Tracking Device for CCR P02?

Gregv · 5th December 2006, 21:58

Quote: (Originally Posted by dan@scuba-training.net)

I am attempting to use the "CSV" files exported from a VR3 computer in my deco software.

It seems that the second column is the depth, but cannot determine what sort units it is measured in.

It cannot be feet, nor meters...
cubits, or furlongs, perhaps?

This is a bit late, but the answer to your question is decimeters ie metres * 10. Don't know why.

The CSV file produced by the standalone PDLExport utility for the VR3 has several discrete blocks, but the [DIVEDATA] section has a record format as follows:

a, b, c, d, e, f, g, h

a=Index (sequential) - works out to be seconds / 10 since the unit records data at 10 seconds intervals
b=Depth in meters * 10
c=reserved
d=PPO in bar * 100 //(CCR 4th cell only). Other flavours may be set to 5
e=reserved
f=reserved
g=Check //dos prolog checksum. Index * recint for PDX import
h=reserved

This was never a supported feature and now I can't find it to download on the VR3 website. I have a zipped copy of PDLExport stashed away on my PC, so if anyone needs a copy, PM me.

Greg

5th December 2006, 21:58	#11 (permalink)
Gregv New Member Current Rebreather/s: Megalodon Dolphin Ray Home Build Other Rebreather/s: Dolphin Ray Home Build Join Date: May 2005 Location: Whangarei, New Zealand Posts: 30	Re: Tracking Device for CCR P02? Quote: (Originally Posted by dan@scuba-training.net) I am attempting to use the "CSV" files exported from a VR3 computer in my deco software. It seems that the second column is the depth, but cannot determine what sort units it is measured in. It cannot be feet, nor meters... cubits, or furlongs, perhaps? This is a bit late, but the answer to your question is decimeters ie metres * 10. Don't know why. The CSV file produced by the standalone PDLExport utility for the VR3 has several discrete blocks, but the [DIVEDATA] section has a record format as follows: a, b, c, d, e, f, g, h a=Index (sequential) - works out to be seconds / 10 since the unit records data at 10 seconds intervals b=Depth in meters * 10 c=reserved d=PPO in bar * 100 //(CCR 4th cell only). Other flavours may be set to 5 e=reserved f=reserved g=Check //dos prolog checksum. Index * recint for PDX import h=reserved This was never a supported feature and now I can't find it to download on the VR3 website. I have a zipped copy of PDLExport stashed away on my PC, so if anyone needs a copy, PM me. Greg
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode