Wattmeiser solenoid options

mempilot · 27th May 2008, 19:59

I have a Meg with Apecs 2.00 and the Wattmeiser (sp?). I don't believe there is an upgrade for me, since new software won't work with the old solenoid and vice versa.

If the trusty WM solenoid goes Tango Uniform on me, are they still available?

Thanks,

Eric

JonnyB · 27th May 2008, 21:17

Quote: (Originally Posted by mempilot)

I have a Meg with Apecs 2.00 and the Wattmeiser (sp?). I don't believe there is an upgrade for me, since new software won't work with the old solenoid and vice versa.

If the trusty WM solenoid goes Tango Uniform on me, are they still available?

Thanks,

Eric

Hey Eric, i believe the solenoid upgrade is about 250US

/Jonny

mempilot · 27th May 2008, 22:44

Quote: (Originally Posted by JonnyB)

Hey Eric, i believe the solenoid upgrade is about 250US

/Jonny

Can 2.00 drive the new solenoid though?

Thanks, Eric

BTW, did you find out anything from Gene about the HS?

kmev · 27th May 2008, 22:48

Quote: (Originally Posted by mempilot)

Can 2.00 drive the new solenoid though?

No - the injection rates are different between the two solenoids and the Jaska requires longer firing times, thus different software.

mempilot · 27th May 2008, 22:54

Quote: (Originally Posted by kmev)

No - the injection rates are different between the two solenoids and the Jaska requires longer firing times, thus different software.

That's what I thought. So I'm stuck with a head change unless the wattsmeisers are still available in the event of the solenoid croaking.

kmev · 27th May 2008, 23:07

The Wattmizers can be had for cheap, but you have to purchase a minimum of 100: Miniature Valves : 12 Volt Solenoid Valves : Special Materials Solenoid Valves : Solenoid Solutions Inc

Last time I talked to Jerry at ISC he said they can easily do an upgrade to the Jaska and newer software, but I didn't ask the price. If you find out what the cost is please let us know.

JonnyB · 27th May 2008, 23:29

Quote: (Originally Posted by mempilot)

That's what I thought. So I'm stuck with a head change unless the wattsmeisers are still available in the event of the solenoid croaking.

You can upgrade the solenoid for 250US and the software to 2.06 for another 100US and that should work for you.

/Jonny

p.s nothing yet from Gene, will call him again tomorrow.

mempilot · 27th May 2008, 23:52

Quote: (Originally Posted by JonnyB)

You can upgrade the solenoid for 250US and the software to 2.06 for another 100US and that should work for you.

/Jonny

p.s nothing yet from Gene, will call him again tomorrow.

OK. That would be a great option then. Thanks.

27th May 2008, 19:59	#1 (permalink)
mempilot Eric Stadtmueller Current Rebreather/s: Megalodon Other Rebreather/s: Megalodon Join Date: Aug 2006 Location: Ft. Lauderdale Posts: 1,469	Wattmeiser solenoid options I have a Meg with Apecs 2.00 and the Wattmeiser (sp?). I don't believe there is an upgrade for me, since new software won't work with the old solenoid and vice versa. If the trusty WM solenoid goes Tango Uniform on me, are they still available? Thanks, Eric __________________ Eric Stadtmueller, otherwise known as, MEM "Da Pilot"
(Offline)

27th May 2008, 21:17	#2 (permalink)
JonnyB Johnny The Hatch Current Rebreather/s: MK 15.X Titan Other CCR Other SCR Home Build Other Rebreather/s: Not Bought Yet Inspiration Classic Megalodon Sport Kiss Classic Kiss Other CCR Other SCR Home Build Join Date: Jan 2005 Location: Sweden (Stockholm)/Cyprus(Ayia Napa) Posts: 970	Re: Wattmeiser solenoid options Quote: (Originally Posted by mempilot) I have a Meg with Apecs 2.00 and the Wattmeiser (sp?). I don't believe there is an upgrade for me, since new software won't work with the old solenoid and vice versa. If the trusty WM solenoid goes Tango Uniform on me, are they still available? Thanks, Eric Hey Eric, i believe the solenoid upgrade is about 250US /Jonny __________________ A quote from Crazyduck - In remembering our own Rob Davies. "Outbound flight 777 heavy you are cleared for flight Due west into that warm red Texas sunset You have angels on your wings and divers memories on your six." Rest In Peace http://www.divetekcyprus.com http://www.diveccr.com
(Offline)

27th May 2008, 22:44	#3 (permalink)
mempilot Eric Stadtmueller Current Rebreather/s: Megalodon Other Rebreather/s: Megalodon Join Date: Aug 2006 Location: Ft. Lauderdale Posts: 1,469	Re: Wattmeiser solenoid options Quote: (Originally Posted by JonnyB) Hey Eric, i believe the solenoid upgrade is about 250US /Jonny Can 2.00 drive the new solenoid though? Thanks, Eric BTW, did you find out anything from Gene about the HS? __________________ Eric Stadtmueller, otherwise known as, MEM "Da Pilot"
(Offline)

27th May 2008, 22:48	#4 (permalink)
kmev New Member Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Jul 2006 Location: Wisconsin Posts: 40	Re: Wattmeiser solenoid options Quote: (Originally Posted by mempilot) Can 2.00 drive the new solenoid though? No - the injection rates are different between the two solenoids and the Jaska requires longer firing times, thus different software.
(Offline)

27th May 2008, 22:54	#5 (permalink)
mempilot Eric Stadtmueller Current Rebreather/s: Megalodon Other Rebreather/s: Megalodon Join Date: Aug 2006 Location: Ft. Lauderdale Posts: 1,469	Re: Wattmeiser solenoid options Quote: (Originally Posted by kmev) No - the injection rates are different between the two solenoids and the Jaska requires longer firing times, thus different software. That's what I thought. So I'm stuck with a head change unless the wattsmeisers are still available in the event of the solenoid croaking. __________________ Eric Stadtmueller, otherwise known as, MEM "Da Pilot"
(Offline)

27th May 2008, 23:07	#6 (permalink)
kmev New Member Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Jul 2006 Location: Wisconsin Posts: 40	Re: Wattmeiser solenoid options The Wattmizers can be had for cheap, but you have to purchase a minimum of 100: Miniature Valves : 12 Volt Solenoid Valves : Special Materials Solenoid Valves : Solenoid Solutions Inc Last time I talked to Jerry at ISC he said they can easily do an upgrade to the Jaska and newer software, but I didn't ask the price. If you find out what the cost is please let us know.
(Offline)

27th May 2008, 23:29	#7 (permalink)
JonnyB Johnny The Hatch Current Rebreather/s: MK 15.X Titan Other CCR Other SCR Home Build Other Rebreather/s: Not Bought Yet Inspiration Classic Megalodon Sport Kiss Classic Kiss Other CCR Other SCR Home Build Join Date: Jan 2005 Location: Sweden (Stockholm)/Cyprus(Ayia Napa) Posts: 970	Re: Wattmeiser solenoid options Quote: (Originally Posted by mempilot) That's what I thought. So I'm stuck with a head change unless the wattsmeisers are still available in the event of the solenoid croaking. You can upgrade the solenoid for 250US and the software to 2.06 for another 100US and that should work for you. /Jonny p.s nothing yet from Gene, will call him again tomorrow. __________________ A quote from Crazyduck - In remembering our own Rob Davies. "Outbound flight 777 heavy you are cleared for flight Due west into that warm red Texas sunset You have angels on your wings and divers memories on your six." Rest In Peace http://www.divetekcyprus.com http://www.diveccr.com
(Offline)

27th May 2008, 23:52	#8 (permalink)
mempilot Eric Stadtmueller Current Rebreather/s: Megalodon Other Rebreather/s: Megalodon Join Date: Aug 2006 Location: Ft. Lauderdale Posts: 1,469	Re: Wattmeiser solenoid options Quote: (Originally Posted by JonnyB) You can upgrade the solenoid for 250US and the software to 2.06 for another 100US and that should work for you. /Jonny p.s nothing yet from Gene, will call him again tomorrow. OK. That would be a great option then. Thanks. __________________ Eric Stadtmueller, otherwise known as, MEM "Da Pilot"
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode