FS Inspi Parts: ADV with Flo-stop & Neoprene CL

spunkmire · 5th July 2008, 11:47

FS:

1) Inspiration ADV, manufacturer type (not Bob Howell's), used but still works very well. comes with flow-stop (recently serviced) and medium pressure hose.
Reason for sale: streamlining kit and need the money (going simple-as-possible setup).

£100

2)Neoprene counterlungs, by Dave Thomspon designed and made. As ordinary counterlungs but single-wall high-density neoprene with a lycra outer,
built-in Apeks inflators and second dump valve on the very bottom of the exhale counterlung.
Rubber grommets to seal the fittings on. Black, size large to medium-large, I thought they were large but more like halfway to medium with consideration.
Threads for routing harness, I can supply clips for bottom of lungs if you are using a backplate harness.
Lie very flat, like two towels hanging over your shoulders, when inflated they stretch a little bit and when empty they go impressively flat but otherwise very much like your ordinary counterlungs.
Obviously not for sale in any of the diving shops!
-More streamlined in the water, comfortable and less "clutter" (no velcro anywhere), very cool and the bottom dump on the exhale CL is extremely good for getting the fluids out of it.

Reason for sale: too big for me (I am definitely a small-lunged person).

Location: West London, Great Britain. So offers in the UK are most welcome, though can sort something out for buyers elsewhere.

£180

PM me for details or pref. use email:

w underscore ingram at hotmail dot co dot uk.

Cheers
Will

spunkmire · 12th July 2008, 10:14

Hello,
It looks like the counterlungs are attracting a lot more attention than the ADV (dont' know why).
So here are the pictures. I am prepared to post them anywhere in the world.
They exactly as displayed, no extras. When switching over the t-pieces you remove the large rubber grommets (I think) and they seal on the rubber parts.
No the lycra is not bubbling on the underside, it's that the lungs were sewn to be creaseless when inflated (i.e. shaped to be puffed-up ab bit).
Cheers
Will

spunkmire · 12th July 2008, 10:28

Yet more pictures:
them in place, and me wearing them. I am about 6ft exactly (OK probably 5ft 11"

). I am using a Michael Hearn Alibox and a Custom Divers backplate with a comfy pad and a Diver Rite Rec wing.

Hansenvr6 · 26th July 2008, 08:21

Hi Will,
Where to bye the neopren counterlungs from new in small.

Thanks

Teddy

Ccrdiving inc.

spunkmire · 3rd August 2008, 15:35

Hi all,
Both counterlungs and ADV have now been sold. Thanks to all for looking.

Mark Chase · 3rd August 2008, 17:38

Hi M8

Sorry this jogged my memory about the T piece. I found it but I cant remember what sort of thread it should have. I think its a water trap right side piece so You would need to get a different hose fitting to use it.

PM me if you still want it.

ATB

Mark

5th July 2008, 11:47	#1 (permalink)
spunkmire New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Oct 2007 Location: southeast uk Posts: 20	FS Inspi Parts: ADV with Flo-stop & Neoprene CL FS: 1) Inspiration ADV, manufacturer type (not Bob Howell's), used but still works very well. comes with flow-stop (recently serviced) and medium pressure hose. Reason for sale: streamlining kit and need the money (going simple-as-possible setup). £100 2)Neoprene counterlungs, by Dave Thomspon designed and made. As ordinary counterlungs but single-wall high-density neoprene with a lycra outer, built-in Apeks inflators and second dump valve on the very bottom of the exhale counterlung. Rubber grommets to seal the fittings on. Black, size large to medium-large, I thought they were large but more like halfway to medium with consideration. Threads for routing harness, I can supply clips for bottom of lungs if you are using a backplate harness. Lie very flat, like two towels hanging over your shoulders, when inflated they stretch a little bit and when empty they go impressively flat but otherwise very much like your ordinary counterlungs. Obviously not for sale in any of the diving shops! -More streamlined in the water, comfortable and less "clutter" (no velcro anywhere), very cool and the bottom dump on the exhale CL is extremely good for getting the fluids out of it. Reason for sale: too big for me (I am definitely a small-lunged person). Location: West London, Great Britain. So offers in the UK are most welcome, though can sort something out for buyers elsewhere. £180 PM me for details or pref. use email: w underscore ingram at hotmail dot co dot uk. Cheers Will __________________ Totally confused
(Offline)

26th July 2008, 08:21	#4 (permalink)
Hansenvr6 New Member Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Other CCR Join Date: Oct 2005 Location: Denmark Posts: 9	Re: FS Inspi Parts: ADV with Flo-stop & Neoprene CL Hi Will, Where to bye the neopren counterlungs from new in small. Thanks Teddy Ccrdiving inc.
(Offline)

3rd August 2008, 15:35	#5 (permalink)
spunkmire New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Oct 2007 Location: southeast uk Posts: 20	Re: FS Inspi Parts: ADV with Flo-stop & Neoprene CL Hi all, Both counterlungs and ADV have now been sold. Thanks to all for looking. __________________ Totally confused
(Offline)

3rd August 2008, 17:38	#6 (permalink)
Mark Chase I go down for ages Current Rebreather/s: Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Jan 2005 Location: Kent Posts: 2,562	Re: FS Inspi Parts: ADV with Flo-stop & Neoprene CL Hi M8 Sorry this jogged my memory about the T piece. I found it but I cant remember what sort of thread it should have. I think its a water trap right side piece so You would need to get a different hose fitting to use it. PM me if you still want it. ATB Mark __________________ Is it supposed to make that noise ? I took my unit to the dive shop and demanded they bolt on every thing that would fit. Join my elite diving teem and get a Tshirt "Doing It Chasey"Hammerhead Eccr Advanced Diving System
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode