!

Hoppyinca

RebreatherNut · 28th February 2007, 20:40

I have used the Manta-Bite Mouthpiece on the Ray DSV, also the mouthpieces that come with Apeks regulators and have that orthodontic thingy on top work great as well.

cheers,
RBN

Stephane · 28th February 2007, 20:48

Hello,

Thank you both for your comments.

I don't like the orthodontic mouthpiece, it makes me wanna throw up.

I will try to heat the Jax to see if it can fit the Ray DSV. Hope it won't break.

PoseidonSv · 14th March 2007, 10:09

Hello I use JAX on my Ray dsv NO problem to mount if if you want to do it.

Stephane · 14th March 2007, 10:54

Hi,

I have mounted my old Jax mouthpiece on the Ray DSV. I guess it's OK, I will see tomorrow if it's not leaking.
I think I have over-heated the mouthpiece, I won't be able to put it on a normal regulator again.

Maybe the Seacure mouthpiece is more adapted as it is wider.

womble · 16th March 2007, 20:18

I use a JAX mouthpiece on a meg DSV. This was also too wide, so I heated the end that fits over the DSV (in hot water) until it was soft and then stretched it over the DSV. Just be gentle when stretching it over and you should be fine.

Stephane · 16th March 2007, 20:21

Quote: (Originally Posted by womble)

I use a JAX mouthpiece on a meg DSV. This was also too wide, so I heated the end that fits over the DSV (in hot water) until it was soft and then stretched it over the DSV. Just be gentle when stretching it over and you should be fine.

Yes, now I know i had to be gentle ...

The mouthpiece ripped off my hands when I was putting it on the DSV so now it is too wide and it's leaking. I will try to find a Seacure mouthpiece.

TheBcDiver · 16th March 2007, 21:21

Does fitting these type of mouth piece not increase the WOB?

I had thought of fitting one to my inspo but was tod that due to the above it was not a good idea. Anyone got experience of this?

tony13 · 29th May 2008, 20:42

Hi Stephane,
Any luck with a new mouth piece yet. I'm also looking to change mine but haven't found one I'm happy with yet.
Tony

26th February 2007, 08:20	#1 (permalink)
Stephane Stéphane Acounis Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Nantes - France Posts: 773	Jax mouthpiece for a Ray DSV ? Hello, Yesterday I made my first dives after 6 month of recovery from surgery. It was cool (and cold), the rEvo performed flawlessly. The mouthpiece I have have a gag retainer, which is great for security, but is a little too thick for my jaws. So after few minutes, I don't feel confortable and sometimes it gives me nauseas. When I was diving OC, I had a JAX mouthpiece and it is the best mouthpiece I ever had. The problem is that the Ray DSV is wider than a regular second stage so it is quite impossible to put it. Is there a similar product that can be fitted into a Ray DSV (it is 42mm wide) ? Thank you for your help. __________________ Stéphane
(Offline)

28th February 2007, 20:30	#2 (permalink)
hoppyinca New Member Current Rebreather/s: MK 15.X Other Rebreather/s: Join Date: Jun 2005 Location: Laguna Niguel, CA USA Posts: 252	Re: Jax mouthpiece for a Ray DSV ? Quote: (Originally Posted by Tino Corp.) ... JAX mouthpiece... Ray DSV is wider ...similar product that can be fitted into a Ray DSV (it is 42mm wide) ? Thank you for your help. I have not used this particular mouthpeice before, but evidently I eat mouthpeices; 3 in the past year (or sometimes step on them on the boat... oops!)... I am currently using a Ray DSV, and have fitted several different mouth pieces on it. This time around I am using a Poseidon mouthpiece. Basically any mouthpiece will work, just be gental putting it on... and don't step on it! Hoppyinca
(Offline)

28th February 2007, 20:40	#3 (permalink)
RebreatherNut Rebreather World Greeter Current Rebreather/s: Sport Kiss Ray Other Rebreather/s: Ray Join Date: Apr 2005 Location: Pacific Northwest Posts: 698	Re: Jax mouthpiece for a Ray DSV ? I have used the Manta-Bite Mouthpiece on the Ray DSV, also the mouthpieces that come with Apeks regulators and have that orthodontic thingy on top work great as well. cheers, RBN __________________ "One minute to go, Luck-meister! Then I'll be down on you like a buzzard on a gut wagon." - ALF
(Offline)

28th February 2007, 20:48	#4 (permalink)
Stephane Stéphane Acounis Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Nantes - France Posts: 773	Re: Jax mouthpiece for a Ray DSV ? Hello, Thank you both for your comments. I don't like the orthodontic mouthpiece, it makes me wanna throw up. I will try to heat the Jax to see if it can fit the Ray DSV. Hope it won't break. __________________ Stéphane
(Offline)

14th March 2007, 10:09	#5 (permalink)
PoseidonSv New Member Current Rebreather/s: Home Build Other Rebreather/s: Not Bought Yet Home Build Join Date: Jan 2006 Location: Sweden Posts: 56	Re: Jax mouthpiece for a Ray DSV ? Hello I use JAX on my Ray dsv NO problem to mount if if you want to do it.
(Offline)

14th March 2007, 10:54	#6 (permalink)
Stephane Stéphane Acounis Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Nantes - France Posts: 773	Re: Jax mouthpiece for a Ray DSV ? Hi, I have mounted my old Jax mouthpiece on the Ray DSV. I guess it's OK, I will see tomorrow if it's not leaking. I think I have over-heated the mouthpiece, I won't be able to put it on a normal regulator again. Maybe the Seacure mouthpiece is more adapted as it is wider. __________________ Stéphane
(Offline)

16th March 2007, 20:18	#7 (permalink)
womble Custom Title Allowed! Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Aug 2006 Location: UK Posts: 196	Re: Jax mouthpiece for a Ray DSV ? I use a JAX mouthpiece on a meg DSV. This was also too wide, so I heated the end that fits over the DSV (in hot water) until it was soft and then stretched it over the DSV. Just be gentle when stretching it over and you should be fine.
(Offline)

16th March 2007, 20:21	#8 (permalink)
Stephane Stéphane Acounis Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Nantes - France Posts: 773	Re: Jax mouthpiece for a Ray DSV ? Quote: (Originally Posted by womble) I use a JAX mouthpiece on a meg DSV. This was also too wide, so I heated the end that fits over the DSV (in hot water) until it was soft and then stretched it over the DSV. Just be gentle when stretching it over and you should be fine. Yes, now I know i had to be gentle ... The mouthpiece ripped off my hands when I was putting it on the DSV so now it is too wide and it's leaking. I will try to find a Seacure mouthpiece. __________________ Stéphane
(Offline)

16th March 2007, 21:21	#9 (permalink)
TheBcDiver New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Aug 2006 Location: Co. Antrim Posts: 39	Re: Jax mouthpiece for a Ray DSV ? Does fitting these type of mouth piece not increase the WOB? I had thought of fitting one to my inspo but was tod that due to the above it was not a good idea. Anyone got experience of this?
(Online)

29th May 2008, 20:42	#10 (permalink)
tony13 New Member Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Jul 2007 Location: NJ Posts: 58	Re: Jax mouthpiece for a Ray DSV ? Hi Stephane, Any luck with a new mouth piece yet. I'm also looking to change mine but haven't found one I'm happy with yet. Tony
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode