Wiring in the VR3!

Jason Blackwell · 21st June 2005, 07:36

If anyone has had any doubts as to whether to drop off one of the displays and replace it with a VR3, all I can say is GO FOR IT!

Very easily done especially with the new Jetsam displays all you need to do is:

1 separate cell 1 (or 3, I suppose) display from the other two,

2 remove the wiring from the sensor pod glands

3 and replace with an original VR3 cable/Fischer plug. (Available from Jetsam or Delta P)

4 Reassemble

I wish I had done it sooner!

Now having just two displays and a VR3 on my arm it makes it just that little bit neater!

lizardland · 23rd June 2005, 10:40

Yeah but it's a pain in the arse undoing it when someone else has done it

New cable sheath, new face plate, new gland (because the old one was filled with silicone) and replacing all the wiring (what an absolute pain in the arse feeding two wires down a plastic tube is).

The KISS I bought had a VR3 conversion with one of the displays removed, I've since re-instated the third display so I now have the following for sale:

- VR3 connector (2-pin Fischer) and water-blocked cable
- 1 single display face plate
- 1 double display face plate

Make me an offer if anyone is interested.

Cheers,

Stuart

21st June 2005, 07:36	#1 (permalink)
Jason Blackwell Bloody Rebreathers! Current Rebreather/s: Inspiration Classic Sport Kiss Optima Dolphin Ray Other Rebreather/s: Not Bought Yet Inspiration Vision Evolution Classic Kiss Dolphin Ray Join Date: Feb 2005 Location: Brisbane, Queensland, AUSTRALIA Posts: 361	Wiring in the VR3! If anyone has had any doubts as to whether to drop off one of the displays and replace it with a VR3, all I can say is GO FOR IT! Very easily done especially with the new Jetsam displays all you need to do is: 1 separate cell 1 (or 3, I suppose) display from the other two, 2 remove the wiring from the sensor pod glands 3 and replace with an original VR3 cable/Fischer plug. (Available from Jetsam or Delta P) 4 Reassemble I wish I had done it sooner! Now having just two displays and a VR3 on my arm it makes it just that little bit neater! __________________ Jason Blackwell TDI Instructor Trainer #1358 Optima...Inspiration/Evolution...KISS...and what is next??? www.divedivedive.com.au OZTeK '09 March 2009 Sydney, Australia www.diveoztek.com.au
(Offline)

23rd June 2005, 10:40	#2 (permalink)
lizardland Yak Current Rebreather/s: MK 15.X Home Build Other Rebreather/s: Classic Kiss Home Build Join Date: Mar 2005 Location: North... Posts: 1,303	Yeah but it's a pain in the arse undoing it when someone else has done it New cable sheath, new face plate, new gland (because the old one was filled with silicone) and replacing all the wiring (what an absolute pain in the arse feeding two wires down a plastic tube is). The KISS I bought had a VR3 conversion with one of the displays removed, I've since re-instated the third display so I now have the following for sale: - VR3 connector (2-pin Fischer) and water-blocked cable - 1 single display face plate - 1 double display face plate Make me an offer if anyone is interested. Cheers, Stuart
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode