Leak between loop and counterlung

stephenk · 12th February 2007, 22:19

Quote: (Originally Posted by jradomski)

Take of the o-rings from the t-piece and inspect for ridges.. I'm not sure if its still true, but the t-pieces from early last year required hand clean up of the t-pieces to remove the ridges left by the mold..

You can clean up the o-ring grooves with some sand paper if necessary..

Found a suspect ridge on the t piece and sanded it down and the leak is now fixed. many thanks joe.

***jradomski*** · 12th February 2007, 23:07

Quote: (Originally Posted by stephenk)

Found a suspect ridge on the t piece and sanded it down and the leak is now fixed. many thanks joe.

No problem.. Anytime

12th February 2007, 22:19	#11 (permalink)
stephenk New Member Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Feb 2006 Location: London Posts: 28	Re: Leak between loop and counterlung Quote: (Originally Posted by jradomski) Take of the o-rings from the t-piece and inspect for ridges.. I'm not sure if its still true, but the t-pieces from early last year required hand clean up of the t-pieces to remove the ridges left by the mold.. You can clean up the o-ring grooves with some sand paper if necessary.. Found a suspect ridge on the t piece and sanded it down and the leak is now fixed. many thanks joe.
(Offline)

12th February 2007, 23:07	#12 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Home Build Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Home Build Join Date: Mar 2005 Location: "Da" Bronx Posts: 2,871	Re: Leak between loop and counterlung Quote: (Originally Posted by stephenk) Found a suspect ridge on the t piece and sanded it down and the leak is now fixed. many thanks joe. No problem.. Anytime __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode