0.003" orifice..take 4!!!!

cameron · 21st October 2008, 12:51

Hello

The order has gone in. They should be here in 2 months. Keep your eye on the thread towards the end of december.

I'll post payment details then.

Cam

DamselDiver · 10th November 2008, 21:12

Does anyone have the flow characteristics in LPM Vs. IP for the 0.003 orifice?

cameron · 12th November 2008, 11:56

Free Flow and Orifice Calculations by LENOX LASER - Online Orifice Sizing Calculator

Now you can figure out any flow of any gas at any presure to any presure.

I wanted .6 LPM at around 160psiG. It came up with a 0.003 orifice. Worked pretty good

I don't have a flow chart for the 0.003 but it basically requires another 40 pounds of back presure to give you the same flow rate as the 0.0035 orifice. Which is about another 80-90 feet of depth on the unit.
Hope this helps

Cam

cameron · 20th November 2008, 08:49

Hello

The orifaces have arrived.
For those on the list please make payment to

Camtakacs@yahoo.com via paypal

Please include your
RBW screen name and shipping info in the paypal interaction
and send me your shipping info via PM

30USD per oriface and 5USD per order for shipping

Once I have confirmation of your paypal transaction, I will ship the 2nd week of December.

DO NOT e-mail me, I will not respond.

Thanks

Thanks

heigo · 20th November 2008, 15:15

Money and green sent.

Thanks

fredrik · 21st November 2008, 18:01

Done!

Carl Ziegler · 21st November 2008, 18:46

Done

Gary Graham · 21st November 2008, 18:56

Done,

Cheers Cameron,

Gary

Divein · 21st November 2008, 19:08

Also done. Many thanks.

jogi · 24th November 2008, 06:38

Done & thanks !!

21st October 2008, 12:51	#31 (permalink)
cameron RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Apr 2005 Location: Toronto, Ontario, Canada Posts: 273	Re: 0.003" orifice..take 4!!!! Hello The order has gone in. They should be here in 2 months. Keep your eye on the thread towards the end of december. I'll post payment details then. Cam __________________ Reclaim at work and CCR at home, life is good
(Online)

10th November 2008, 21:12	#32 (permalink)
DamselDiver RBW Member Current Rebreather/s: Sport Kiss Other Rebreather/s: Sport Kiss Join Date: Dec 2007 Location: WPB Florida Posts: 21	Re: 0.003" orifice..take 4!!!! Does anyone have the flow characteristics in LPM Vs. IP for the 0.003 orifice?
(Offline)

12th November 2008, 11:56	#33 (permalink)
cameron RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Apr 2005 Location: Toronto, Ontario, Canada Posts: 273	Re: 0.003" orifice..take 4!!!! Free Flow and Orifice Calculations by LENOX LASER - Online Orifice Sizing Calculator Now you can figure out any flow of any gas at any presure to any presure. I wanted .6 LPM at around 160psiG. It came up with a 0.003 orifice. Worked pretty good I don't have a flow chart for the 0.003 but it basically requires another 40 pounds of back presure to give you the same flow rate as the 0.0035 orifice. Which is about another 80-90 feet of depth on the unit. Hope this helps Cam __________________ Reclaim at work and CCR at home, life is good Last edited by cameron : 12th November 2008 at 12:05.
(Online)

20th November 2008, 08:49	#34 (permalink)
cameron RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Join Date: Apr 2005 Location: Toronto, Ontario, Canada Posts: 273	Re: 0.003" orifice..take 4!!!! Hello The orifaces have arrived. For those on the list please make payment to Camtakacs@yahoo.com via paypal Please include your RBW screen name and shipping info in the paypal interaction and send me your shipping info via PM 30USD per oriface and 5USD per order for shipping Once I have confirmation of your paypal transaction, I will ship the 2nd week of December. DO NOT e-mail me, I will not respond. Thanks Thanks __________________ Reclaim at work and CCR at home, life is good Last edited by cameron : 20th November 2008 at 08:51.
(Online)

20th November 2008, 15:15	#35 (permalink)
heigo Petri Keskitalo Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Jun 2005 Location: Thailand/Sweden Posts: 118	Re: 0.003" orifice..take 4!!!! Money and green sent. Thanks __________________ P3
(Offline)

21st November 2008, 18:01	#36 (permalink)
fredrik Rekodeko. Sweden Current Rebreather/s: Classic Kiss Other CCR Other Rebreather/s: Other CCR Join Date: Apr 2005 Location: Sweden Posts: 191	Re: 0.003" orifice..take 4!!!! Done! __________________ Fredrik Rekodeko, Sweden http://www.rekodeko.se
(Offline)

21st November 2008, 18:46	#37 (permalink)
Carl Ziegler RBW Member Current Rebreather/s: Classic Kiss Other Rebreather/s: Classic Kiss Join Date: Oct 2007 Location: Helsingborg, Skåne, Sweden Posts: 6	Re: 0.003" orifice..take 4!!!! Done
(Offline)

21st November 2008, 18:56	#38 (permalink)
Gary Graham Classic KISS #103 Current Rebreather/s: Classic Kiss Other Rebreather/s: Inspiration Vision Join Date: Mar 2007 Location: St Helens, UK Posts: 121	Re: 0.003" orifice..take 4!!!! Done, Cheers Cameron, Gary __________________ CK#103
(Offline)

21st November 2008, 19:08	#39 (permalink)
Divein RBW Member Current Rebreather/s: Dolphin Home Build Other Rebreather/s: Dolphin Home Build Join Date: Jun 2006 Location: Yorkshire Posts: 107	Re: 0.003" orifice..take 4!!!! Also done. Many thanks.
(Offline)

24th November 2008, 06:38	#40 (permalink)
jogi RBW Member Current Rebreather/s: Classic Kiss RB80 / Clone Other Rebreather/s: RB80 / Clone Join Date: Feb 2006 Location: Germany Posts: 8	Re: 0.003" orifice..take 4!!!! Done & thanks !!
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode