Meg Calibration Plug - Any interest...?

netmage · 19th February 2008, 18:08

Hey folks...

I'm sure alot of you have seen some of the awesome design put together by Ken/Skipbreather in the library... Unfortunately, alot of us don't have access to machine shop tools to kick these little gems out...

I'm exploring at a few different ways to get some of these made, and wanted to guage interest for a community/group buy...

Guiding principles are: Help other folks, not looking to make any money, anything left over would be donated to Rebreather World, likely delivered in kit form (still thinking about the drilling/threading)

-Tim

diverklondike · 22nd February 2008, 17:47

Tim,

Here is a down and dirty cheap fix for this... Head off to your local Lowes or HomeDepot. They both carry rubber stoppers like you would have use in a chemistry class. That along with a fitting or two will give you the parts you need to make one in 10 minutes. I made one like this for my HH CCR and it works like a charm...

Dive Safe

Mark

19th February 2008, 18:08	#1 (permalink)
netmage Tim Owens Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Dec 2005 Location: Coconut Creek, FL Posts: 521	Meg Calibration Plug - Any interest...? Hey folks... I'm sure alot of you have seen some of the awesome design put together by Ken/Skipbreather in the library... Unfortunately, alot of us don't have access to machine shop tools to kick these little gems out... I'm exploring at a few different ways to get some of these made, and wanted to guage interest for a community/group buy... Guiding principles are: Help other folks, not looking to make any money, anything left over would be donated to Rebreather World, likely delivered in kit form (still thinking about the drilling/threading) -Tim
(Offline)

22nd February 2008, 17:47	#2 (permalink)
diverklondike Just one of the Peasants Current Rebreather/s: Inspiration Classic Other CCR Other Rebreather/s: Inspiration Classic Other CCR Join Date: Oct 2005 Location: Delaware, USA Posts: 1,613	Re: Meg Calibration Plug - Any interest...? Tim, Here is a down and dirty cheap fix for this... Head off to your local Lowes or HomeDepot. They both carry rubber stoppers like you would have use in a chemistry class. That along with a fitting or two will give you the parts you need to make one in 10 minutes. I made one like this for my HH CCR and it works like a charm... Dive Safe Mark
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode