Meg canister dimension ?

lilou · 23rd February 2006, 09:35

Hi all, is there anybody have the dimension of the canister of the Meg ?
Length, diameter and thickness.
I speak about the plastic piece not the alu body.

Thanks by advance

Lilian

joshhan2000 · 24th February 2006, 01:41

Call Leon and ask
if you want to know

***schford*** · 24th February 2006, 11:24

Quote: (Originally Posted by joshhan2000)

Call Leon and ask
if you want to know

Don't you think that Leon is greatful that we as a community answer so many questions for him - it probably saves hours of his time every day which helps him build more Megs

Unfortunatly my meg is over the other house so can not answer - can any one else please?

Stuart

silentscuba · 24th February 2006, 13:21

The Meg housing is 17 3/4" tall and 7" wide and thickness is 3/16". The dimensions of the clear plastic cannister that goes inside the housing is 8 3/4" long, 6" wide and is made of 3/16" acrylic. The overall dimensions are 9 3/4" long and 6 1/2" wide due to hardware that is attached to the cannister.

lilou · 24th February 2006, 17:25

Thank you very much Curt.

Best regards

Lilian

***schford*** · 24th February 2006, 17:51

good one curt - have a blob

jdicediver · 25th March 2007, 02:59

Quote: (Originally Posted by silentscuba)

The Meg housing is 17 3/4" tall and 7" wide and thickness is 3/16".

Is this the dimension of the can only, or the can and the head? What is the total length of the assembled Can?

Regards;

PacketSniffer · 25th March 2007, 17:57

Quote: (Originally Posted by jdicediver)

Is this the dimension of the can only, or the can and the head? What is the total length of the assembled Can?

Regards;

Total height is about 22" (depends on cable glands). The gas plenum (referred to as "can") with the head attached will fit into a *legal* carry-on with no room to spare length-wise.

teomannaskali · 7th July 2007, 17:25

Can some one please measure the size of the water trap apparatus aswell? The one that is at the bottom of the can attached to the bottom of the scrubber.

Thanks,

Teoman

23rd February 2006, 09:35	#1 (permalink)
lilou New Member Current Rebreather/s: Optima Other Rebreather/s: Not Bought Yet Join Date: May 2005 Location: South of the France Posts: 54	Meg canister dimension ? Hi all, is there anybody have the dimension of the canister of the Meg ? Length, diameter and thickness. I speak about the plastic piece not the alu body. Thanks by advance Lilian
(Offline)

24th February 2006, 01:41	#2 (permalink)
joshhan2000 New Member Current Rebreather/s: Not Bought Yet Other Rebreather/s: Not Bought Yet Join Date: Dec 2005 Location: olympia wa usa Posts: 46	Re: Meg canister dimension ? Call Leon and ask if you want to know
(Offline)

24th February 2006, 11:24	#3 (permalink)
*schford* Despotic Overlord Current Rebreather/s: Megalodon Sport Kiss Other Rebreather/s: Join Date: Jan 2005 Location: London, UK Posts: 3,671	Re: Meg canister dimension ? Quote: (Originally Posted by joshhan2000) Call Leon and ask if you want to know Don't you think that Leon is greatful that we as a community answer so many questions for him - it probably saves hours of his time every day which helps him build more Megs Unfortunatly my meg is over the other house so can not answer - can any one else please? Stuart __________________ Bailout and Kit Management account for Murphy's Law The only bad question is one you did not ask and later wish you had. Use of Rebreather World is subject to the Rebreather World Terms & Conditions of Use
(Offline)

24th February 2006, 17:25	#5 (permalink)
lilou New Member Current Rebreather/s: Optima Other Rebreather/s: Not Bought Yet Join Date: May 2005 Location: South of the France Posts: 54	Re: Meg canister dimension ? Thank you very much Curt. Best regards Lilian
(Offline)

24th February 2006, 17:51	#6 (permalink)
*schford* Despotic Overlord Current Rebreather/s: Megalodon Sport Kiss Other Rebreather/s: Join Date: Jan 2005 Location: London, UK Posts: 3,671	Re: Meg canister dimension ? good one curt - have a blob __________________ Bailout and Kit Management account for Murphy's Law The only bad question is one you did not ask and later wish you had. Use of Rebreather World is subject to the Rebreather World Terms & Conditions of Use
(Offline)

25th March 2007, 02:59	#7 (permalink)
jdicediver Single/burdened with cash Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Jun 2006 Location: Calgary, Alberta Posts: 256	Re: Meg canister dimension ? Quote: (Originally Posted by silentscuba) The Meg housing is 17 3/4" tall and 7" wide and thickness is 3/16". Is this the dimension of the can only, or the can and the head? What is the total length of the assembled Can? Regards; __________________ Regards; "Alterations performed under controlled conditions, on a closed course by a qualified Closed Circuit Diver" "Some people shouldn't dive...others shouldn't even get wet".
(Offline)

25th March 2007, 17:57	#8 (permalink)
PacketSniffer ~~~~~ #417 ~~~~~ Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Jun 2006 Location: Houston Posts: 431	Re: Meg canister dimension ? Quote: (Originally Posted by jdicediver) Is this the dimension of the can only, or the can and the head? What is the total length of the assembled Can? Regards; Total height is about 22" (depends on cable glands). The gas plenum (referred to as "can") with the head attached will fit into a legal carry-on with no room to spare length-wise. __________________ Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the gray twilight that knows not victory or defeat.
(Offline)

7th July 2007, 17:25	#9 (permalink)
teomannaskali Custom Title Allowed! Current Rebreather/s: Home Build Other Rebreather/s: Not Bought Yet Home Build Join Date: Feb 2006 Location: Istanbul TR Posts: 350	Re: Meg canister dimension ? Can some one please measure the size of the water trap apparatus aswell? The one that is at the bottom of the can attached to the bottom of the scrubber. Thanks, Teoman Last edited by teomannaskali : 7th July 2007 at 18:18.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode