Pelagian DCCCR

Joergen Foged · 6th October 2006, 19:35

Hi - Anyone familiar with this Rig - a dutch diver has manufactured this and trains all interested in Thailand

JrgFgd

JonnyB · 6th October 2006, 19:46

Andy, who makes this is a member of this board.
Roger is also diving it and knows it.

/jonny

Joergen Foged · 8th October 2006, 17:23

Quote: (Originally Posted by JonnyB)

Andy, who makes this is a member of this board.
Roger is also diving it and knows it.

/jonny

Hi Jonny - thanks - can not find much about this rig except under Rebreathers Worldwide -

Joergen

JonnyB · 8th October 2006, 17:25

Check http://www.rebreatherlab.com

/Jonny

Joergen Foged · 10th October 2006, 18:28

Quote: (Originally Posted by JonnyB)

Check http://www.rebreatherlab.com

/Jonny

Hi Jonny - once more, thanks for info - I had preveiously seen that link, but I´m interested in reports on "how-it-work"
Also located Rogers article -

JrgFgd

PCDiver · 10th October 2006, 21:52

I was looking for an extra slim setup and the Pelagian seemed to fitt the bill. I requested info via the website, but no replies so far. Well, if they can't answer email ....

rogeringebo · 11th October 2006, 03:59

Please state what you want to know and I will try to answer your questions.
I speak to the builder on a regular basis and will pick up my own machine next week...

Cheers
Rodge

PCDiver · 11th October 2006, 05:25

Quote: (Originally Posted by rogeringebo)

Please state what you want to know and I will try to answer your questions.
I speak to the builder on a regular basis and will pick up my own machine next week...

Cheers
Rodge

<soap box mode on>
No thanks. When I buy an expensive machine I want support from the manufacturer, not from a user. I've had my share of communication and support problems with overseas manufacturers. And if they can't be bothered or don't have the resources to answer pre-sales questions, then I don't think their support later on will be better.
Over the last two years I've found two major exceptions in the diving industry, Amphibico and APD. Both have EXCELLENT customer support.
<soap box mode off>

But thanks for the offer Rodge. I still like the setup, but I'm worried about their support.

Ciao,

Peter

rogeringebo · 11th October 2006, 14:43

I know the stories behind why you dont get answers from the homepage.....the rebreather dont even look like the one on the picture....
The homepage was just to measure the interest in the comunity for his upcoming products and now its going from prototype to ready for market.Its a slow matter for a small company thats is under construction.
They spend all their time building the machines that customers have already ordered.I would guess its the same reason why its really hard to get answers from ISC (Megalodon).I wanted to come to the states,buy a machine and do the course...its quite a few dollars coming their way but I didnt even get an answer.
I understand your point and why you are worried.
I know that Rebreatherlab are hiring so more time can be spent on going to divefairs,answer e-mails and promotion in general.

Best regards
Roger

PCDiver · 11th October 2006, 14:52

Quote: (Originally Posted by rogeringebo)

the rebreather dont even look like the one on the picture....

Hi Roger,

Can you get us updated info, pricing and pics?

Tx,
Peter

6th October 2006, 19:35	#1 (permalink)
Joergen Foged New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Sep 2006 Location: Denmark Posts: 10	Pelagian DCCCR Hi - Anyone familiar with this Rig - a dutch diver has manufactured this and trains all interested in Thailand JrgFgd
(Offline)

6th October 2006, 19:46	#2 (permalink)
JonnyB Johnny The Hatch Current Rebreather/s: MK 15.X Titan Other CCR Other SCR Home Build Other Rebreather/s: Not Bought Yet Inspiration Classic Megalodon Sport Kiss Classic Kiss Other CCR Other SCR Home Build Join Date: Jan 2005 Location: Sweden (Stockholm)/Cyprus(Ayia Napa) Posts: 970	Re: Pelagian DCCCR Andy, who makes this is a member of this board. Roger is also diving it and knows it. /jonny __________________ A quote from Crazyduck - In remembering our own Rob Davies. "Outbound flight 777 heavy you are cleared for flight Due west into that warm red Texas sunset You have angels on your wings and divers memories on your six." Rest In Peace http://www.divetekcyprus.com http://www.diveccr.com
(Offline)

8th October 2006, 17:23	#3 (permalink)
Joergen Foged New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Sep 2006 Location: Denmark Posts: 10	Re: Pelagian DCCCR Quote: (Originally Posted by JonnyB) Andy, who makes this is a member of this board. Roger is also diving it and knows it. /jonny Hi Jonny - thanks - can not find much about this rig except under Rebreathers Worldwide - Joergen
(Offline)

8th October 2006, 17:25	#4 (permalink)
JonnyB Johnny The Hatch Current Rebreather/s: MK 15.X Titan Other CCR Other SCR Home Build Other Rebreather/s: Not Bought Yet Inspiration Classic Megalodon Sport Kiss Classic Kiss Other CCR Other SCR Home Build Join Date: Jan 2005 Location: Sweden (Stockholm)/Cyprus(Ayia Napa) Posts: 970	Re: Pelagian DCCCR Check http://www.rebreatherlab.com /Jonny __________________ A quote from Crazyduck - In remembering our own Rob Davies. "Outbound flight 777 heavy you are cleared for flight Due west into that warm red Texas sunset You have angels on your wings and divers memories on your six." Rest In Peace http://www.divetekcyprus.com http://www.diveccr.com
(Offline)

10th October 2006, 18:28	#5 (permalink)
Joergen Foged New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Sep 2006 Location: Denmark Posts: 10	Re: Pelagian DCCCR Quote: (Originally Posted by JonnyB) Check http://www.rebreatherlab.com /Jonny Hi Jonny - once more, thanks for info - I had preveiously seen that link, but I´m interested in reports on "how-it-work" Also located Rogers article - JrgFgd
(Offline)

10th October 2006, 21:52	#6 (permalink)
PCDiver Submerge Productions Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Feb 2005 Location: Belgium Posts: 968	Re: Pelagian DCCCR I was looking for an extra slim setup and the Pelagian seemed to fitt the bill. I requested info via the website, but no replies so far. Well, if they can't answer email ....
(Offline)

11th October 2006, 03:59	#7 (permalink)
rogeringebo Custom Title Allowed! Current Rebreather/s: Pelagian Other Rebreather/s: Megalodon Classic Kiss Pelagian Join Date: Sep 2005 Location: Stockholm Sweden Posts: 700	Re: Pelagian DCCCR Please state what you want to know and I will try to answer your questions. I speak to the builder on a regular basis and will pick up my own machine next week... Cheers Rodge
(Offline)

11th October 2006, 05:25	#8 (permalink)
PCDiver Submerge Productions Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Feb 2005 Location: Belgium Posts: 968	Re: Pelagian DCCCR Quote: (Originally Posted by rogeringebo) Please state what you want to know and I will try to answer your questions. I speak to the builder on a regular basis and will pick up my own machine next week... Cheers Rodge <soap box mode on> No thanks. When I buy an expensive machine I want support from the manufacturer, not from a user. I've had my share of communication and support problems with overseas manufacturers. And if they can't be bothered or don't have the resources to answer pre-sales questions, then I don't think their support later on will be better. Over the last two years I've found two major exceptions in the diving industry, Amphibico and APD. Both have EXCELLENT customer support. <soap box mode off> But thanks for the offer Rodge. I still like the setup, but I'm worried about their support. Ciao, Peter
(Offline)

11th October 2006, 14:43	#9 (permalink)
rogeringebo Custom Title Allowed! Current Rebreather/s: Pelagian Other Rebreather/s: Megalodon Classic Kiss Pelagian Join Date: Sep 2005 Location: Stockholm Sweden Posts: 700	Re: Pelagian DCCCR I know the stories behind why you dont get answers from the homepage.....the rebreather dont even look like the one on the picture.... The homepage was just to measure the interest in the comunity for his upcoming products and now its going from prototype to ready for market.Its a slow matter for a small company thats is under construction. They spend all their time building the machines that customers have already ordered.I would guess its the same reason why its really hard to get answers from ISC (Megalodon).I wanted to come to the states,buy a machine and do the course...its quite a few dollars coming their way but I didnt even get an answer. I understand your point and why you are worried. I know that Rebreatherlab are hiring so more time can be spent on going to divefairs,answer e-mails and promotion in general. Best regards Roger
(Offline)

11th October 2006, 14:52	#10 (permalink)
PCDiver Submerge Productions Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Join Date: Feb 2005 Location: Belgium Posts: 968	Re: Pelagian DCCCR Quote: (Originally Posted by rogeringebo) the rebreather dont even look like the one on the picture.... Hi Roger, Can you get us updated info, pricing and pics? Tx, Peter
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode