ip recomendations...

snicks · 25th August 2008, 15:42

looking at the solenoid it reads:

0 - 17 bar
6VDC 0.6W

Looks like the Jaksa is good for 17 bars @6V which would be around 245 psi.
Dont know what voltage is actually put through to the solenoid by the electronics and what influence a lower voltage has on max pressure.

Never heard of someone using 17 bar as ip though
Greets
Dirk

***jradomski*** · 25th August 2008, 19:34

Quote: (Originally Posted by snicks)

looking at the solenoid it reads:

0 - 17 bar
6VDC 0.6W

Looks like the Jaksa is good for 17 bars @6V which would be around 245 psi.
Dont know what voltage is actually put through to the solenoid by the electronics and what influence a lower voltage has on max pressure.

Never heard of someone using 17 bar as ip though
Greets
Dirk

Those numbers make alot of sensor.. smaller orifice allows a greater IP at the same power requirements..

25th August 2008, 15:42	#11 (permalink)
snicks RBW Member Current Rebreather/s: Megalodon Other Rebreather/s: Inspiration Classic Join Date: Jul 2006 Location: Germany Posts: 44	Re: ip recomendations... looking at the solenoid it reads: 0 - 17 bar 6VDC 0.6W Looks like the Jaksa is good for 17 bars @6V which would be around 245 psi. Dont know what voltage is actually put through to the solenoid by the electronics and what influence a lower voltage has on max pressure. Never heard of someone using 17 bar as ip though Greets Dirk __________________ Weltmacht mit drei Buchstaben? ICH!
(Offline)

25th August 2008, 19:34	#12 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Join Date: Mar 2005 Location: "Da" Bronx Posts: 3,113	Re: ip recomendations... Quote: (Originally Posted by snicks) looking at the solenoid it reads: 0 - 17 bar 6VDC 0.6W Looks like the Jaksa is good for 17 bars @6V which would be around 245 psi. Dont know what voltage is actually put through to the solenoid by the electronics and what influence a lower voltage has on max pressure. Never heard of someone using 17 bar as ip though Greets Dirk Those numbers make alot of sensor.. smaller orifice allows a greater IP at the same power requirements.. __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode