O2ptima ADV schematic

devilgas · 28th October 2007, 18:15

Does anyone have a service diagram for the ADV?

Had one go tits up in Bonaire. Now have to make it work again after taking 1 each big screw driver to it to make it stop free flowing.

***ScubaDadMiami*** · 5th November 2007, 19:11

Check the lever height against the purge style rubber diaphragm to see if this is the issue. If it is, there is an activation lever height adjustment that you access by removing the cap that takes a hex head to open (the metal cap where the gas supply line connects into the unit). The lever adjustment also requires a hex wrench.

mriopel · 5th November 2007, 21:39

I think if you go to Dive Rite express on the Optima pg it has a link were you can get the diagram, I think it was about half down the page. If not call and ask Mark over there, If not call Ryan at DR in lake city he would know. The link says FX manual in pdf format, hope this helps a little.

Mike

n2diving · 7th November 2007, 01:20

Contact me for the link to the ADV maintenance manual, not allowed to post here.

devilgas · 8th November 2007, 18:56

Thanks everyone, got it ready for dives next week if the weather holds out.

28th October 2007, 18:15	#1 (permalink)
devilgas CCR Instructor Current Rebreather/s: Inspiration Classic Optima Other Rebreather/s: Inspiration Vision Evolution Join Date: Apr 2005 Location: FL, USA Posts: 191	O2ptima ADV schematic Does anyone have a service diagram for the ADV? Had one go tits up in Bonaire. Now have to make it work again after taking 1 each big screw driver to it to make it stop free flowing. __________________ www.deeptek.net Inspiration / Evolution, O2ptima Instructor
(Offline)

5th November 2007, 19:11	#2 (permalink)
*ScubaDadMiami* Moderator Current Rebreather/s: Optima Other Rebreather/s: Join Date: Sep 2005 Location: Florida, USA Posts: 2,132	Re: O2ptima ADV schematic Check the lever height against the purge style rubber diaphragm to see if this is the issue. If it is, there is an activation lever height adjustment that you access by removing the cap that takes a hex head to open (the metal cap where the gas supply line connects into the unit). The lever adjustment also requires a hex wrench. __________________ Howard Packer IANTD CCR Instructor Miami Beach, Florida CCRDiveTraining.com
(Online)

5th November 2007, 21:39	#3 (permalink)
mriopel Sadly Missed (RIP) Current Rebreather/s: Optima Dolphin Other Rebreather/s: Dolphin Join Date: Mar 2005 Location: usa Posts: 167	Re: O2ptima ADV schematic I think if you go to Dive Rite express on the Optima pg it has a link were you can get the diagram, I think it was about half down the page. If not call and ask Mark over there, If not call Ryan at DR in lake city he would know. The link says FX manual in pdf format, hope this helps a little. Mike Last edited by mriopel : 5th November 2007 at 21:45.
(Offline)

7th November 2007, 01:20	#4 (permalink)
n2diving Custom Title Allowed! Current Rebreather/s: Optima Other CCR Other Rebreather/s: Inspiration Classic Other CCR Join Date: Feb 2005 Location: Florida, USA Posts: 272	Re: O2ptima ADV schematic Contact me for the link to the ADV maintenance manual, not allowed to post here.
(Offline)

8th November 2007, 18:56	#5 (permalink)
devilgas CCR Instructor Current Rebreather/s: Inspiration Classic Optima Other Rebreather/s: Inspiration Vision Evolution Join Date: Apr 2005 Location: FL, USA Posts: 191	Re: O2ptima ADV schematic Thanks everyone, got it ready for dives next week if the weather holds out. __________________ www.deeptek.net Inspiration / Evolution, O2ptima Instructor
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode