FS: BMR Impulse connector + cable and Munro Board

S. Marc

IMPULSE CONNECTOR AND CABLE:
One used impulse bulkhead connector and cable for sale, used on early model BMR 500 rebreathers.

Price $80.00 USD + shipping.

The Impulse bulkhead connector and cable were attached to my BMR 500, dove by me 2 times, by previous owner, unknown number of times (the connectors came from a box of BMR 500 parts I bought from Dick King last year). I removed it last night to replace it with a swagelok fitting.

The connectors and cables are very expensive to replace due to the connector being made of titanium. We site link is here:

IE55 / IE55(W) Subminiature

I have a second connector and cable that I will be removing soon (it is still threaded into the BMR lid) to replace with another swagelok fitting. Price for that connector and cable will be the same $80 USD + shipping.

Mark Munro PPO2.com Board and home made housing:
I have a used Mark Munro 3 PPO2 board for sale in a cylindrical lexan housing (homemade). Board was assembled by Mark about 5 years ago. Dove approx 40 times and never flooded.

Housing is newly machined on my lathe, is ugly, and is not yet threaded for screws at the cable end. Has a sealcon connector bonded in place on the cable end (uses 2 orings), and Plug end is bonded in. This housing has only been dove twice to a depth of 25 feet in fresh water to test the BMR. It is the third housing I made for this board.

Price for asembled board is $125 USD + shipping

I will throw in the housing for free, but caveat emptor on the housing, it may very well flood.

Any interest PM me with your email address and I will shoot some pics

Marc

__________________
My MK15.x is really a BMR 500 and is as Koputai says a "Bastard immitation of a proper rebreather"!!