It appears you have not yet registered with our community. To register for free click here
Rebreather World
       
Go Back Rebreather World Rebreathers, Components and Accessories Closed Circuit Rebreathers Megalodon Rebreather Official ISC Support Forums for Owners

Original Meg-VR3-Kit / high readings



Reply
 
LinkBack Thread Tools Display Modes
Old 23rd December 2007, 16:22   #1 (permalink)
New Member
 
JonORunde's Avatar

Current Rebreather/s:
Megalodon

Other Rebreather/s:
 
Join Date: Dec 2005
Location: Norway
Posts: 88
JonORunde is an unknown quantity at this point
Original Meg-VR3-Kit / high readings

I have the original VR3-kit from ISC on my COPIS-Meg, cable plugged into right lung, the little K1d cell.
The cell calibrates perfectly on air and O2 on the surface.
When diving, the VR3 show _really_ high ppO2 (like 2bar+)

Is this a design-flaw?

My thougt was that either
1. It is something wrong with the cell/vr3/something
or, more likely
2. The cell is located in the right lung. In the bottom of that lung, O2 is added, as this is a COPIS-meg. ON the top of the lung, the T-pieces are, and gas flows through when I breath.
As gas goes the path of least resistance, why should any mixed gas force itself down into the lung ?
If so, all I measure, is high ppO2-content that is at the bottom of the lung, sometimes flushed even more with pure O2.

Am I right or what?

jon o
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 23rd December 2007, 17:05   #2 (permalink)
Johnny The Hatch
 
JonnyB's Avatar

Current Rebreather/s:
MK 15.X
Titan
Other CCR
Other SCR
Home Build

Other Rebreather/s:
Not Bought Yet
Inspiration Classic
Megalodon
Sport Kiss
Classic Kiss
Other CCR
Other SCR
Home Build
 
Join Date: Jan 2005
Location: Sweden (Stockholm)/Cyprus(Ayia Napa)
Posts: 970
JonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really nice
Send a message via MSN to JonnyB Send a message via Skype™ to JonnyB
Re: Original Meg-VR3-Kit / high readings

Quote: (Originally Posted by JonORunde) View Original Post
I have the original VR3-kit from ISC on my COPIS-Meg, cable plugged into right lung, the little K1d cell.
The cell calibrates perfectly on air and O2 on the surface.
When diving, the VR3 show _really_ high ppO2 (like 2bar+)

Is this a design-flaw?

My thougt was that either
1. It is something wrong with the cell/vr3/something
or, more likely
2. The cell is located in the right lung. In the bottom of that lung, O2 is added, as this is a COPIS-meg. ON the top of the lung, the T-pieces are, and gas flows through when I breath.
As gas goes the path of least resistance, why should any mixed gas force itself down into the lung ?
If so, all I measure, is high ppO2-content that is at the bottom of the lung, sometimes flushed even more with pure O2.

Am I right or what?

jon o
The design where you have and ADV port in your right lung will not work when you are diving the unit manually, either by having a COPIS or just diving manually. THis is due to the fact that you will be adding O2 straight on to the cell every time and it will be spiking.
As i see it there is only one sollution for you and that it to switch side with the ADV.
The only other sollution is to purchase another right lung witout the port and buy the adapter that goes ontop the head that allowes you to have a K1D next to the other cells.

/Jonny
__________________
A quote from Crazyduck - In remembering our own Rob Davies.
"Outbound flight 777 heavy you are cleared for flight
Due west into that warm red Texas sunset
You have angels on your wings and divers memories on your six."

Rest In Peace

http://www.divetekcyprus.com
http://www.diveccr.com
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 23rd December 2007, 17:29   #3 (permalink)
Dave Tomblin

 
wedivebc's Avatar

Current Rebreather/s:
Megalodon
Other CCR

Other Rebreather/s:
Not Bought Yet
Inspiration Classic
Sport Kiss
Other CCR
 
Join Date: Feb 2005
Location: Vancouver Island BC Canada
Posts: 1,444
wedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to all
Re: Original Meg-VR3-Kit / high readings

Quote: (Originally Posted by JonnyB) View Original Post
The only other sollution is to purchase another right lung witout the port and buy the adapter that goes ontop the head that allowes you to have a K1D next to the other cells.

/Jonny
How about putting the O2 addition into the left side mixed gas bypass.
No need to change ADV position
__________________
Cheers,

Dave....

Man is the only animal burdened with the knowledge he will eventually die
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 23rd December 2007, 17:36   #4 (permalink)
New Member
 
JonORunde's Avatar

Current Rebreather/s:
Megalodon

Other Rebreather/s:
 
Join Date: Dec 2005
Location: Norway
Posts: 88
JonORunde is an unknown quantity at this point
Re: Original Meg-VR3-Kit / high readings

Both good ideas, I will try both, see what I am most comfortable with.

Both O2-addition and dil-flush is now muscle-memory, and must be relearned

Maybe If i have both O2 and dil on same side, that will be a problem, adding dil while adding O2 and such.
Will try anyways...

jon o
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 23rd December 2007, 18:26   #5 (permalink)
Dave Tomblin

 
wedivebc's Avatar

Current Rebreather/s:
Megalodon
Other CCR

Other Rebreather/s:
Not Bought Yet
Inspiration Classic
Sport Kiss
Other CCR
 
Join Date: Feb 2005
Location: Vancouver Island BC Canada
Posts: 1,444
wedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to allwedivebc is a name known to all
Re: Original Meg-VR3-Kit / high readings

Quote: (Originally Posted by JonORunde) View Original Post
Both good ideas, I will try both, see what I am most comfortable with.

Both O2-addition and dil-flush is now muscle-memory, and must be relearned

Maybe If i have both O2 and dil on same side, that will be a problem, adding dil while adding O2 and such.
Will try anyways...

jon o
I have never had to add O2 and dil at the same time. Why would you?
__________________
Cheers,

Dave....

Man is the only animal burdened with the knowledge he will eventually die
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 23rd December 2007, 21:08   #6 (permalink)
New Member
 
JonORunde's Avatar

Current Rebreather/s:
Megalodon

Other Rebreather/s:
 
Join Date: Dec 2005
Location: Norway
Posts: 88
JonORunde is an unknown quantity at this point
Re: Original Meg-VR3-Kit / high readings

Quote: (Originally Posted by wedivebc) View Original Post
I have never had to add O2 and dil at the same time. Why would you?
What I mean, is that if I add O2, and then press the lung a bit together, I might fire the ADV, thus cancelling out the O2-addition.
Don't know if it is a problem, will check it out


Jon O
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 24th December 2007, 13:44   #7 (permalink)
Johnny The Hatch
 
JonnyB's Avatar

Current Rebreather/s:
MK 15.X
Titan
Other CCR
Other SCR
Home Build

Other Rebreather/s:
Not Bought Yet
Inspiration Classic
Megalodon
Sport Kiss
Classic Kiss
Other CCR
Other SCR
Home Build
 
Join Date: Jan 2005
Location: Sweden (Stockholm)/Cyprus(Ayia Napa)
Posts: 970
JonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really niceJonnyB is just really nice
Send a message via MSN to JonnyB Send a message via Skype™ to JonnyB
Re: Original Meg-VR3-Kit / high readings

Quote: (Originally Posted by wedivebc) View Original Post
How about putting the O2 addition into the left side mixed gas bypass.
No need to change ADV position
Hi Dave, that is true, i have thought of that myself. And the only reason as i see that i would not do that is that i do not want to break the Right=Rich Left=Lean standard.
Some other people i have been speaking with say to me that they prefer this way so that they can scooter with right hand.

/Jonny
__________________
A quote from Crazyduck - In remembering our own Rob Davies.
"Outbound flight 777 heavy you are cleared for flight
Due west into that warm red Texas sunset
You have angels on your wings and divers memories on your six."

Rest In Peace

http://www.divetekcyprus.com
http://www.diveccr.com
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 24th December 2007, 14:53   #8 (permalink)
Worship the feminine
 
Gilles's Avatar

Current Rebreather/s:
Megalodon

Other Rebreather/s:
 
Join Date: Sep 2005
Location: Den Haag (Netherlands)
Posts: 762
Gilles is just really niceGilles is just really niceGilles is just really niceGilles is just really niceGilles is just really niceGilles is just really niceGilles is just really niceGilles is just really niceGilles is just really nice
Re: Original Meg-VR3-Kit / high readings

Quote: (Originally Posted by JonORunde) View Original Post
What I mean, is that if I add O2, and then press the lung a bit together, I might fire the ADV, thus cancelling out the O2-addition.
Don't know if it is a problem, will check it out


Jon O
This will not be a problem. Plugging in your O2 on the left gives you the following advantages;

1) Complete Rebreather operation with one hand. Right hand is free for reel/light/etc
2) Better cell response to manual addition
3) Better O2 flushing capability/efficiency

Quote: (Originally Posted by JonnyB) View Original Post
Hi Dave, that is true, i have thought of that myself. And the only reason as i see that i would not do that is that i do not want to break the Right=Rich Left=Lean standard.
Some other people i have been speaking with say to me that they prefer this way so that they can scooter with right hand.

/Jonny
Following our discussion about this, I have made my O2 hose a yellow one to make it obvious what gas source it is.
__________________
Gilles
http://www.dirrebreather.com
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 24th December 2007, 16:04   #9 (permalink)
In search of Law breaking
 
Outlaw's Avatar

Current Rebreather/s:
Megalodon

Other Rebreather/s:
 
Join Date: Aug 2006
Location: Cyprus, Nicosia
Posts: 634
Outlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the rough
Re: Original Meg-VR3-Kit / high readings

Quote: (Originally Posted by JonORunde) View Original Post
What I mean, is that if I add O2, and then press the lung a bit together, I might fire the ADV, thus cancelling out the O2-addition.
Don't know if it is a problem, will check it out


Jon O
hello Jon O,

i am one of the people who support the o2 hose to be on the left lung. also correct from Gilles regarding the points he gives out as positives from the left lung dil and o2 additions.

regarding your concerns about mistakenly pressing the lung and adding some dil in i suggest you use a shut off valve on the ADV. then there is no problem. try it and let me know.

hope it helps and it gives you peace of mind.

Thanks.

Spyros
__________________
CMAS - IANTD - TDI
Kamikazi Instrustor Trainer
DIRRebreather Team Member
----------------------------
"Once an Outlaw, always an Outlaw"
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Old 24th December 2007, 16:13   #10 (permalink)
In search of Law breaking
 
Outlaw's Avatar

Current Rebreather/s:
Megalodon

Other Rebreather/s:
 
Join Date: Aug 2006
Location: Cyprus, Nicosia
Posts: 634
Outlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the roughOutlaw is a jewel in the rough
Re: Original Meg-VR3-Kit / high readings

Quote: (Originally Posted by Gilles) View Original Post
Following our discussion about this, I have made my O2 hose a yellow one to make it obvious what gas source it is.
Gilles,

i have fought with these thoughts for a long time now, and i have come to the conclusion that in case of an emergency and another diver finds you unconscious, then if is a Rebreather diver, or better say an RB familiar diver, i guess he/she should know which is which or should recognize which is which quite fast. if is a non RB familiar diver, do you think he/she can save you in any other way, apart from sticking an oc reg into your mouth? personally i doubt it. off course the colour might increase chances, but i really think that if RB familiar, then one would know. also one would recognize what ADV valve is...

make a poll? statistically speaking, is there any Rebreather diver who is not in a position to recognize an ADV? how many think that an OC non RB familiar diver would recognize an ADV valve, and or which is which on a RB.

just my personal thoughts.

Thanks
__________________
CMAS - IANTD - TDI
Kamikazi Instrustor Trainer
DIRRebreather Team Member
----------------------------
"Once an Outlaw, always an Outlaw"
(Offline)
 
Digg this Post!Add Post to del.icio.us
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



RebreatherWorld.Com ©2005 - 2008
Rebreather World, Rebreather World and the Rebreather World Logo are Trademarks
All rights reserved, no republishing of content without written permission.
By using this website you have agreed to our Terms & Conditions of Use

Search Engine Optimization by vBSEO 3.1.0