secondary display dont switch off

IN468 · 16th June 2008, 12:54

As the title say, has anyone idea of the problem

I opened the battery cap for battery check

after reassembling display dont switch off

richc · 18th June 2008, 11:27

Quote: (Originally Posted by IN468)

As the title say, has anyone idea of the problem

I opened the battery cap for battery check

after reassembling display dont switch off

Have you checked the switches? I had this happen once - one of the switches snapped - looked OK from the outside but the display thoguht I had it permanently held in. Remove the circlips and the switches pop out - all very simple. I think it's the top switch (the bottom dow the mV reading, althgouth that's from memory). I swapped them over whilst waiting for a replacement. Hope that makes sense!Rich

Marky Mark · 18th June 2008, 12:17

You lucky bu@@er, my Kiss has that unit as the primary display and it's a pita having to switch them back on every couple of minutes

Are you sure you didn't jam the button whilst wrestling with the battery cap, it's awkward with the cable gland getting in the way.

Good luck
MyM

Frankie Pellegrino · 18th June 2008, 17:07

Ditto what Richc wrote
I bet the switch is broken and the magnet is stuck to your secondary bulk head. It happened to me once.
Best of luck.

IN468 · 18th June 2008, 19:58

you are all right, one switch is broken and stuck in

thanks a lot to you all

Giocollection · 7th July 2008, 12:24

Quote: (Originally Posted by IN468)

you are all right, one switch is broken and stuck in

thanks a lot to you all

No No
change you battery 3,6 v with 1,5 this is the reason.....

aknelson · 8th July 2008, 00:04

The display turns off with 1.5V Lithium cells. As long it works with the regular 1.5V cells it is fine with me why buy the special 3.6V

However I had the same Symptom. Replacing the Li-cell helped.

Andreas

vincnt moore · 8th July 2008, 18:24

I had the same exact problem, batterys new, unit brand new 2 days of diving..Sent it back to J/M and the pressure switch was bad they replaced the whole unit no hassle, quick service..

16th June 2008, 12:54	#1 (permalink)
IN468 Custom Title Allowed! Current Rebreather/s: Ouroboros Other Rebreather/s: Inspiration Classic Join Date: Feb 2006 Location: Bavaria Posts: 142	secondary display dont switch off As the title say, has anyone idea of the problem I opened the battery cap for battery check after reassembling display dont switch off
(Online)

18th June 2008, 11:27	#2 (permalink)
richc New Member Current Rebreather/s: Ouroboros Other Rebreather/s: Join Date: Nov 2005 Location: Hove actually Posts: 40	Re: secondary display dont switch off Quote: (Originally Posted by IN468) As the title say, has anyone idea of the problem I opened the battery cap for battery check after reassembling display dont switch off Have you checked the switches? I had this happen once - one of the switches snapped - looked OK from the outside but the display thoguht I had it permanently held in. Remove the circlips and the switches pop out - all very simple. I think it's the top switch (the bottom dow the mV reading, althgouth that's from memory). I swapped them over whilst waiting for a replacement. Hope that makes sense!Rich
(Offline)

18th June 2008, 12:17	#3 (permalink)
Marky Mark New Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Oct 2006 Location: Darlington, UK Posts: 88	Re: secondary display dont switch off You lucky bu@@er, my Kiss has that unit as the primary display and it's a pita having to switch them back on every couple of minutes Are you sure you didn't jam the button whilst wrestling with the battery cap, it's awkward with the cable gland getting in the way. Good luck MyM __________________ It'd be rude not to. "You are a terrestrial mammal for crying out loud - you have no business going underwater in the first place." - Richard Pyle (and my mum)
(Offline)

18th June 2008, 17:07	#4 (permalink)
Frankie Pellegrino Custom Title Allowed! Current Rebreather/s: Classic Kiss Ouroboros Other Rebreather/s: Inspiration Classic Join Date: Jan 2006 Location: NYC New York Posts: 136	Re: secondary display dont switch off Ditto what Richc wrote I bet the switch is broken and the magnet is stuck to your secondary bulk head. It happened to me once. Best of luck.
(Offline)

18th June 2008, 19:58	#5 (permalink)
IN468 Custom Title Allowed! Current Rebreather/s: Ouroboros Other Rebreather/s: Inspiration Classic Join Date: Feb 2006 Location: Bavaria Posts: 142	Re: secondary display dont switch off you are all right, one switch is broken and stuck in thanks a lot to you all
(Online)

7th July 2008, 12:24	#6 (permalink)
Giocollection New Member Current Rebreather/s: Inspiration Vision Ouroboros Other Rebreather/s: Megalodon Join Date: Nov 2006 Location: Pavia-Italy Posts: 12	Re: secondary display dont switch off Quote: (Originally Posted by IN468) you are all right, one switch is broken and stuck in thanks a lot to you all No No change you battery 3,6 v with 1,5 this is the reason.....
(Offline)

8th July 2008, 00:04	#7 (permalink)
aknelson New Member Current Rebreather/s: Ouroboros Dolphin Other Rebreather/s: Ouroboros Dolphin Join Date: Dec 2005 Location: Minnesota Posts: 78	Re: secondary display dont switch off The display turns off with 1.5V Lithium cells. As long it works with the regular 1.5V cells it is fine with me why buy the special 3.6V However I had the same Symptom. Replacing the Li-cell helped. Andreas
(Offline)

8th July 2008, 18:24	#8 (permalink)
vincnt moore New Member Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Apr 2007 Location: Philadelphia Pa. Posts: 56	Re: secondary display dont switch off I had the same exact problem, batterys new, unit brand new 2 days of diving..Sent it back to J/M and the pressure switch was bad they replaced the whole unit no hassle, quick service..
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode