Calibration!

Allan_o · 18th January 2007, 15:57

Hi.

Im having a hard time understanding one of my cells, it reads 0% in the health check, the is a C6 (march 2006) but has not been diving before a week ago.

How does the boris calculate the lifetime expectancy of the cells?
Could it be due to a cell showing lower than 8mv exposed to air?
When i calibrate both primary and secondary, the cell is right on, and has no problem showing 1,3 ppo2 or more ??

Anyone has an idea?

regards Allan

Almvsalutay · 19th January 2007, 15:21

Hi Allan
Check the jack pin connector on the pin that plugs into the cell give it a clean.
Also what is the Millivolt readings for the cell on the secondary display?
Even if the millivolts is below 8mv the cell health would give a reading.
I reckon its a poor connection.

Regards, Al

CCR-DIVER · 19th January 2007, 16:44

Quote: (Originally Posted by Almvsalutay)

Hi Allan
Check the jack pin connector on the pin that plugs into the cell give it a clean.
Also what is the Millivolt readings for the cell on the secondary display?
Even if the millivolts is below 8mv the cell health would give a reading.
I reckon its a poor connection.

Regards, Al

I All,

Any better conection upgrade for the future?

cheers

josé

18th January 2007, 15:57	#1 (permalink)
Allan_o New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Dec 2005 Location: Copenhagen Denmark Posts: 81	Calibration! Hi. Im having a hard time understanding one of my cells, it reads 0% in the health check, the is a C6 (march 2006) but has not been diving before a week ago. How does the boris calculate the lifetime expectancy of the cells? Could it be due to a cell showing lower than 8mv exposed to air? When i calibrate both primary and secondary, the cell is right on, and has no problem showing 1,3 ppo2 or more ?? Anyone has an idea? regards Allan
(Offline)

19th January 2007, 15:21	#2 (permalink)
Almvsalutay New Member Current Rebreather/s: Other CCR Other Rebreather/s: MK 15.X Other CCR Join Date: Mar 2005 Location: Poole Dorset Posts: 13	Re: Calibration! Hi Allan Check the jack pin connector on the pin that plugs into the cell give it a clean. Also what is the Millivolt readings for the cell on the secondary display? Even if the millivolts is below 8mv the cell health would give a reading. I reckon its a poor connection. Regards, Al __________________ Al Wright Skype: salutay
(Offline)

19th January 2007, 16:44	#3 (permalink)
CCR-DIVER New Member Current Rebreather/s: Inspiration Classic Ouroboros Other Rebreather/s: Inspiration Classic Join Date: Jun 2005 Location: Portugal Posts: 73	Re: Calibration! Quote: (Originally Posted by Almvsalutay) Hi Allan Check the jack pin connector on the pin that plugs into the cell give it a clean. Also what is the Millivolt readings for the cell on the secondary display? Even if the millivolts is below 8mv the cell health would give a reading. I reckon its a poor connection. Regards, Al I All, Any better conection upgrade for the future? cheers josé __________________ *José Marques* *www.in-silence.com*
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode