Meg lid o-ring size

decoweenie · 13th December 2006, 07:11

I have recently acquired a Meg package. It consists of an original lid with Smithers electronic and 2 cans manufactured in different time frames (i.e. a few years apart).

I was informed that there were about 6 revisions to the Meg which explains why the o-ring tolerance is tighter on one of my can over the other one.

Could anyone well versed with the Meg part dimensions tell me:

Has the lid OD remain the same between the 6 revisions ?
Has the can ID remain the same between the 6 revisions ?
What are the o-ring sizes between the 6 revisions ?

I just want to get some spare o-rings for the lid, so I want to get the appropriate size o-rings that I could use the correct one depending on which can I am diving with.

***Decodiver*** · 13th December 2006, 09:15

An email to Steve Stolen should solve these issues for you Phi.

Otherwise you are looking for someone who has had all 6 revisions..

Steve does answer mails (at least mine) rapidly.

Cheers,

Dave.

decoweenie · 13th December 2006, 09:45

Quote: (Originally Posted by Decodiver)

Steve does answer mails (at least mine) rapidly.

Thanks. Do you have Steve's email address ?

I didn't try since I have never had a single email reply from Leon yet when I inquired about the unit.

***Decodiver*** · 13th December 2006, 10:29

PM sent.

Cheers,

Dave.

decoweenie · 13th December 2006, 10:36

Quote: (Originally Posted by Decodiver)

PM sent.

Thanks again. Have some green!

13th December 2006, 07:11	#1 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,487	Meg lid o-ring size I have recently acquired a Meg package. It consists of an original lid with Smithers electronic and 2 cans manufactured in different time frames (i.e. a few years apart). I was informed that there were about 6 revisions to the Meg which explains why the o-ring tolerance is tighter on one of my can over the other one. Could anyone well versed with the Meg part dimensions tell me: Has the lid OD remain the same between the 6 revisions ? Has the can ID remain the same between the 6 revisions ? What are the o-ring sizes between the 6 revisions ? I just want to get some spare o-rings for the lid, so I want to get the appropriate size o-rings that I could use the correct one depending on which can I am diving with. __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM Last edited by decoweenie : 13th December 2006 at 08:50.
(Offline)

13th December 2006, 09:15	#2 (permalink)
*Decodiver* Administrator Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Jan 2005 Location: Geneva Posts: 2,194	Re: Meg lid o-ring size An email to Steve Stolen should solve these issues for you Phi. Otherwise you are looking for someone who has had all 6 revisions.. Steve does answer mails (at least mine) rapidly. Cheers, Dave. __________________ CCR/OC Trimix Instructor Trainer CCR Training to Mixed Gas in Switzerland, France, UK & Germany on Megalodon/COPIS-Megalodon/KISS/Sport KISS/Ouroboros/rEvo/Inspiration/Evolution/Sentinel www.zerogravitydiving.com Rebreather World Terms & Conditions
(Offline)

13th December 2006, 09:45	#3 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,487	Re: Meg lid o-ring size Quote: (Originally Posted by Decodiver) Steve does answer mails (at least mine) rapidly. Thanks. Do you have Steve's email address ? I didn't try since I have never had a single email reply from Leon yet when I inquired about the unit. __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM
(Offline)

13th December 2006, 10:29	#4 (permalink)
*Decodiver* Administrator Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Jan 2005 Location: Geneva Posts: 2,194	Re: Meg lid o-ring size PM sent. Cheers, Dave. __________________ CCR/OC Trimix Instructor Trainer CCR Training to Mixed Gas in Switzerland, France, UK & Germany on Megalodon/COPIS-Megalodon/KISS/Sport KISS/Ouroboros/rEvo/Inspiration/Evolution/Sentinel www.zerogravitydiving.com Rebreather World Terms & Conditions
(Offline)

13th December 2006, 10:36	#5 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,487	Re: Meg lid o-ring size Quote: (Originally Posted by Decodiver) PM sent. Thanks again. Have some green! __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode